Install Problem RK3318 Bqeel R1 Pro

Azertix · March 29, 2020 at 10:04 PM

Hello.

Sorry for my bad english.

I am trying to install LibreELEC on a Bqeel R1 Pro with Rockchip RK3318.

The usual ways to boot to my usb key are not working (LibreELEC app and "reboot update" command).

So i tried with usb OTG cable connected to my computer, without DC cable connected but i am not able to boot in update mode.

Once my Android box started with OTG power supply, i use Terminal Emulator Android app to execute "reboot update" with su (root). The box just start normally...

Any solution please ?

Thanks a lot,

Azertix 😁

**chewitt** · March 30, 2020 at 6:10 AM Official Post

I moved the thread because you necro-bumped a 3-year old Amlogic thread so any advice on installing for the other Bqeel hardware is not going to be relavent to your Rockchip device.

BatterPudding · March 30, 2020 at 10:16 AM

Not only a necro Post, but a necro forumite attempts to respond...

Sorry, I can't help you. As chewitt says, this was a totally different box. The only thing we have in common is the sticker on the outside.

Good Luck

Azertix · April 13, 2020 at 5:55 PM

Hello. So what do you advice ?

Thanks

Azertix · April 15, 2020 at 5:47 PM

Hello. Finally i could boot an SD card flashed with LE USB-SD Creator.

But i issued several errors (see picture).

Next first error, i typed "exit" one time, LE logo apears, "exit" a second time and then i had a kernel panic.

Finally, screen and command prompt ended frozen.

Any advice?

Thanks

A3_2020 · June 6, 2020 at 3:48 PM

Do it with balenaEtcher burn one Sd Cart and one Usb stick put it in your box.

and it works.you can not put it on your flash memory rk3318.

you must be have a 912 or 905 chipset to put it on your flash with Aml burn tool.

download here: balenaEtcher - Flash OS images to SD cards & USB drives

if this works for you i hear from you.