Hi, I recently upgraded my KODI hardware to Asus ExpertCenter PN42 (Intel N100 processor), which states it does have the HDMI CEC support (there is a dedicated settings in BIOS). However, the KODI player does not respond to any button presses on my Samsung One Remote. In the previous setup with Venztech V12 Ultra (Amlogic S912) box it worked well. Moreover, there is no CEC Adapter in Kodi's settings/system/input/pheriperals. I am using the latest LibreELEC-Generic.x86_64-12.0.2.img.gz. To have it a bit more complicated the KODI box is connected to Denon receiver, which is then connected to Samsung TV. However in this setup the previous Venztech box worked well with CEC. Any suggestions? Thanks
HDMI-CEC not working on Intel N100
-
jumperr -
May 23, 2025 at 8:06 AM -
Thread is Unresolved
-
-
Update using this tar file: https://chewitt.libreelec.tv/testing/LibreE…_64-12.80.2.tar
I've enabled CONFIG_DRM_DISPLAY_DP_AUX_CEC in the kernel config. The CEC config for HDMI appears to be enabled already but on cheap devices there's probably an LSPCON providing HDMI output so technically it's a DP connection and enabling CEC for DP might be needed (although I'm guessing a little here).
-
Hi Chewitt, many thanks. I put the file into /storage/.update and rebooted. However now the device does not boot at all, just jumps into bios after restart. Would you be so kind a prepare the .img file from it so I can burn it on USB stick and do the clean reinstall? Thanks. Pavel
-
In addition: somewhere I read that the libcec is by default disabled in LibreELEC generic build and that adding this to build options should help: CEC_FRAMEWORK_SUPPORT="yes"
-
Hi Chewitt, I was wrong, the device finally booted and I see the version installed as LibreELEC (chewitt) version 12.80.2. However the CEC is still not present in settings/system/input/pheripherials nor it is working. Any idea? I want to avoid buing the Pulse eight CEC adapter but maybe it will be only option.
-
It was updating library DB files to the newer version (the image is LE13/K22).
I've enabled the CEC build option and pushed an updated image.
