gigabyte brix n100 video problems.

uvby · January 28, 2024 at 8:57 PM

hi, i have brought this mini pc (https://www.gigabyte.com/Mini-PcBarebon…-N100-rev-10#kf) as my new mediaplayer.

it has 2 hdmi and 1 dp outputs (not used).

new installed libreelec 12 nightly (LibreELEC-Generic.x86_64-12.0-nightly-20240127-40b8914.img.gz)

the problems:

hdmi #1: get black screen flickering in playback (any resolution). (the black screen was at 21:38 for ~2 sec)

https://mega.nz/file/34YV2TpB#lOp-lNzwOWEm9Tk00xXrrlh9FPxtVfajps4K2NwZRTI

hdmi #2: i can only use 50-60 hz refresh rate at 1080p and 4k, with lower or higher refresh rate i get no output.

https://mega.nz/file/jt4w3baa#2Tl8zyN73mIbwsDRbDkOypsRV_tR5gMY3D6D91uBFUw

Sorry for large files i checked a lot things because i didn't know wath u need to help.

**Da Flex** · January 29, 2024 at 3:09 AM

We don't accept incomplete logs. Activate debug logging, use pastekodi from SSH, and post the resulting URL.

uvby · January 29, 2024 at 1:35 PM

ok i made the way you sayd.

https://paste.libreelec.tv/positive-mackerel.log

i got black flickering:

14:23
14:29
14:32

**Da Flex** · January 29, 2024 at 2:59 PM

Code

2024-01-29 14:05:42.821 T:1271     info <general>: Disabled debug logging due to GUI setting. Level 0.

As you can see, still log level 0. Did you reboot after activating debug log? The other method is using advancedsettings.xml. Then you don't have the HUD at GUI. Reboot is necessary for that method, too.