last try of Kodi vq patch amendment
After some hours testing - massive improvement for me (s905x). On problematic channels vq about 4-7% (15-20% on other channels) and freezes and caching gone. Thanks!
last try of Kodi vq patch amendment
After some hours testing - massive improvement for me (s905x). On problematic channels vq about 4-7% (15-20% on other channels) and freezes and caching gone. Thanks!
From 7.0.3.012e i have a constant caching issue on several live channels from tvheadend. It's not relevant to stream speed - 4k channels work fine, but some SD from satellite has caching issue. Many iptv channels caching every second.
7.0.3.012d works fine with all channels.
I think it happened after this patch:
mini m8s+ s905x
This screen issue really has me scratching my head. I've tried on my other plasma telly which has same problem when changing from menu 720p to 1080p movie
Try to use menu 1080p instead 720p
Please try entering this command over SSH and then play your video: echo 1 > /sys/module/amvdec_h264/parameters/error_recovery_mode.
It works for me. Thanks!
The patches I use for .010 have been in development build for 2 weeks IIRC and no one complained. Unfortunately I don't have a TVHeadend server nor any other PVR service to test. So far everyone else's results were very good and current a/v sync patch works best from all from what I can tell.
As I already say issue appear after any error in the stream from pvr. I'm recorded TS sample with that error at tenth second. For me, 008-fix plays this file with only small distortion at the tenth second. 009 and later starts play jerky after the tenth second.
sample.ts
PS. Kodi at RPi2 plays this file without any issues.
afl using your build on 1GB/8GB Mini MX I'm getting no sound and the output device is Bluetooth audio (PULSEAUDIO)?
Try to use dtb from 008. It works for me.
How about this build: http://kszaq.libreelec.tv/s905/devel/201...40a2a3.tar ?I'm trying to track down which change causes the issue. Thank you for your testing!
Issue still exist, but behavior changed. If before i had one stuttering pictures by about 1-2 secs, but now i have more frequent small stuttering - about 10 pictures in second. Also desync video and audio.
Yes, there was one change for ffmpeg. Here's the build with that change reverted: http://kszaq.libreelec.tv/s905/devel/201...9cf673.tar
Sorry, no changes - issue still present.
Please have a look at the next devel build: 2016-11-25This one has hardware demux buffering patch from 7.0.2.008 with a fix for low bitrate streams. Again, tested on my local samples, all playing well...
I have no improvement. Still start stuttering after a small error in the stream.
Sometime ago i had the same issue in another project. Problem was in ffmpeg. I can't remember what exactly was, but whether there was any change in ffmpeg from 008 to 009?
Any thoughts on the latest development build? People who experienced live TV stuttering, please?
To me, same as clean .009, no change.
T95N, S905, 2/8
I recorded simple with video stuttering problem.
In .009 at 1:42 video start stuttering to key frames.
In .008 at 1:42 just small error in picture.
Yandex.Disk
I personally have no issues with live dvb-t TV/Radio this way.
You just have fine signal. In 008 i don't have issue independently of tvheadend version.
Just a quick post to let you know that the stuttering bug when streaming live TV from a few tvheadend server is still here with the latest development build. I'm waiting for the next one ?
I have the same effect here with tvheadend. Stuttering appears after some error in the stream (bad signal or decoding error). Bug introduced in 009
On .009 i has not anymore bug with flickering red at the interlaced video.
But now at the settings/system/video i don't see refresh settings below 1280x720p
Live SD video from tvheadend sometimes plays jerky, as though the key frames. It happens when switching from HD or 4k to SD channels.
Some clicks/pops can appear when no audio is playing.
Confirmed this is happening on MiniMx S905 2g/16g & Nexbox A95x S905
I run simple HDMI to Box. Audio through TV.
Then i set Settings/System/Audio->Output configuration to fixed, clicks/pops gone.
I had 008 on internal emmc.I updated to 009 on my Internal emmc (not usb) but,
I did not put the device tree file in the update dir (stupid)
I now have no sound devices.
Can I fix this
yes, you should upload your dtb.img to your device. Then ssh to your device, go to directory with uploaded dtb.img and execute command:
then reboot device.
Has anyone noticed any pops/clicks like static on the audio since trying "LibreELEC-S905.aarch64-7.0-devel-20161028232312-r23412-g028df0e.img.gz"?S905 T95N 1GB/8GB/100mbit
I have the same effect.
S905 T95N 2/8/100
Strange screenshot image on 4k live. I see a previously seen HD channel image.
Yandex.Disk
Yandex.Disk