No video out when I first start my RPI4 and afterwards start my tv

    Edit: it is fixed:

    I followed this https://wiki.libreelec.tv/configuration/edid#intel and follwed the intel steps, but the extlinux.conf or syslinux.cfg didn't exist, so instead I added

    Code
    drm.edid_firmware=HDMI-A-1:edid/edid-HDMI-A-1.bin video=HDMI-A-1:1920x1080M@60D

    To /flash/cmdline.txt


    Orifinal problem:

    I made a git bug report, but I wanted to know if someone else has the same problem?

    Describe the bug

    When I boot my raspberry pi an afterwards start my tv, I don't get video out. Even when I unplug and plug in the hdmi after they both are started.

    But when I first start my tv, and then boot my rpi it works fine

    To Reproduce

    Steps to reproduce the behavior:

    1. Install 9.95.5
    2. start RPi4
    3. Start soundbar (HEOS) and tv

    Informations

    • LE Version: 9.95.5
    • Hardware Platform: RPI4

    Log file

    Log from when the problem exists: http://ix.io/3rP7

    Log from when I first start the tv: http://ix.io/3rPa

    Additional context

    It worked fine when using LE 9.2.X

    I have my rpi4 connected to my soundbar, and the soundbar to the tv

    Edited once, last by thebakker (July 4, 2021 at 9:32 AM).

    Yeah, but someone on github commented this:

    Quote

    I'm closing the ticket because this is not a bug, it's the expected behaviour now RPi devices in LE10 no longer use legacy vendor drivers (behaviour is now consistent with other LE devices since ~2012).

    Follow the section on Intel GPUs https://wiki.libreelec.tv/configuration/edid and repeat for your RPi4. If you need further support please start a thread in the forums.


    So I'm looking at that now.

    I fixed it, see edit