Hello,
I would need to change the settings from 2.4Ghz to 5Ghz.
I tried various cmd (from ssh) but without success.
There is nothing like a channel in connman settings?
Code
LibreELEC:~ # iw dev wlan0 set channel 3
command failed: Device or resource busy (-16)When I stoped thetering using connman - i cannot run wifi ap 
Code
LibreELEC:~ # iw dev wlan0 set type ap
You need to run a management daemon, e.g. hostapd,
see http://wireless.kernel.org/en/users/Documentation/hostapd
for more information on how to do that.There is no option in connman config setting (cat /storage/.cache/connman/settings)
So still 2.4Ghz - channel 1.
Code
LibreELEC:~iw dev wlan0 info
Interface wlan0
ifindex 3
wdev 0x1
addr dc:a6:32:92:94:6e
ssid jopr3
type AP
wiphy 0
channel 1 (2412 MHz), width: 20 MHz, center1: 2412 MHz
txpower 31.00 dBmThank you for your help
