[SOLVED] Remotes not recognised at all in kodi

sandmanza · January 20, 2018 at 2:39 AM

Hi

I installed libreelec 8.2.2 on my s905x based device and kodi doesnt recognise any remote however if I create a remote.conf in /storage/.config with debug and press a button then run dmesg -c I do see the command come through. I just have no idea why it is as if a remote doesnt even exist to kodi. The below is what I got for every button the remote has.

What could I be doing wrong here ?

[ 489.723540@0] remote: Wrong custom code is 0xf50af708 - Power

[ 491.823247@0] remote: Wrong custom code is 0xff00f708 - Up

[ 492.693017@0] remote: Wrong custom code is 0xfc03f708 - Left

[ 493.434872@0] remote: Wrong custom code is 0xe01ff708 - Ok

[ 494.330020@0] remote: Wrong custom code is 0xfd02f708 - Right

[ 495.037817@0] remote: Wrong custom code is 0xfe01f708 - Down

[ 496.814633@0] remote: Wrong custom code is 0xe31cf708 - Back

[ 497.462602@0] remote: Wrong custom code is 0xf30cf708 - Home

[ 498.152802@0] remote: Wrong custom code is 0x9f60f708 - Mouse

[ 498.988518@0] remote: Wrong custom code is 0xa25df708 - Vol Down

[ 501.175258@0] remote: Wrong custom code is 0xf20df708 - Mute

[ 501.951578@0] remote: Wrong custom code is 0xa758f708 - Vol Up

Thanks in advance

sandmanza · January 20, 2018 at 10:53 AM

I had typo in my factory_code

fixed working

m.sprotte · December 24, 2023 at 1:46 PM

Hello sandmanza,

did you know, what type of remote-control you are using for libreElec?

I've a Bananpi M5 with Lineage OS and looking for the Remote-Control, they are using. I've found in the DeviceTree the customcode 0xf708. When I googled the Code I've found yor Post.

Thanks in advance and Merry Chrismas

m.sprotte · December 25, 2023 at 7:07 PM

Hello sandmanza ,

sorry I've forgotten to mention you.