Hi,
Just over the weekend, in the last 5 days, CEC remote, suddenly stopped working on my setup.
Raspberry goes into switcher box, then to Amplifier, then to TV.
I have tried eliminating everything and just plugging Raspberry Pi directly to the TV.
Still nothing. I even tried rebuilding the SD Card. Tried version 9.97, but was on 10.0 previously and it was working fine.
Rebuilt SD Card to version 10.0 again fresh. Still not working.
Apart from that KODI itself is working fine.
Tried changing and updating cables even to new cables.
No rhyme or reason. The only thing I haven't changed, is the HDMI to micro HDMI adapter.
Could that be causing the issue??
LG TV used to detect the connection as KODI in the HDMI input source. Now it just shows as RECORDER.
This is driving me crazy? Any ideas? 
*edit. This is what I get when I do a cec-ctl -S
Kodi-Lounge:~ # cec-ctl -S
Driver Info:
Driver Name : vc4_hdmi
Adapter Name : vc4
Capabilities : 0x0000010e
Logical Addresses
Transmit
Passthrough
Connector Info
Driver version : 5.10.52
Available Logical Addresses: 1
DRM Connector Info : card 0, connector 32
Physical Address : 1.0.0.0
Logical Address Mask : 0x0002
CEC Version : 1.4
Vendor ID : 0x001582 (Pulse-Eight)
OSD Name : ''
Logical Addresses : 1 (Allow Fallback to Unregistered)
Logical Address : 1 (Recording Device 1)
Primary Device Type : Record
Logical Address Type : Record
System Information for device 0 (TV) from device 1 (Recording Device 1):
CEC Version : Tx, OK, Rx, Timeout
Physical Address : Tx, OK, Rx, Timeout
Vendor ID : Tx, OK, Rx, Timeout
OSD Name : Tx, OK, Rx, Timeout
Topology:
1.0.0.0: Recording Device 1
