hi!
i have a
- ONEFORALL URC 7962 and a
- zbox nano.
everything worked fine until the update.
i checked
mediacenter:/dev/input # ir-keytable
Found /sys/class/rc/rc1/ (/dev/input/event13) with:
Driver em28xx, table rc-pinnacle-pctv-hd
Supported protocols: rc-5 nec rc-6
Enabled protocols: rc-5
Name: 2-5: em28178#0 IR
bus: 3, vendor/product: 2013:025f, version: 0x0001
Repeat delay = 500 ms, repeat period = 125 ms
Found /sys/class/rc/rc0/ (/dev/input/event4) with:
Driver nuvoton-cir, table rc-rc6-mce
Supported protocols: unknown other lirc rc-5 rc-5-sz jvc sony nec sanyo mce-kbd rc-6 sharp xmp
Enabled protocols: lirc
Name: Nuvoton w836x7hg Infrared Remote
bus: 25, vendor/product: 1050:00c5, version: 0x0062
Repeat delay = 500 ms, repeat period = 125 ms
mediacenter:/dev/input # ir-keytable -t -d /dev/input/event4
Testing events. Please, press CTRL-C to abort.
nothing happens when pressing keys on the remote.
dmesg:
[ 3.008765] nuvoton-cir 00:07: found NCT6779D or compatible: chip id: 0xc5 0x62
[ 3.043319] Registered IR keymap rc-rc6-mce
[ 3.043479] input: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:07/rc/rc0/input7
[ 3.044471] rc rc0: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:07/rc/rc0
[ 3.046472] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81d31440)
[ 3.054433] lirc_dev: IR Remote Control driver registered, major 245
[ 3.059184] IR LIRC bridge handler initialized
[ 3.063650] rc rc0: lirc_dev: driver ir-lirc-codec (nuvoton-cir) registered at minor = 0
[ 3.063699] nuvoton-cir 00:07: driver has been successfully loaded
this looks quite ok!?
i have no idea where to start searching.
any ideas?
thanks