Posts by envagyok

I had a nand install of libreelec 008 on my minimx.
I decide to try an android build, so i install it with amlogic burning tool.
I need try it 10-12 times, always say error, or at 10-11%, or 97%, but at the end was success.
Then i want install back the latest 008 libreelec to nand again, but i cannot.
I tried many times, always this message come:

What is the problem?
I make install as described.
Save zip to sdcard with ledtb.

Another thing.
I make backup before this from nand version.
But i cannot restore to sdcard build.
Maybe not compatible the sdcard and the nand backup?
(maybe the filesystem pointers others?)

The original kszaq's 008 dtb
and
new file provided by kszaq

Quote from kszaq

envagyok A device tree with that fix to test for you: gxbb_p200_1G_envagyok_test.dtb

Would be nice if you could post iperf results before/after.

Hi,

I tried.
First time was the MiniMX very bad playce, with slow wifi
Then with the new dtb makes 4.19-5.13 Mbit, and with the old 3.19-4.35, but im not 100%, because the speed always changed. And later speeded up both.
When good places were the MiniMX (only 1 wall, and 2m) , then both dtb file resulted 40-45 mbit.
I compared the files later, the 2 dtb file is identical
So i testing 2 hours long the 2 identical dtb file

Quote from kszaq

@enavgyok Have you compared WiFi speed in Android after the fix you mentioned and in LE?

No, because I have and installed le.
but Russian forum 4pda I read (with translator) positive results.
index.php?showtopic=703938
[hr]
index.php?showtopic=703938&st=1380#entry52263749

In libreelec 7.0.2 is it already embedded, and enabled?

On MiniMX 1/8 at android wifi speed is very slow.
Someone make a fix to repair it on Android.
Dropbox - Link not found

I noticed at LE is the wifi speed bad enough too.
Possible with this fix file repair the LE build too?
This fix is maked to 2/16 box too.

Quote from Gaudi

[emoji106] Thanks for your restless support!

+1

Possible to implement V4L dvb drivers to next wetek play release, or put in the 7.0.2?

On other amlogic devices (with kszaq's libreelec build) already have this patch merged to build, and work flawlessly with many new dvb tuner, what is not supported with outdated amlogic kernel.
(Main_Page)
How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers#Retrieving_and_Building.2FCompiling_the_Latest_V4L-DVB_Source_Code

Or how can I self patch? I'm noob in this thread.
Thanks!

I tested with latest 004 my k1plus
The tuner little less sensitivity has, but working both tuner.
I use tvheadend wizard, that find all dvb-s channel, the turn off dvb-s tuner, search dvb-t (generic-auto).
Find all local, but from neighbour country not, so there is sensitivity problem. (other tuners and k1plus with android find it.
Sometimes problem to switch channel (no signal),but later work.
Vdr working good, find more channel, but I don't know enable livetv, then always disable vdr addon, and ask me enable pvr addon. I Enable again, but not work, try restart, then ask again, and vdr plugin disabled.

Quote from segment

Tvheadend 4.2 7.0.105 is still the same problems.
screen:

fail tp

You can try this:
LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.003.img.gz
This is alex's latest K1Plus build.
So some thing not work, for example multichannel pcm out..
Please report back.

Quote from francescosoft

Wich version of TVHeadend are you guys using. 4.0 or 4.2 Wich one is better ?

4.2
Still beta, but more better and stable as 4.0

"Running MySQL on the Wetek may have a big impact on the SDcard or NAND memory in terms of lifetime expectancy...."
Really?
Why?
Is it difference between on wetek play nand/sd own kodi database vs SQL viewed file I/o counting numbers?
I think it is near equal.

For the device settings need: 0
And a working pcscd-ből addon exactly for hardware.

Quote from kszaq

The delay is caused by u-boot initializing SD card, USB drives etc. You can only make your device boot a bit faster if you boot from internal memory and "disable" booting from SD/USB. You can do this after installing LE to internal memory and executing fw_setenv bootcmd 'run storeboot'

Or maybe switch the bootscreen to other is better but not faster solution:)

Quote from Klojum

Get a OLED TV screen first, if you want to check black color screen values... /me runs

I don't have oled yet but have 2014 plasma and 2015 led.
I think it is signal processing feature not display.
You see the 3 black box, and the shadow at Thx?
You're direct connect the player to TV or through avr?
And what settings use at TV?

I read this article:
hdmi-black-levels-xvycc-rgb

Download thx optimizer iso, and try to set up my tv.
Everything is fine, but i dont see blacker than black signal (the shadow of thx logo, and other two dark block)
Maybe amlogic hardware decoder cut it?
How can it enable for proper televison settings?

Home - THX

Quote from garyang

I also add 4K 60FPS HEVC file which has same problem.
Can you try below?
1. Open and Play any 4K 60FPS HEVC file.
2. Push home button on your remote.
3. Extract Full Screen.
4. Check syncing problem.

The ts file played perfectly. When just watch.
Only when I go to home screen, then is noticeable out of sync.
But why need to go home menu?

Quote from wkchick

kszaq, here is the link to download the episode that ukmark62 reported with audio out of sync issue:
MEGA

File size is only 356MB. As I said in my earlier post, it's not a matter of very high video bitrate like 4K VP9. It's only 720p HEVC, not even 10bit. If you watch it, you'll find audio out of sync within the first 30 minutes and getting worse throughout the episode.

Yes, I tested many video contents, even with a higher bitrate e.g. 1080p 10bit HEVC and there is no audio out of sync problem. I noticed it only starts everytime when there is complete black scene transitions in that episode. Sync problem doesn't exists in .007 build. I didn't check development builds though.

Thanks for your hard work and your attitude towards fixing the patch instead of deleting it is much appreciated.

This file has video stream:
23.976 fps
audio stream:
23.438 fps
I noticed with tool mediainfo, at windows.
So, maybe it is the root of the problem.
You tried play with other device, for example with PC?
This file perfectly played with toher version of libreelec?