Hey guys
I work hard to get hyperion running on Wetek play (the first version of wetek, delivered with openelec as sponsor and changed to libreelec).
It is wired, because the whole setup is running with the same hyperion.config.json on the rpi if i move the adalight hardware from Wetek to Rpi.
Let me describe, how is my setup:
Rasperry with liebreelec 7.90.008: rpi --> /dev/ttyUSB0 --> arduino-nano --> WS2812B-stripes
Wetek with liebreelec 7.90.008: wetek --> /dev/ttyUSB0 --> arduino-nano --> WS2812B-stripes
As seen, the same hardware on both systems. Tried also the stable 7.0.2
What´s working on rpi or what do I use? (all is working fine)
- Menu
- Video
- pvr.vdr.vnsi with streaming from VDR and records
What´s working on wetek?
- Menu
- Video
If i looking through pvr.vdr.vnsi no hyperion is working and also the recordings doesn´t work with hyperion.
I tried to change the grabbing device, but that doesn´t solve the issue.
I searched for other hints in forum, but found no solution. If you need any logs, please let me know.
Attached the hyperion.config.json who I use on both systems:
Edited:
It´s realy wired. After trial and error I found the solution. It seems, that the "priority" was the issue. Don´t knwo why the exchange from both priorities settings solved that.
Attached the working config, too.