Hi all,
I recently bough an audioinjector octo card to use with my RPi3B running libreELEC 8.95.
While setting up I ran into a few problems, due to beeing a newbie in the raspberry world.
I followed the setup guide and adopted the /flash/config.txt while appending following lines:
"aplay -l" still gives me:
LibreELEC:/flash # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 7/7
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
Display More
Trying to research the reason the new card is not detected, I called dmesg and got following error messages:
[ 6.638581] audioinjector-octo soc:sound: ASoC: CODEC DAI cs42448 not registered - will retry
[ 6.638598] audioinjector-octo soc:sound: snd_soc_register_card failed (-517)
The device tree setup debug messages via "vcdbg log msg" look unsuspecious so far.
By what I read online, the setup should be pretty self explaining, since all the drivers are already part of the os.
I guess I missed some settings. Does anyone have experience with setting up an external audio card or even the octo and could give me some advise?
I would highly appreciate this.
Thanks, mohawi