I try first time on Wetek Play2 with preparing a SD card, as Power ON, screen shows logo LibreELEC, then on upper left screen a txt show,
Error in mount_storage: mount_common: could not mount /dev/mmcblk0p2
How to handle that ?
Error on first attempt Wetek Play2
-
Rizwan -
December 5, 2017 at 7:12 AM -
Thread is Unresolved
-
-
If you want to use my community build - as far as I can tell that's what you're trying to use - you have to replace device tree on SD card, here's HOWTO with all instructions: [HOWTO + FAQ] Install community builds on S905/S905X/S912 device
This is not needed if you use official build or community build from Raybuntu.
-
Thank you for quick reply, please tell me how to replace the device tree and which software to use for this purpose ?
-
As I read your given guide, it say about device tree, from where I get and how to write in card ? please assist me
-
Device tree is provided in the same thread that you download the release from.
I honestly recommend that you use on official LibreELEC build that you can download from downloads – LibreELEC
Using an official build you don't need to worry about replacing device tree, configuring remote control etc.
-
As I read from your builds, from device tree, there, for my Box, file name as gxbb_p200_2G_wetek_play_2.dtb, so it rename and replace the one on card, is that correct, I also try official build, but same type error which I mention on first post