Posts by MMD

  • Samsung Remote for rpi 4 media center with libreelec 9.2

    dtoverlay=gpio-ir brought partial success

    LibreELEC (official): 9.2.0 (RPi4.arm)

    HDDREC2020:~ # ir-keytable

    Found /sys/class/rc/rc0/ (/dev/input/event3) with:

    Name: gpio_ir_recv

    Driver: gpio_ir_recv, table: rc-rc6-mce

    lirc device: /dev/lirc0

    Supported protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon rc-mm

    Enabled protocols: lirc

    bus: 25, vendor/product: 0001:0001, version: 0x0100

    Repeat delay = 500 ms, repeat period = 125 ms

    maybe i need to activate the correct keymap for my remote ?!

  • Samsung Remote for rpi 4 media center with libreelec 9.2

    It seems, that the driver is not loaded. ?!?

    HDDREC2020:~ # ir-keytable

    /sys/class/rc/: No such file or directory

    No devices found

    HDDREC2020:~ # cat /proc/bus/input/devices

    I: Bus=0003 Vendor=1a2c Product=0027 Version=0110

    N: Name="USB USB Keykoard"

    P: Phys=usb-0000:01:00.0-1.3/input0

    S: Sysfs=/devices/platform/scb/http://fd500000.pcie/pci0000:00/000…01/input/input0

    U: Uniq=

    H: Handlers=sysrq kbd leds event0

    B: PROP=0

    B: EV=120013

    B: KEY=10000 7 ff800000 7ff febeffdf f3cfffff ffffffff fffffffe

    B: MSC=10

    B: LED=7

    I: Bus=0003 Vendor=1a2c Product=0027 Version=0110

    N: Name="USB USB Keykoard Consumer Control"

    P: Phys=usb-0000:01:00.0-1.3/input1

    S: Sysfs=/devices/platform/scb/http://fd500000.pcie/pci0000:00/000…02/input/input1

    U: Uniq=

    H: Handlers=kbd event1

    B: PROP=0

    B: EV=1f

    B: KEY=300ff 0 0 0 0 483ffff 17aff32d bf544446 0 0 1 130c73 b17c000 267bfa d9415fed 9e1680 4400 0 10000002

    B: REL=40

    B: ABS=1 0

    B: MSC=10

    I: Bus=0003 Vendor=1a2c Product=0027 Version=0110

    N: Name="USB USB Keykoard System Control"

    P: Phys=usb-0000:01:00.0-1.3/input1

    S: Sysfs=/devices/platform/scb/http://fd500000.pcie/pci0000:00/000…02/input/input2

    U: Uniq=

    H: Handlers=kbd event2

    B: PROP=0

    B: EV=13

    B: KEY=c000 100000 0 0 0

    B: MSC=10

    I: Bus=0000 Vendor=0000 Product=0000 Version=0000

    N: Name="lircd-uinput"

    P: Phys=

    S: Sysfs=/devices/virtual/input/input3

    U: Uniq=

    H: Handlers=sysrq kbd event3 rfkill

    B: PROP=0

    B: EV=100003

    B: KEY=ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe

    I: Bus=0000 Vendor=0000 Product=0000 Version=0000

    N: Name="eventlircd"

    P: Phys=/dev/input/event3

    S: Sysfs=/devices/virtual/input/input4

    U: Uniq=

    H: Handlers=event4

    B: PROP=0

    B: EV=3

    B: KEY=ff ffffffff 0 0 0 0 f 0 0 0 0 0 0 3ffff 7fff8fff ff03ff 0 0 0 0 0 0 0 0

    HDDREC2020:~ # dmesg

    [ 0.000000] Booting Linux on physical CPU 0x0

    [ 0.000000] Linux version 4.19.83 (jenkins@tsuboi) (gcc version 8.3.0 (GCC)) #1 SMP Sat Nov 23 01:54:59 CET 2019

    [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d

    [ 0.000000] CPU: div instructions available: patching division code

    [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

    [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1

    [ 0.000000] Memory policy: Data cache writealloc

    [ 0.000000] cma: Reserved 256 MiB at 0x000000001bc00000

    [ 0.000000] On node 0 totalpages: 442368

    [ 0.000000] DMA zone: 1584 pages used for memmap

    [ 0.000000] DMA zone: 0 pages reserved

    [ 0.000000] DMA zone: 180224 pages, LIFO batch:63

    [ 0.000000] HighMem zone: 262144 pages, LIFO batch:63

    [ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4d4 with crng_init=0

    [ 0.000000] percpu: Embedded 17 pages/cpu s37580 r8192 d23860 u69632

    [ 0.000000] pcpu-alloc: s37580 r8192 d23860 u69632 alloc=17*4096

    [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

    [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 440784

    [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=DC:A6:32:26:BF:56 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=UUID=2311-4421 disk=UUID=4a7717ae-4e4f-431a-86cf-643c8bb8834a quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1

    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

    [ 0.000000] Memory: 1468232K/1769472K available (10240K kernel code, 753K rwdata, 2236K rodata, 6144K init, 557K bss, 39096K reserved, 262144K cma-reserved, 1048576K highmem)

    [ 0.000000] Virtual kernel memory layout:

    [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)

    [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)

    [ 0.000000] vmalloc : 0xec800000 - 0xff800000 ( 304 MB)

    [ 0.000000] lowmem : 0xc0000000 - 0xec000000 ( 704 MB)

    [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

    [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

    [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB)

    [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (6144 kB)

    [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 754 kB)

    [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 558 kB)

    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

    [ 0.000000] ftrace: allocating 32504 entries in 96 pages

    [ 0.000000] rcu: Hierarchical RCU implementation.

    [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16

    [ 0.000000] GIC: Using split EOI/Deactivate mode

    [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).

    [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns

    [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns

    [ 0.000017] Switching to timer-based delay loop, resolution 18ns

    [ 0.000267] Console: colour dummy device 80x30

    [ 0.000301] console [tty0] enabled

    [ 0.000351] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.50 BogoMIPS (lpj=180000)

    [ 0.000380] pid_max: default: 32768 minimum: 301

    [ 0.000571] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

    [ 0.000594] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

    [ 0.001361] CPU: Testing write buffer coherency: ok

    [ 0.001881] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

    [ 0.002695] Setting up static identity map for 0x200000 - 0x20003c

    [ 0.002897] rcu: Hierarchical SRCU implementation.

    [ 0.005518] smp: Bringing up secondary CPUs ...

    [ 0.006588] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

    [ 0.007795] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

    [ 0.008942] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

    [ 0.009110] smp: Brought up 1 node, 4 CPUs

    [ 0.009126] SMP: Total of 4 processors activated (432.00 BogoMIPS).

    [ 0.009139] CPU: All CPU(s) started in HYP mode.

    [ 0.009151] CPU: Virtualization extensions available.

    [ 0.009911] devtmpfs: initialized

    [ 0.020925] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0

    [ 0.021161] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

    [ 0.021188] futex hash table entries: 1024 (order: 4, 65536 bytes)

    [ 0.027929] pinctrl core: initialized pinctrl subsystem

    [ 0.028932] NET: Registered protocol family 16

    [ 0.032895] DMA: preallocated 1024 KiB pool for atomic coherent allocations

    [ 0.033929] cpuidle: using governor ladder

    [ 0.033978] cpuidle: using governor menu

    [ 0.034468] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

    [ 0.034482] hw-breakpoint: maximum watchpoint size is 8 bytes.

    [ 0.034715] Serial: AMBA PL011 UART driver

    [ 0.039310] bcm2835-mbox fe00b880.mailbox: mailbox enabled

    [ 0.082189] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1

    [ 0.085395] vgaarb: loaded

    [ 0.085749] SCSI subsystem initialized

    [ 0.085960] usbcore: registered new interface driver usbfs

    [ 0.086015] usbcore: registered new interface driver hub

    [ 0.086098] usbcore: registered new device driver usb

    [ 0.091417] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-11-05 20:38, variant start_x

    [ 0.093701] raspberrypi-firmware soc:firmware: Firmware hash is 9b5b17690196152a1df1beb1429dd906556d5829

    [ 0.097493] Advanced Linux Sound Architecture Driver Initialized.

    [ 0.098528] clocksource: Switched to clocksource arch_sys_counter

    [ 0.186163] FS-Cache: Loaded

    [ 0.196573] NET: Registered protocol family 2

    [ 0.197167] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)

    [ 0.197198] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

    [ 0.197259] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

    [ 0.197326] TCP: Hash tables configured (established 8192 bind 8192)

    [ 0.197465] UDP hash table entries: 512 (order: 2, 16384 bytes)

    [ 0.197498] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

    [ 0.197731] NET: Registered protocol family 1

    [ 0.198395] RPC: Registered named UNIX socket transport module.

    [ 0.198409] RPC: Registered udp transport module.

    [ 0.198421] RPC: Registered tcp transport module.

    [ 0.198434] RPC: Registered tcp NFSv4.1 backchannel transport module.

    [ 0.198454] PCI: CLS 0 bytes, default 64

    [ 0.224022] Initialise system trusted keyrings

    [ 0.224250] workingset: timestamp_bits=14 max_order=19 bucket_order=5

    [ 0.233410] squashfs: version 4.0 (2009/01/31) Phillip Lougher

    [ 0.234149] FS-Cache: Netfs 'nfs' registered for caching

    [ 0.234787] NFS: Registering the id_resolver key type

    [ 0.234851] Key type id_resolver registered

    [ 0.234864] Key type id_legacy registered

    [ 0.234888] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

    [ 0.235422] FS-Cache: Netfs 'cifs' registered for caching

    [ 0.242543] Key type asymmetric registered

    [ 0.242558] Asymmetric key parser 'x509' registered

    [ 0.242751] bounce: pool size: 64 pages

    [ 0.242796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)

    [ 0.242812] io scheduler noop registered (default)

    [ 0.242825] io scheduler deadline registered

    [ 0.242983] io scheduler cfq registered

    [ 0.242998] io scheduler mq-deadline registered

    [ 0.243012] io scheduler kyber registered

    [ 0.243146] io scheduler bfq registered

    [ 0.247500] brcm-pcie fd500000.pcie: could not get clock

    [ 0.247589] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:

    [ 0.247643] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000

    [ 0.295246] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)

    [ 0.295503] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00

    [ 0.295521] pci_bus 0000:00: root bus resource [bus 00-01]

    [ 0.295541] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])

    [ 0.295601] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400

    [ 0.295830] pci 0000:00:00.0: PME# supported from D0 D3hot

    [ 0.298655] PCI: bus0: Fast back to back transfers disabled

    [ 0.298679] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring

    [ 0.298889] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330

    [ 0.298976] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]

    [ 0.299226] pci 0000:01:00.0: PME# supported from D0 D3cold

    [ 0.301927] PCI: bus1: Fast back to back transfers disabled

    [ 0.301946] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01

    [ 0.302009] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]

    [ 0.302031] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]

    [ 0.302073] pci 0000:00:00.0: PCI bridge to [bus 01]

    [ 0.302098] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]

    [ 0.302357] pcieport 0000:00:00.0: enabling device (0140 -> 0142)

    [ 0.302579] pcieport 0000:00:00.0: Signaling PME with IRQ 53

    [ 0.302785] pcieport 0000:00:00.0: AER enabled with IRQ 53

    [ 0.302979] pci 0000:01:00.0: enabling device (0140 -> 0142)

    [ 0.307391] iproc-rng200 fe104000.rng: hwrng registered

    [ 0.307681] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)

    [ 0.308310] vc-sm: Videocore shared memory driver

    [ 0.314796] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops 0xc0c5f388)

    [ 0.315441] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0

    [ 0.315457] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

    [ 0.315469] [drm] No driver support for vblank timestamp query.

    [ 0.315481] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL

    [ 0.482273] Console: switching to colour frame buffer device 240x67

    [ 0.515588] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device

    [ 0.528052] brd: module loaded

    [ 0.528199] loop: module loaded

    [ 0.550267] usbcore: registered new interface driver rtsx_usb

    [ 0.551379] Loading iSCSI transport class v2.0-870.

    [ 0.551814] iscsi: registered transport (tcp)

    [ 0.553520] libphy: Fixed MDIO Bus: probed

    [ 0.553559] tun: Universal TUN/TAP device driver, 1.6

    [ 0.554358] bcmgenet fd580000.genet: failed to get enet clock

    [ 0.554378] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000

    [ 0.554401] bcmgenet fd580000.genet: failed to get enet-wol clock

    [ 0.554422] bcmgenet fd580000.genet: failed to get enet-eee clock

    [ 0.554450] bcmgenet: Skipping UMAC reset

    [ 0.554839] unimac-mdio unimac-mdio.-19: DMA mask not set

    [ 0.565249] libphy: bcmgenet MII bus: probed

    [ 0.592880] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)

    [ 0.593850] usbcore: registered new interface driver lan78xx

    [ 0.593900] usbcore: registered new interface driver dm9601

    [ 0.593957] usbcore: registered new interface driver smsc95xx

    [ 0.594273] xhci_hcd 0000:01:00.0: xHCI Host Controller

    [ 0.594307] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1

    [ 0.596957] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890

    [ 0.597158] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 54

    [ 0.597905] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

    [ 0.597924] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

    [ 0.597940] usb usb1: Product: xHCI Host Controller

    [ 0.597955] usb usb1: Manufacturer: Linux 4.19.83 xhci-hcd

    [ 0.597970] usb usb1: SerialNumber: 0000:01:00.0

    [ 0.598596] hub 1-0:1.0: USB hub found

    [ 0.598662] hub 1-0:1.0: 1 port detected

    [ 0.599157] xhci_hcd 0000:01:00.0: xHCI Host Controller

    [ 0.599184] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2

    [ 0.599208] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed

    [ 0.599661] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19

    [ 0.599677] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

    [ 0.599692] usb usb2: Product: xHCI Host Controller

    [ 0.599707] usb usb2: Manufacturer: Linux 4.19.83 xhci-hcd

    [ 0.599721] usb usb2: SerialNumber: 0000:01:00.0

    [ 0.600312] hub 2-0:1.0: USB hub found

    [ 0.600387] hub 2-0:1.0: 4 ports detected

    [ 0.601744] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

    [ 0.602068] dwc_otg: FIQ enabled

    [ 0.602081] dwc_otg: NAK holdoff enabled

    [ 0.602093] dwc_otg: FIQ split-transaction FSM enabled

    [ 0.602109] Module dwc_common_port init

    [ 0.602356] usbcore: registered new interface driver uas

    [ 0.602466] usbcore: registered new interface driver usb-storage

    [ 0.602668] mousedev: PS/2 mouse device common for all mice

    [ 0.603053] i2c /dev entries driver

    [ 0.605710] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer

    [ 0.605980] bcm2835-cpufreq: min=600000 max=1500000

    [ 0.606852] sdhci: Secure Digital Host Controller Interface driver

    [ 0.606865] sdhci: Copyright(c) Pierre Ossman

    [ 0.607395] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe

    [ 0.607946] sdhci-pltfm: SDHCI platform and OF driver helper

    [ 0.611525] ledtrig-cpu: registered to indicate activity on CPUs

    [ 0.611596] hidraw: raw HID events driver (C) Jiri Kosina

    [ 0.612802] usbcore: registered new interface driver usbhid

    [ 0.612807] usbhid: USB HID core driver

    [ 0.613252] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0

    [ 0.614320] [vc_sm_connected_init]: start

    [ 0.620631] [vc_sm_connected_init]: end - returning 0

    [ 0.621345] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

    [ 0.621366] [vc_sm_connected_init]: start

    [ 0.621764] [vc_sm_connected_init]: installed successfully

    [ 0.623763] NET: Registered protocol family 10

    [ 0.625044] Segment Routing with IPv6

    [ 0.625125] NET: Registered protocol family 17

    [ 0.625282] Key type dns_resolver registered

    [ 0.625571] Registering SWP/SWPB emulation handler

    [ 0.626192] Loading compiled-in X.509 certificates

    [ 0.635240] uart-pl011 fe201000.serial: cts_event_workaround enabled

    [ 0.635318] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2

    [ 0.639053] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver

    [ 0.639389] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver

    [ 0.639792] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0

    [ 0.639799] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated

    [ 0.666143] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1

    [ 0.685029] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

    [ 0.686710] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

    [ 0.688382] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

    [ 0.691487] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

    [ 0.693160] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

    [ 0.701358] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA

    [ 0.710327] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1

    [ 0.711670] console [netcon0] enabled

    [ 0.711675] netconsole: network logging started

    [ 0.711681] of_cfs_init

    [ 0.711702] of_cfs_init: OK

    [ 0.711878] ALSA device list:

    [ 0.711883] No soundcards found.

    [ 0.718773] Freeing unused kernel memory: 6144K

    [ 0.718895] Run /init as init process

    [ 0.734371] random: fast init done

    [ 0.761221] mmc0: new high speed SDHC card at address aaaa

    [ 0.761713] mmc1: new high speed SDIO card at address 0001

    [ 0.763394] mmcblk0: mmc0:aaaa SU16G 14.8 GiB

    [ 0.764996] mmcblk0: p1 p2

    [ 0.796944] Checking disk(s): UUID=2311-4421 UUID=4a7717ae-4e4f-431a-86cf-643c8bb8834a

    [ 0.928547] usb 1-1: new high-speed USB device number 2 using xhci_hcd

    [ 1.069721] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20

    [ 1.069729] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0

    [ 1.069735] usb 1-1: Product: USB2.0 Hub

    [ 1.070873] hub 1-1:1.0: USB hub found

    [ 1.071187] hub 1-1:1.0: 4 ports detected

    [ 1.192123] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd

    [ 1.209633] usb 2-2: New USB device found, idVendor=1058, idProduct=25a2, bcdDevice=10.14

    [ 1.209640] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

    [ 1.209646] usb 2-2: Product: Elements 25A2

    [ 1.209652] usb 2-2: Manufacturer: Western Digital

    [ 1.209658] usb 2-2: SerialNumber: 575832314136364C37583945

    [ 1.211766] usb-storage 2-2:1.0: USB Mass Storage device detected

    [ 1.212048] scsi host0: usb-storage 2-2:1.0

    [ 1.355208] usb 1-1.3: new low-speed USB device number 3 using xhci_hcd

    [ 1.364161] fsck: CP437: Invalid argument

    [ 1.364161] fsck: fsck.fat 3.0.28 (2015-05-16)

    [ 1.364161] fsck: /dev/mmcblk0p1: 210 files, 18467/65501 clusters

    [ 1.364161] fsck: STORAGE: recovering journal

    [ 1.364161] fsck: STORAGE: clean, 5926/3758080 files, 721297/15029760 blocks

    [ 1.465374] usb 1-1.3: New USB device found, idVendor=1a2c, idProduct=0027, bcdDevice= 1.10

    [ 1.465384] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

    [ 1.465391] usb 1-1.3: Product: USB Keykoard

    [ 1.465397] usb 1-1.3: Manufacturer: USB

    [ 1.472001] input: USB USB Keykoard as /devices/platform/scb/http://fd500000.pcie/pci0000:00/000…01/input/input0

    [ 1.528919] hid-generic 0003:1A2C:0027.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:01:00.0-1.3/input0

    [ 1.533545] input: USB USB Keykoard Consumer Control as /devices/platform/scb/http://fd500000.pcie/pci0000:00/000…02/input/input1

    [ 1.588702] input: USB USB Keykoard System Control as /devices/platform/scb/http://fd500000.pcie/pci0000:00/000…02/input/input2

    [ 1.588850] hid-generic 0003:1A2C:0027.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:01:00.0-1.3/input1

    [ 1.677682] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

    [ 2.105754] systemd[1]: System time before build time, advancing clock.

    [ 2.112355] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)

    [ 2.112672] systemd[1]: Detected architecture arm.

    [ 2.115884] systemd[1]: Set hostname to <LibreELEC>.

    [ 2.119329] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument

    [ 2.226933] random: systemd: uninitialized urandom read (16 bytes read)

    [ 2.230798] systemd[1]: Starting Show Version...

    [ 2.231026] random: systemd: uninitialized urandom read (16 bytes read)

    [ 2.231503] systemd[1]: Listening on udev Control Socket.

    [ 2.231655] random: systemd: uninitialized urandom read (16 bytes read)

    [ 2.232149] systemd[1]: Listening on Journal Socket.

    [ 2.234572] systemd[1]: Mounting Kernel Debug File System...

    [ 2.237084] systemd[1]: Starting Create Persistent Log Directory on /storage...

    [ 2.237485] systemd[1]: Condition check resulted in Huge Pages File System being skipped.

    [ 2.239025] scsi 0:0:0:0: Direct-Access WD Elements 25A2 1014 PQ: 0 ANSI: 6

    [ 2.241309] sd 0:0:0:0: [sda] Spinning up disk...

    [ 2.377281] kernel-overlays-setup: setup base modules

    [ 2.427560] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.83

    [ 2.459779] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware

    [ 2.459906] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays

    [ 2.461084] kernel-overlays-setup: done

    [ 2.662615] systemd-journald[213]: Received request to flush runtime journal from PID 1

    [ 3.217385] random: crng init done

    [ 3.217395] random: 7 urandom warning(s) missed due to ratelimiting

    [ 3.251865] .

    [ 3.724306] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff

    [ 3.724625] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff

    [ 3.724871] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff

    [ 3.725101] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff

    [ 3.728691] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000

    [ 3.729296] media: Linux media interface: v0.10

    [ 3.912146] videodev: Linux video capture interface: v2.00

    [ 4.108050] cfg80211: Loading compiled-in X.509 certificates for regulatory database

    [ 4.114884] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

    [ 4.237789] brcmfmac: F1 signature read @0x18000000=0x15264345

    [ 4.256162] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6

    [ 4.256452] usbcore: registered new interface driver brcmfmac

    [ 4.265748] .

    [ 4.349408] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.

    [ 4.356813] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.

    [ 4.360280] bcm2835-codec bcm2835-codec: Device registered as /dev/video10

    [ 4.360301] bcm2835-codec bcm2835-codec: Loaded V4L2 decode

    [ 4.362268] bcm2835-codec bcm2835-codec: Device registered as /dev/video11

    [ 4.362284] bcm2835-codec bcm2835-codec: Loaded V4L2 encode

    [ 4.364332] bcm2835-codec bcm2835-codec: Device registered as /dev/video12

    [ 4.364347] bcm2835-codec bcm2835-codec: Loaded V4L2 isp

    [ 4.669610] bcmgenet: Skipping UMAC reset

    [ 4.738895] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)

    [ 4.739234] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

    [ 4.780613] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6

    [ 4.794008] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04

    [ 4.855601] uart-pl011 fe201000.serial: no DMA platform data

    [ 4.900163] input: lircd-uinput as /devices/virtual/input/input3

    [ 4.945461] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

    [ 4.945477] brcmfmac: power management disabled

    [ 5.049723] input: eventlircd as /devices/virtual/input/input4

    [ 5.278529] .

    [ 5.758656] bcmgenet fd580000.genet eth0: Link is Down

    [ 6.295189] ..ready

    [ 7.305530] sd 0:0:0:0: [sda] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)

    [ 7.306042] sd 0:0:0:0: [sda] Write Protect is off

    [ 7.306049] sd 0:0:0:0: [sda] Mode Sense: 47 00 10 08

    [ 7.306565] sd 0:0:0:0: [sda] No Caching mode page found

    [ 7.306572] sd 0:0:0:0: [sda] Assuming drive cache: write through

    [ 7.355240] sda: sda1

    [ 7.360701] sd 0:0:0:0: [sda] Attached SCSI disk

    [ 7.768739] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

    [ 7.843927] fuse init (API version 7.27)

    [ 9.012198] Under-voltage detected! (0x00050005)

    [ 11.474438] Bluetooth: Core ver 2.22

    [ 11.474513] NET: Registered protocol family 31

    [ 11.474519] Bluetooth: HCI device and connection manager initialized

    [ 11.474533] Bluetooth: HCI socket layer initialized

    [ 11.474542] Bluetooth: L2CAP socket layer initialized

    [ 11.474567] Bluetooth: SCO socket layer initialized

    [ 11.480613] Bluetooth: HCI UART driver ver 2.3

    [ 11.480622] Bluetooth: HCI UART protocol H4 registered

    [ 11.480684] Bluetooth: HCI UART protocol Three-wire (H5) registered

    [ 11.480837] Bluetooth: HCI UART protocol Broadcom registered

    [ 15.411914] Voltage normalised (0x00000000)

    [ 17.545326] Under-voltage detected! (0x00050005)

    [ 20.855358] vchiq: 0: ignoring ERROR from callback to service 9008

    [ 23.945231] Voltage normalised (0x00000000)

    HDDREC2020:~ # ps | grep /usr/sbin/lircd

    481 root 0:00 /usr/sbin/lircd --nodaemon /storage/.config/lircd.conf

    482 root 0:00 /usr/sbin/lircd-uinput --add-release-events

    956 root 0:00 grep /usr/sbin/lircd

    HDDREC2020:~ # ir-keytable -r

    /sys/class/rc/: No such file or directory

    No devices found

    HDDREC2020:~ # ir-keytable -t

    /sys/class/rc/: No such file or directory

    No devices found

    HDDREC2020:~ #