Hi,
please could you confirm, that my final reason to this issue is: "kernel is too new"
for my DVB-T usb dongle : EVOLVEO Venus
LibreELEC:~ # uname -a
Linux LibreELEC 4.11.12 #1 SMP Fri Apr 13 11:48:09 BST 2018 x86_64 GNU/Linux
lsusb:
Bus 001 Device 002: ID 048d:9006 Integrated Technology Express, Inc. IT9135 BDA Afatech DVB-T HDTV Dongle
LibreELEC:~ # dmesg | grep error
[ 14.143606] af9033: probe of 7-001d failed with error -5
or suggest some steps to fix it :). Or recommendation is welcomed. Thx Guys! Jan
dmesg:
Code
[ 14.008363] WARNING: You are using an experimental version of the media stack.
[ 14.008363] As the driver is backported to an older kernel, it doesn't offer
[ 14.008363] enough quality for its usage in production.
[ 14.008363] Use it with care.
[ 14.008363] Latest git patches (needed if you report a bug to [email protected]):
[ 14.008363] a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
[ 14.015630] dvb_usb_af9035 1-2:1.0: prechip_version=83 chip_version=01 chip_type=9135
[ 14.032132] usb 1-2: dvb_usb_v2: found a 'ITE 9135(9006) Generic' in warm state
[ 14.032137] dvb_usb_af9035 1-2:1.0: [0] overriding tuner from 00 to 38
[ 14.032138] dvb_usb_af9035 1-2:1.0: [1] overriding tuner from 00 to 38
[ 14.032746] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 14.032790] dvbdev: DVB: registering new adapter (ITE 9135(9006) Generic)
[ 14.033324] lirc_dev: IR Remote Control driver registered, major 244
[ 14.043403] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 14.043405] IR LIRC bridge handler initialized
[ 14.055511] intel_powerclamp: No package C-state available
[ 14.080637] af9033 7-001c: firmware version: LINK 12.54.14.0 - OFDM 2.47.14.0
[ 14.080640] af9033 7-001c: Afatech AF9033 successfully attached
[ 14.080651] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 14.084306] Registered IR keymap rc-rc6-mce
[ 14.102407] IR RC6 protocol handler initialized
[ 14.108286] it913x it9133ax-tuner.0.auto: ITE IT913X AX successfully attached
[ 14.108295] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 14.108349] dvbdev: DVB: registering new adapter (ITE 9135(9006) Generic)
[ 14.127813] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/rc/rc0/input8
[ 14.143606] af9033: probe of 7-001d failed with error -5
[ 14.144165] usbcore: registered new interface driver dvb_usb_af9035
[ 14.344280] mceusb 5-1:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
[ 14.344282] mceusb 5-1:1.0: 2 tx ports (0x3 cabled) and 2 rx sensors (0x1 active)
[ 14.344336] usbcore: registered new interface driver mceusb
[ 14.369748] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1884: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[ 14.369751] snd_hda_codec_analog hdaudioC0D0: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[ 14.369754] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 14.369755] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 14.369757] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 14.369759] snd_hda_codec_analog hdaudioC0D0: Mic=0x14
[ 14.369760] snd_hda_codec_analog hdaudioC0D0: Line=0x15
[ 14.430679] fuse init (API version 7.26)