[closed] ir-keytable -- LibreELEC-Generic.x86_64-8.0.2

liberi · October 22, 2017 at 2:01 PM

Hello,

did LibreELEC 8.0.2 don t support the RC-6 protocol?

Code

LibreELEC:~ # uname -r
4.9.29
LibreELEC:~ # ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event10) with:
        Driver cx88xx, table rc-tevii-nec
        Supported protocols: lirc 
        Enabled protocols: lirc 
        Name: cx88 IR (TeVii S464 DVB-S/S2)
        bus: 1, vendor/product: d464:9022, version: 0x0001
        Repeat delay = 500 ms, repeat period = 125 ms
LibreELEC:~ #

Display More

Did the Kernel LibrELEC 4.9.29 support RC-6 ?

LibreELEC-Generic.x86_64-7.0.3

ir remote support

there i have RC-6 support with the same hardware.

**HiassofT** · October 22, 2017 at 2:19 PM

The IR receiver device you are using only seems to support the raw lirc protocol - which is a bit odd. Usually IR receiver devices typically support rc-5, rc-6 and nec and some of them in addition to that the lirc protocol.

Please test with the latest LE beta release (currently 8.1.2). If you still only see "lirc" listed under supported protocols you'll have to use Lirc for remote support - just enable Lirc in LE Settings->Services.

BTW: Up-to-date instructions on remote handling in LE 8.1 and newer are in the wiki: infrared_remotes [LibreELEC]

so long,

Hias

liberi · October 22, 2017 at 2:35 PM

The test with LibreELEC-Generic.x86_64-8.1.2 (beta)

Code

LibreELEC:~ # uname -r
4.11.12
LibreELEC:~ # ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event10) with:
        Driver cx88xx, table rc-tevii-nec
        Supported protocols: lirc 
        Enabled protocols: lirc 
        Name: cx88 IR (TeVii S464 DVB-S/S2)
        bus: 1, vendor/product: d464:9022, version: 0x0001
        Repeat delay = 500 ms, repeat period = 125 ms
LibreELEC:~ #

Display More

liberi · October 22, 2017 at 2:55 PM

The test with LibreELEC 7.0.3

Code

LibreELEC (official) Version: 7.0.3
LibreELEC:~ # uname -r
4.4.13
LibreELEC:~ # irkeytable
-sh: irkeytable: not found
LibreELEC:~ # ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event10) with:
        Driver cx88xx, table rc-tevii-nec
        Supported protocols: other lirc rc-5 jvc sony nec sanyo mce-kbd rc-6 sharp xmp 
        Enabled protocols: lirc rc-6 
        Name: cx88 IR (TeVii S464 DVB-S/S2)
        bus: 1, vendor/product: d464:9022, version: 0x0001
        Repeat delay = 1000 ms, repeat period = 125 ms
LibreELEC:~ #

Display More

With LibreELEC 7.0.3, kerne 4.4.13 my ir-remote works without problems.

Quote

Supported protocols: other lirc rc-5 jvc sony nec sanyo mce-kbd rc-6 sharp xmp

Enabled protocols: lirc rc-6

Name: cx88 IR (TeVii S464 DVB-S/S2)

liberi · October 22, 2017 at 3:04 PM

Code

##############################################
#                 LibreELEC                  #
#            http://libreelec.tv             #
##############################################

LibreELEC (official) Version: 8.0.2
LibreELEC:~ # ir-keytable
Found /sys/class/rc/rc1/ (/dev/input/event11) with:
        Driver serial_ir, table rc-rc6-mce
        Supported protocols: unknown other lirc rc-5 rc-5-sz jvc sony nec sanyo mce-kbd rc-6 sharp xmp 
        Enabled protocols: lirc rc-6 
        Name: Serial IR type home-brew
        bus: 25, vendor/product: 0001:0001, version: 0x0100
        Repeat delay = 500 ms, repeat period = 125 ms
Found /sys/class/rc/rc0/ (/dev/input/event10) with:
        Driver cx88xx, table rc-tevii-nec
        Supported protocols: lirc rc-6 
        Enabled protocols: lirc 
        Name: cx88 IR (TeVii S464 DVB-S/S2)
        bus: 1, vendor/product: d464:9022, version: 0x0001
        Repeat delay = 500 ms, repeat period = 125 ms
LibreELEC:~ # ir-keytable -s rc0 -c -w /usr/lib/udev/rc_keymaps/rc6_mce
Read rc6_mce table
Old keytable cleared
Wrote 63 keycode(s) to driver
Protocols changed to rc-6 
LibreELEC:~ # ir-keytable -r
scancode 0x800f0400 = KEY_NUMERIC_0 (0x200)
scancode 0x800f0401 = KEY_NUMERIC_1 (0x201)
scancode 0x800f0402 = KEY_NUMERIC_2 (0x202)
scancode 0x800f0403 = KEY_NUMERIC_3 (0x203)
scancode 0x800f0404 = KEY_NUMERIC_4 (0x204)
scancode 0x800f0405 = KEY_NUMERIC_5 (0x205)
scancode 0x800f0406 = KEY_NUMERIC_6 (0x206)
scancode 0x800f0407 = KEY_NUMERIC_7 (0x207)
scancode 0x800f0408 = KEY_NUMERIC_8 (0x208)
scancode 0x800f0409 = KEY_NUMERIC_9 (0x209)
scancode 0x800f040a = KEY_DELETE (0x6f)
scancode 0x800f040b = KEY_ENTER (0x1c)
scancode 0x800f040c = KEY_SLEEP (0x8e)
scancode 0x800f040d = KEY_MEDIA (0xe2)
scancode 0x800f040e = KEY_MUTE (0x71)
scancode 0x800f040f = KEY_INFO (0x166)
scancode 0x800f0410 = KEY_VOLUMEUP (0x73)
scancode 0x800f0411 = KEY_VOLUMEDOWN (0x72)
scancode 0x800f0412 = KEY_CHANNELUP (0x192)
scancode 0x800f0413 = KEY_CHANNELDOWN (0x193)
scancode 0x800f0414 = KEY_FASTFORWARD (0xd0)
scancode 0x800f0415 = KEY_REWIND (0xa8)
scancode 0x800f0416 = KEY_PLAY (0xcf)
scancode 0x800f0417 = KEY_RECORD (0xa7)
scancode 0x800f0418 = KEY_PAUSE (0x77)
scancode 0x800f0419 = KEY_STOP (0x80)
scancode 0x800f041a = KEY_NEXT (0x197)
scancode 0x800f041b = KEY_PREVIOUS (0x19c)
scancode 0x800f041c = KEY_NUMERIC_POUND (0x20b)
scancode 0x800f041d = KEY_NUMERIC_STAR (0x20a)
scancode 0x800f041e = KEY_UP (0x67)
scancode 0x800f041f = KEY_DOWN (0x6c)
scancode 0x800f0420 = KEY_LEFT (0x69)
scancode 0x800f0421 = KEY_RIGHT (0x6a)
scancode 0x800f0422 = KEY_OK (0x160)
scancode 0x800f0423 = KEY_EXIT (0xae)
scancode 0x800f0424 = KEY_DVD (0x185)
scancode 0x800f0425 = KEY_TUNER (0x182)
scancode 0x800f0426 = KEY_EPG (0x16d)
scancode 0x800f0427 = KEY_ZOOM (0x174)
scancode 0x800f0432 = KEY_MODE (0x175)
scancode 0x800f0433 = KEY_PRESENTATION (0x1a9)
scancode 0x800f0434 = KEY_EJECTCD (0xa1)
scancode 0x800f043a = KEY_BRIGHTNESSUP (0xe1)
scancode 0x800f0446 = KEY_TV (0x179)
scancode 0x800f0447 = KEY_AUDIO (0x188)
scancode 0x800f0448 = KEY_PVR (0x16e)
scancode 0x800f0449 = KEY_CAMERA (0xd4)
scancode 0x800f044a = KEY_VIDEO (0x189)
scancode 0x800f044c = KEY_LANGUAGE (0x170)
scancode 0x800f044d = KEY_TITLE (0x171)
scancode 0x800f044e = KEY_PRINT (0xd2)
scancode 0x800f0450 = KEY_RADIO (0x181)
scancode 0x800f045a = KEY_SUBTITLE (0x172)
scancode 0x800f045b = KEY_RED (0x18e)
scancode 0x800f045c = KEY_GREEN (0x18f)
scancode 0x800f045d = KEY_YELLOW (0x190)
scancode 0x800f045e = KEY_BLUE (0x191)
scancode 0x800f0465 = KEY_POWER2 (0x164)
scancode 0x800f046e = KEY_PLAYPAUSE (0xa4)
scancode 0x800f046f = KEY_PLAYER (0x183)
scancode 0x800f0480 = KEY_BRIGHTNESSDOWN (0xe0)
scancode 0x800f0481 = KEY_PLAYPAUSE (0xa4)
Enabled protocols: lirc rc-6 
LibreELEC:~ #

Display More

i will work with LibreELEC-Generic.x86_64-8.1.2 (beta)

More, there:

ir-keytable -- LibreELEC-Generic.x86_64-8.1.2