OTT Mxq Pro 4k replacing remote.conf

kings322 · December 31, 2016 at 1:36 PM

Hello,

I have installed the 7.0.2.009 build on to my OTT MXQ pro 4k and some buttons on the remote are not working. I tried using WinSCP to delete and copy over the remote.conf to the /flash folder. Every time that I try I get an error. Is there another program that I can use to remove the remote.conf and replace it? What could be causing this error?

Thank you

**mmpp** · December 31, 2016 at 2:18 PM

You can place your own remote.conf in the configuration directory. The easiest way is to enable Samba on your MXQ and use the windows file explorer to access the box.

kings322 · December 31, 2016 at 3:03 PM

That fixed my problem.

Thanks

waseem · March 20, 2017 at 9:43 AM

Hi
Plz how n where to put remote.conf
Tell me exect directory

waseem · March 21, 2017 at 12:09 PM

I have now working remote.conf
But vol- volume+ button not working
Those button yellow in blue colours

waseem · March 21, 2017 at 5:17 PM

#*********************************************************************************************************
#this file is configuration for each factory remote device
# work_mode 0 :software mode 1 :hardware mode
# repeat_enable 0 :disable repeat 1 :enable repeat
#
# factory_code each device has it's unique factory code.
# pattern:custom_code(16bit)+index_code(16bit)
# examble: 0xff000001 = 0xff00(custom cod) 0001 (index)
#
# release_delay unit:ms.release will report from kernel to user layer after this period of time
# from press or repeat triggered.
#
# debug_enable 0 :debug disable 1 :debug disable
#
# SW MODE:
# bit_count how many bits in each frame
# tw_leader_act time window for leader active
# tw_bit0 time window for bit0 time.
# tw_bit1 time window for bit1 time
# tw_repeat_leader time window for repeat leader
# REG
# reg_base_gen set value for PREG_IR_DEC_BASE_GEN
# reg_control set value for PREG_IR_DEC_CONTROL
# reg_leader_act set value for PREG_IR_DEC_LEADER_ACTIVE
# reg_leader_idle set value for PREG_IR_DEC_LEADER_IDLE
# reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
# reg_bit0_time set value for PREG_IR_DEC_BIT0_TIME
#*************************************************************************************************************
#amlogic NEC remote
factory_code = 0xfe010000
work_mode = 0
repeat_enable = 1
repeat_delay = 40
repeat_peroid = 39
release_delay = 121
debug_enable = 1

fn_key_scancode = 0x00
left_key_scancode = 0x51
right_key_scancode = 0x50
up_key_scancode = 0x16
down_key_scancode = 0x1a
ok_key_scancode = 0x13

mouse_begin
0 0x51 //mouse key left
1 0x50 //mouse key right
2 0x16 //mouse key up
3 0x1a //mouse key down
mouse_end
key_begin
0x11 102 #HOME
# 0x19 158 #EXIT
0x19 14 #EXIT
0x4c 125 #SETUP(MENU)
0x40 116 #ON/OFF
0x18 115 #VOL+
0x10 114 #VOL-
0x16 103 #UP
0x51 105 #LEFT
0x13 97 #DPAD_CENTER
0x50 106 #RIGHT
0x1a 108 #DOWN
0x41 113 #MUTE
0x5a 119 #PLAY_PAUSE
0x0a 257 #MUSIC
0x49 261 #PICTURE PLAYER
0x4d 263 #SHORTCUT_VIDEOPLAYER
0x48 262 #SHORTCUT_FILEBROWSER
0x03 217 #SEARCH
0x0e 70 #267->WEBSITE #70-->EXPLORE
0x43 127 #SETTINGS
0x54 120 #FAST_FORWARD
0x55 121 #REWIND
0x59 122 #PREV
0x58 123 #NEXT
0x4e 2 #1
0x0d 3 #2
0x0c 4 #3
0x4a 5 #4
0x09 6 #5
0x08 7 #6
0x46 8 #7
0x05 9 #8
0x04 10 #9
0x01 11 #0
0x42 14 #DEL
0x52 128 #MEDIA_STOP
0x45 264 #ONEKEY_ZOOM
0x06 265 #SHORTCUT_SUBTITLE
0x44 262 #SHORTCUT_AUDIO
0x0f 255 #MAIN_MENU
0x12 269 # F9
key_end
Working good

OTT Mxq Pro 4k replacing remote.conf

Similar Threads

[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

[8.0.2e] LibreELEC 8.0 for S905/S905X