Hello,
I have problem with a drivers for my PCTV USB DVB-S2 USB Card (461e rev. B8H9) in my Raspberry pi 4 with Libreelec 9.2.6. Do You have any driver addons for this setup or any idea to make it work? 
lsusb:
Code
LibreELEC:~ # lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0513:0318 digital-X, Inc.
Bus 001 Device 004: ID 2013:0461 PCTV Systems
Bus 001 Device 003: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubor dmesg
Code
LibreELEC:~ # dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.127 (jenkins@prometheus) (gcc version 8.3.0 (GCC)) #1 SMP Sat Oct 24 15:01:22 EDT 2020
[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 256 MiB at 0x000000001bc00000
[ 0.000000] On node 0 totalpages: 950272
[ 0.000000] DMA zone: 1584 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 180224 pages, LIFO batch:63
[ 0.000000] HighMem zone: 770048 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4d8 with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu s37580 r8192 d23860 u69632
[ 0.000000] pcpu-alloc: s37580 r8192 d23860 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 948688
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:57:B3:C6 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=LABEL=System disk=LABEL=Storage quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 3481980K/3801088K available (10240K kernel code, 760K rwdata, 2256K rodata, 6144K init, 559K bss, 56964K reserved, 262144K cma-reserved, 3080192K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xec800000 - 0xff800000 ( 304 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xec000000 ( 704 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (6144 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 761 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 560 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 32912 entries in 97 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000017] Switching to timer-based delay loop, resolution 18ns
[ 0.000269] Console: colour dummy device 80x30
[ 0.000302] console [tty0] enabled
[ 0.000355] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.50 BogoMIPS (lpj=180000)
[ 0.000377] pid_max: default: 32768 minimum: 301
[ 0.000577] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000599] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001390] CPU: Testing write buffer coherency: ok
[ 0.001915] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002735] Setting up static identity map for 0x200000 - 0x20003c
[ 0.002934] rcu: Hierarchical SRCU implementation.
[ 0.005654] smp: Bringing up secondary CPUs ...
[ 0.006776] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.008009] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.009164] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.009313] smp: Brought up 1 node, 4 CPUs
[ 0.009330] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ 0.009344] CPU: All CPU(s) started in HYP mode.
[ 0.009356] CPU: Virtualization extensions available.
[ 0.010190] devtmpfs: initialized
[ 0.021468] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[ 0.021713] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.021741] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.028116] pinctrl core: initialized pinctrl subsystem
[ 0.029174] NET: Registered protocol family 16
[ 0.033265] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.034368] cpuidle: using governor ladder
[ 0.034417] cpuidle: using governor menu
[ 0.034946] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.034960] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.035188] Serial: AMBA PL011 UART driver
[ 0.039843] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.050202] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-06-26 14:49, variant start_x
[ 0.053549] raspberrypi-firmware soc:firmware: Firmware hash is b078012603a6a094178f959805996ad225a0d83b
[ 0.096164] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.100899] vgaarb: loaded
[ 0.101238] SCSI subsystem initialized
[ 0.101454] usbcore: registered new interface driver usbfs
[ 0.101512] usbcore: registered new interface driver hub
[ 0.101628] usbcore: registered new device driver usb
[ 0.102202] Advanced Linux Sound Architecture Driver Initialized.
[ 0.103270] clocksource: Switched to clocksource arch_sys_counter
[ 0.192564] FS-Cache: Loaded
[ 0.203126] NET: Registered protocol family 2
[ 0.203878] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.203908] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.203972] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.204048] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.204200] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.204236] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.204474] NET: Registered protocol family 1
[ 0.205148] RPC: Registered named UNIX socket transport module.
[ 0.205161] RPC: Registered udp transport module.
[ 0.205174] RPC: Registered tcp transport module.
[ 0.205187] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.205207] PCI: CLS 0 bytes, default 64
[ 0.229674] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.232235] Initialise system trusted keyrings
[ 0.232438] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 0.241764] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.242471] FS-Cache: Netfs 'nfs' registered for caching
[ 0.243045] NFS: Registering the id_resolver key type
[ 0.243090] Key type id_resolver registered
[ 0.243104] Key type id_legacy registered
[ 0.243128] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.243637] FS-Cache: Netfs 'cifs' registered for caching
[ 0.251383] Key type asymmetric registered
[ 0.251398] Asymmetric key parser 'x509' registered
[ 0.251595] bounce: pool size: 64 pages
[ 0.251655] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.251672] io scheduler noop registered (default)
[ 0.251687] io scheduler deadline registered
[ 0.251856] io scheduler cfq registered
[ 0.251870] io scheduler mq-deadline registered
[ 0.251885] io scheduler kyber registered
[ 0.252032] io scheduler bfq registered
[ 0.287609] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000
[ 0.287638] brcm-pcie fd500000.pcie: could not get clock
[ 0.287732] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.287786] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
[ 0.336659] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
[ 0.336936] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.336956] pci_bus 0000:00: root bus resource [bus 00-01]
[ 0.336978] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 0.337049] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 0.337279] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.340145] PCI: bus0: Fast back to back transfers disabled
[ 0.340171] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.340385] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.340471] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.340722] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 0.343432] PCI: bus1: Fast back to back transfers disabled
[ 0.343451] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
[ 0.343516] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 0.343539] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 0.343581] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.343605] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 0.343893] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.344120] pcieport 0000:00:00.0: Signaling PME with IRQ 53
[ 0.344330] pcieport 0000:00:00.0: AER enabled with IRQ 53
[ 0.344524] pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 0.350190] iproc-rng200 fe104000.rng: hwrng registered
[ 0.350495] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.351084] vc-sm: Videocore shared memory driver
[ 0.358039] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops 0xc0c5fa58)
[ 0.358636] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[ 0.358651] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.358663] [drm] No driver support for vblank timestamp query.
[ 0.358676] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
[ 0.598516] Console: switching to colour frame buffer device 240x67
[ 0.631850] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device
[ 0.644052] brd: module loaded
[ 0.644170] loop: module loaded
[ 0.665939] usbcore: registered new interface driver rtsx_usb
[ 0.667066] Loading iSCSI transport class v2.0-870.
[ 0.667525] iscsi: registered transport (tcp)
[ 0.669208] libphy: Fixed MDIO Bus: probed
[ 0.669248] tun: Universal TUN/TAP device driver, 1.6
[ 0.670088] bcmgenet fd580000.genet: failed to get enet clock
[ 0.670108] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
[ 0.670131] bcmgenet fd580000.genet: failed to get enet-wol clock
[ 0.670153] bcmgenet fd580000.genet: failed to get enet-eee clock
[ 0.670182] bcmgenet: Skipping UMAC reset
[ 0.670606] unimac-mdio unimac-mdio.-19: DMA mask not set
[ 0.683315] libphy: bcmgenet MII bus: probed
[ 0.710952] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
[ 0.711987] usbcore: registered new interface driver lan78xx
[ 0.712038] usbcore: registered new interface driver dm9601
[ 0.712107] usbcore: registered new interface driver smsc95xx
[ 0.712417] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.712451] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 0.715130] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
[ 0.715314] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 54
[ 0.716068] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.716086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.716103] usb usb1: Product: xHCI Host Controller
[ 0.716118] usb usb1: Manufacturer: Linux 4.19.127 xhci-hcd
[ 0.716133] usb usb1: SerialNumber: 0000:01:00.0
[ 0.716758] hub 1-0:1.0: USB hub found
[ 0.716825] hub 1-0:1.0: 1 port detected
[ 0.717317] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.717344] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 0.717368] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 0.717784] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 0.717801] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.717817] usb usb2: Product: xHCI Host Controller
[ 0.717832] usb usb2: Manufacturer: Linux 4.19.127 xhci-hcd
[ 0.717846] usb usb2: SerialNumber: 0000:01:00.0
[ 0.718393] hub 2-0:1.0: USB hub found
[ 0.718462] hub 2-0:1.0: 4 ports detected
[ 0.719867] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.720201] dwc_otg: FIQ enabled
[ 0.720214] dwc_otg: NAK holdoff enabled
[ 0.720226] dwc_otg: FIQ split-transaction FSM enabled
[ 0.720243] Module dwc_common_port init
[ 0.720673] usbcore: registered new interface driver uas
[ 0.720779] usbcore: registered new interface driver usb-storage
[ 0.720969] mousedev: PS/2 mouse device common for all mice
[ 0.721360] i2c /dev entries driver
[ 0.724046] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.726301] sdhci: Secure Digital Host Controller Interface driver
[ 0.726315] sdhci: Copyright(c) Pierre Ossman
[ 0.726994] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ 0.727578] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.731095] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.731163] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.732376] usbcore: registered new interface driver usbhid
[ 0.732381] usbhid: USB HID core driver
[ 0.732813] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 0.733876] [vc_sm_connected_init]: start
[ 0.740067] [vc_sm_connected_init]: end - returning 0
[ 0.740694] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 0.740706] [vc_sm_connected_init]: start
[ 0.740873] [vc_sm_connected_init]: installed successfully
[ 0.741960] NET: Registered protocol family 10
[ 0.742735] Segment Routing with IPv6
[ 0.742785] NET: Registered protocol family 17
[ 0.742843] Key type dns_resolver registered
[ 0.743042] Registering SWP/SWPB emulation handler
[ 0.743444] Loading compiled-in X.509 certificates
[ 0.748719] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 0.748776] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
[ 0.755169] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 0.755533] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
[ 0.755957] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 0.755964] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 0.780197] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.3
[ 0.780299] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.4
[ 0.796877] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.798517] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.800340] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.803291] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.804936] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.812532] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ 0.818858] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
[ 0.824117] console [netcon0] enabled
[ 0.824124] netconsole: network logging started
[ 0.824132] of_cfs_init
[ 0.824155] of_cfs_init: OK
[ 0.824392] ALSA device list:
[ 0.824400] No soundcards found.
[ 0.833283] Freeing unused kernel memory: 6144K
[ 0.833493] Run /init as init process
[ 0.848582] random: fast init done
[ 0.901615] Checking disk(s): LABEL=System LABEL=Storage
[ 0.923371] mmc0: new ultra high speed DDR50 SDHC card at address 1234
[ 0.923899] mmc1: new high speed SDIO card at address 0001
[ 0.924770] mmcblk0: mmc0:1234 SA32G 28.9 GiB
[ 0.927751] mmcblk0: p1 p2 < p5 p6 p7 >
[ 1.046618] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.187759] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
[ 1.187773] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.187786] usb 1-1: Product: USB2.0 Hub
[ 1.189403] hub 1-1:1.0: USB hub found
[ 1.189663] hub 1-1:1.0: 4 ports detected
[ 1.476646] usb 1-1.1: new full-speed USB device number 3 using xhci_hcd
[ 1.572878] usb 1-1.1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64
[ 1.572897] usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.572914] usb 1-1.1: Product: USB Serial
[ 1.649951] usb 1-1.2: new high-speed USB device number 4 using xhci_hcd
[ 1.740536] usb 1-1.2: New USB device found, idVendor=2013, idProduct=0461, bcdDevice= 1.00
[ 1.740544] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.740551] usb 1-1.2: Product: PCTV 461
[ 1.740557] usb 1-1.2: Manufacturer: PCTV
[ 1.740563] usb 1-1.2: SerialNumber: 0014071400
[ 1.813285] usb 1-1.3: new low-speed USB device number 5 using xhci_hcd
[ 1.909750] usb 1-1.3: New USB device found, idVendor=0513, idProduct=0318, bcdDevice= 1.00
[ 1.909758] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.918216] input: HID 0513:0318 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:0513:0318.0001/input/input0
[ 1.973524] hid-generic 0003:0513:0318.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0513:0318] on usb-0000:01:00.0-1.3/input0
[ 1.981627] input: HID 0513:0318 Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:0513:0318.0002/input/input1
[ 1.981819] input: HID 0513:0318 Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:0513:0318.0002/input/input2
[ 2.036721] input: HID 0513:0318 System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:0513:0318.0002/input/input3
[ 2.036824] hid-generic 0003:0513:0318.0002: input,hidraw1: USB HID v1.10 Mouse [HID 0513:0318] on usb-0000:01:00.0-1.3/input1
[ 2.640094] fsck: CP437: Invalid argument
[ 2.640235] fsck: fsck.fat 4.1 (2017-01-24)
[ 2.640444] fsck: /dev/mmcblk0p6: 251 files, 18541/65501 clusters
[ 2.640689] fsck: Storage: clean, 126158/940240 files, 1033033/3754752 blocks
[ 3.074133] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[ 3.442914] systemd[1]: System time before build time, advancing clock.
[ 3.449306] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[ 3.449637] systemd[1]: Detected architecture arm.
[ 3.452915] systemd[1]: Set hostname to <LibreELEC>.
[ 3.455208] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 3.646749] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.646924] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.671375] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[ 3.671433] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.684347] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 3.684503] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.684978] systemd[1]: Listening on udev Control Socket.
[ 3.687297] systemd[1]: Starting Show Version...
[ 3.687421] systemd[1]: Reached target RPC Port Mapper.
[ 3.772785] kernel-overlays-setup: setup base modules
[ 3.824299] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.127
[ 3.856802] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[ 3.856933] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
[ 3.859407] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf
[ 3.933720] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/4.19.127
[ 3.933865] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.dvb-latest.conf
[ 4.002328] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.dvb-latest/lib/modules/4.19.127
[ 4.002427] kernel-overlays-setup: running depmod
[ 5.960013] kernel-overlays-setup: done
[ 5.988041] wireguard: WireGuard 1.0.20200908 loaded. See www.wireguard.com for information.
[ 5.988049] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
[ 6.093718] systemd-journald[224]: Received request to flush runtime journal from PID 1
[ 7.559223] random: crng init done
[ 7.559232] random: 7 urandom warning(s) missed due to ratelimiting
[ 8.168749] mc: loading out-of-tree module taints kernel.
[ 8.169302] mc: Linux media interface: v0.10
[ 8.173879] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
[ 8.174109] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
[ 8.174324] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
[ 8.174563] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
[ 8.182584] videodev: Linux video capture interface: v2.00
[ 8.182593] WARNING: You are using an experimental version of the media stack.
[ 8.182593] As the driver is backported to an older kernel, it doesn't offer
[ 8.182593] enough quality for its usage in production.
[ 8.182593] Use it with care.
[ 8.182593] Latest git patches (needed if you report a bug to [email protected]):
[ 8.182593]
[ 8.183638] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 8.185682] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.209581] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.209829] bcm2835_codec: Unknown symbol vb2_core_expbuf_dmabuf (err -2)
[ 8.256748] usbcore: registered new interface driver usbserial_generic
[ 8.256796] usbserial: USB Serial support registered for generic
[ 8.257360] usbcore: registered new interface driver ch341
[ 8.257391] usbserial: USB Serial support registered for ch341-uart
[ 8.257401] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.257446] ch341 1-1.1:1.0: ch341-uart converter detected
[ 8.277754] usb 1-1.1: ch341-uart converter now attached to ttyUSB0
[ 8.333217] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.352161] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 8.360846] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 8.364032] usbcore: registered new interface driver brcmfmac
[ 8.755316] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 8.770104] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 9.086419] bcmgenet: Skipping UMAC reset
[ 9.143421] uart-pl011 fe201000.serial: no DMA platform data
[ 9.154138] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
[ 9.154646] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.279150] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.279163] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 10.160052] bcmgenet fd580000.genet eth0: Link is Down
[ 12.133132] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 15.734395] Bluetooth: Core ver 2.22
[ 15.734447] NET: Registered protocol family 31
[ 15.734453] Bluetooth: HCI device and connection manager initialized
[ 15.734468] Bluetooth: HCI socket layer initialized
[ 15.734478] Bluetooth: L2CAP socket layer initialized
[ 15.734503] Bluetooth: SCO socket layer initialized
[ 15.737981] Bluetooth: HCI UART driver ver 2.3
[ 15.737992] Bluetooth: HCI UART protocol H4 registered
[ 15.738042] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 15.738228] Bluetooth: HCI UART protocol Broadcom registered
[ 17.102402] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 17.103636] Bridge firewalling registered
[ 17.671608] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 23.635461] input: VNCServer Mouse as /devices/virtual/input/input4
[ 23.637817] input: VNCServer Keyboard as /devices/virtual/input/input5i try to find ready compilation with crazycat drivers but i didn't find them. Please help 