Posts by BlaBla1973

Quote from scottns

It's a GTX 950. System info shows Open GL 4.6.0 and Nvidia drivers 418.43.

I never got it started on my system, I use a 1050. I have the same gtx (?) error with every driver/version I tested.

Quote from 5schatten

Ca you try build RR-20190314-bdc55bc? I reverted the driver update and maybe this solves your problem.

works fine, thx for the downgrade

Quote from 5schatten

Kodi lists hdmi:CARD=NVidia,DEV=0 as device

Code

2019-03-13 20:20:59.509 T:140256358246144  NOTICE: Found 2 Lists of Devices
2019-03-13 20:20:59.509 T:140256358246144  NOTICE: Enumerated ALSA devices:
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:     Device 1
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_deviceName      : default
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_displayName     : Default (HDA NVidia HDMI 2)
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_displayNameExtra:
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_deviceType      : AE_DEVTYPE_PCM
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_channels        : FL, FR
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_sampleRates     : 32000,44100,48000,88200,96000,176400,192000
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_dataFormats     : AE_FMT_S32NE,AE_FMT_S16NE,AE_FMT_S16LE
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_streamTypes     : No passthrough capabilities
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:     Device 2
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_deviceName      : hdmi:CARD=NVidia,DEV=0
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_displayName     : HDA NVidia
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_displayNameExtra: HDMI #0
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_deviceType      : AE_DEVTYPE_HDMI
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_channels        : FL, FR
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_sampleRates     : 32000,44100,48000,88200,96000,176400,192000
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_dataFormats     : AE_FMT_S32NE,AE_FMT_S16NE,AE_FMT_S16LE,AE_FMT_RAW
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_streamTypes     : STREAM_TYPE_AC3,STREAM_TYPE_DTSHD,STREAM_TYPE_DTSHD_MA,STREAM_TYPE_DTSHD_CORE,STREAM_TYPE_DTS_1024,STREAM_TYPE_DTS_2048,STREAM_TYPE_DTS_512,STREAM_TYPE_EAC3,STREAM_TYPE_TRUEHD
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:     Device 3
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_deviceName      : hdmi:CARD=NVidia,DEV=1
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_displayName     : HDA NVidia
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_displayNameExtra: HDMI #1
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_deviceType      : AE_DEVTYPE_HDMI
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_channels        : FL, FR
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_sampleRates     : 32000,44100,48000,88200,96000,176400,192000
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_dataFormats     : AE_FMT_S32NE,AE_FMT_S16NE,AE_FMT_S16LE,AE_FMT_RAW
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_streamTypes     : STREAM_TYPE_AC3,STREAM_TYPE_DTSHD,STREAM_TYPE_DTSHD_MA,STREAM_TYPE_DTSHD_CORE,STREAM_TYPE_DTS_1024,STREAM_TYPE_DTS_2048,STREAM_TYPE_DTS_512,STREAM_TYPE_EAC3,STREAM_TYPE_TRUEHD
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:     Device 4
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_deviceName      : hdmi:CARD=NVidia,DEV=2
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_displayName     : HDA NVidia
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_displayNameExtra: HDMI #2
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_deviceType      : AE_DEVTYPE_HDMI
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_channels        : FL, FR
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_sampleRates     : 32000,44100,48000,88200,96000,176400,192000
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_dataFormats     : AE_FMT_S32NE,AE_FMT_S16NE,AE_FMT_S16LE,AE_FMT_RAW
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_streamTypes     : STREAM_TYPE_AC3,STREAM_TYPE_DTSHD,STREAM_TYPE_DTSHD_MA,STREAM_TYPE_DTSHD_CORE,STREAM_TYPE_DTS_1024,STREAM_TYPE_DTS_2048,STREAM_TYPE_DTS_512,STREAM_TYPE_EAC3,STREAM_TYPE_TRUEHD
2019-03-13 20:20:59.509 T:140256358246144  NOTICE: Enumerated PULSE devices:
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:     Device 1
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_deviceName      : Default
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_displayName     : Default
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_displayNameExtra: Bluetooth Audio (PULSEAUDIO)
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_deviceType      : AE_DEVTYPE_PCM
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_channels        : FL, FR
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_sampleRates     : 5512,8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,176400,192000,384000
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_dataFormats     : AE_FMT_U8,AE_FMT_S16NE,AE_FMT_S24NE3,AE_FMT_S24NE4,AE_FMT_S32NE,AE_FMT_FLOAT
2019-03-13 20:20:59.509 T:140256358246144  NOTICE:         m_streamTypes     : No passthrough capabilities

Display More

You're using DP-1 as connector

Code

2019-03-13 20:22:04.424 T:140252626810624 NOTICE: Display resolution ADJUST : DP-1: 1920x1080 @ 23.98Hz (22) (wei ght: 0.000)

So I don't see what's the problem Which output did you use at my older build?

Also post a full log zip.

You could try LibreELEC Testbuilds for x86_64 (Kodi 18.0) / libreelec-generic.x86_64-9.1-milhouse-20190311210303-#0311-g28f2bb3.tar so one of Milhouse test builds which is based on master too and check if Kodi audio is working. It's possible that something is broken in 418.43 so I would revert to 410.104.

Sorry for the delay.

The milhouse version(LibreELEC-Generic.x86_64-9.1-Milhouse-20190311210303-#0311-g28f2bb3) works without any problems.

Quote from 5schatten

Well even if the new driver is the problem you still did not provide any logs.

I did provide a log file, but the wrong one (?)

Here are my log files, tested the version RR-20190307 (and RR-20190308)

Quote from 5schatten

Well what has a movie to do with the emulator config?!

Correct! Nothing. So make sure you've configured Kodi properly then select a correct audio device in my addon and then you can provide logfiles if there is anything wrong. My config has absolutely nothing to do with missing audio while playing movies.

If you havent't changed your config you had hdmi:CARD=NVidia,DEV=0 in the past.

Correct, nothing.. the only thing i do is a update. Like always, but now I have no audio in kodi. So the new Nvidia driver or something is making a error in the Kodi config.

Quote from 5schatten

Try PulseAudio and if this fails too provide a log zip of both PulseAudio & ALSA after you've ran a game. Also why did you use HDMI 1,2,3 and what about HDMI0?

I've tried ALSA here on my Generic & RPi system and it works on both beside the missing ES sounds.

Will try, I've never got to test a game. After the update the first thing tested is a movie. HDMI 1,2&3 are available in the config, HDMI 0 not.

Quote from 5schatten

Do you use PulseAudio? Did you reboot after setting a different HDMI output?

No PulseAudio and I reboot every time after setting a different HDMI. In the older version it's working fine.

Quote from 5schatten

Read the changelogs & the FAQ

Sorry missed that part, thx

Edit:

Still no audio in kodi after the update and setup RR config (tested HDMI 1,2 and 3)

Quote from 5schatten

Build RR-20190308-82b98b0 is online

• added PulseAudio volume control for emulators & frontends -> use the slider in the RR Config audio section to adjust it to your needs
• updated to latest LE 9.x
• upgraded Generic & RPi kernel to 4.19.27
• updated to mesa-19.0.0-rc7
• updated vulkan to 1.1.102
• updated several libretro-cores
• updated citra & dolphin

If you run into problems use build 604e2e4 which does not support PulseAudio volume control.

I update from LibreELEC-Generic.x86_64-9.0-RR-201906-75729a1 to this one, no audio in kodi,

After the downgrade to : LibreELEC-Generic.x86_64-9.0-RR-201906-75729a1 it's working again.

Quote from 5schatten

If you ever thought about supporting the LibreELEC project then I think it's a good time to pass the team a beer to cover their expenses and show some love Sponsor – LibreELEC (nobody asked me to do so but I think we all profit from a well supported LE project )

Done!

Quote from 5schatten

Note: chewitt provided me some teamspace on the LE server so you can now use LibreELEC-Settings to update your builds. To do so set up the updated channel as described in post 1 | page 1 and update your systems. From now I'll only provide .img.gz to create sd-cards/usb-drives on my Gdrive account which you have to update afterwards.

Nice

Quote from 5schatten

Well I should have been more specific -> Docker works fine again so PCSX2 if it ran before. Maybe I'll find some time and mood to try it on my workstation again since otherwise I have no option to run PCSX2 with an Nvidia GPU

Quote from 5schatten

BlaBla1973 can you write a brief summary where to place the hotkey.ini and how to find out the correct button mapping & I could add this to the FAQ

It's a default dolphin file,

hotkeys.ini :

/storage/.config/dolphin-emu/

PCSX2 should work fine now -> kernel 4.20 fixed whatever was broken in 4.19

Still got the GS plugin error...

Quote from Marciano

Thank you very much.

I have a PS3 dualshock controller i assume this is also possible with this controller if i set this up right?

Yes

Quote from 5schatten

But still you would need an additional input device so IMHO it doesn't really matter if you need a controller or keyboard beside the Wiimote. Of course it's quite handy if you play games that work with a controller or gc stuff

You can map the home button from the wii controller?

And i play all games (ES/mame/gc/..) using the xbox controller, only for wii games a wii remote.

Quote from Marciano

That's great thanks i'll try this later.

How can i check if dolphin is configured properly?

So if understand it right there is no possiblity to return to ES from game with wiimote only with keyboard pressing escape then?

Yes you can, i use a xbox 360 controller for ES and for exit a wii/gc game in dolphine , i press the menu/big X button(button 8 ) on the xbox controller. For the Wii games i use a real wii remote.

So no need for a keyboard, you can set it up in the dolphine menu or edit your ini files.

From my hotkeys.ini :

Keys/Exit = `evdev/0/Xbox 360 Wireless Receiver:Button 8`

From my Dolphin.ini

[Interface]
ConfirmStop = False

5schatten There is a typo in :

V. Kodi Themes & Custom Skins

Emulationstation

# /usr/bin/frontend-frontend-pegasus-fe.py --> frontend-pegasus-fe.py

After update from RC1 to RC2 , i lost my SSH / SFTP connection..

Network is fine .. But no SSH

Downgrade to RC1 fix the problem..

Update to Beta 16 went smoothly.

Thx