Thanks afl1 for the latest update.
All is working well. No black/freeze screen for TV channel anymore.
DereC
For usb port non-working, maybe you didn't replace new dtb.img when updating? All usb ports work ok with my Kii pro.
Thanks afl1 for the latest update.
All is working well. No black/freeze screen for TV channel anymore.
DereC
For usb port non-working, maybe you didn't replace new dtb.img when updating? All usb ports work ok with my Kii pro.
I'm having trouble with this situation as well.
My workaround is to use Kodi Callback addon to automatically open some windows (in my case I set to open TV channel) when playback is stopped.
However, with LibreELEC updated (both with 7.95.2 and 7.95.3), now I can't make playback to stop again when TV turns off (already set hdmi cec to stop playbacks when TV off).
Is there any solution to this?
You are probably blind!
Go to first post in this thread.
But me neither. Only see beta5 on the first post. No beta5b yet.
Edited: Now I can see beta5b. Thanks.
BTW. Thanks for your new build with media_build support. Now I can use MyGica T230(c) with Kii Pro. I now have 3 dvb-t2 tuner working together (one internal plus 2 external).
Go to the "service" in LibreELEC setting, then at the bottom of it, you have to enable bluetooth there.
I think your dvb usb is already included with the build. But why don't you just try it yourself?
Me too. Still on 108 version.
It works fine here: journalctl -u service.transmission shows switching to turtle mode as scheduled.
Check timezone with command date.
Check Transmission settings in /storage/.kodi/userdata/addon_data/service.transmission/settings.json
With command "date" it seems that my system (x86 LibreELEC) does not have time syncing with Kodi time.
I set "wait for network before start" in LibreELEC setting but still can't make system's date to sync with the time in Kodi.
For now, I just change "scheduled times" in Transmission to correspond with timezone from "date" command.
Thanks.
I see. Thanks for the info.
I just noticed that Transmission addon seems to not recognize my time zone that was set in Kodi gui setting.
I always set alternative speed limits and scheduled times between 5.00 - 23.00 but it seems not working corresponding to my Kodi time.
Is it normal that Plex docker delays to start almost 10 minute every time LibreELEC reboots?
I have to wait almost 10 mins before I can access Plex media library. In contrast to Portainer docker that starts immediately on boot with LibreELEC.
Edited: just try to reboot again and now Plex can start immediately. That's weird.
Yes, this command resets u-boot env variables to default values. If you wish to be able to boot from SD card or USB again, you have to use toothpick first (only once).
Just curious, what if my device doesn't have toothpick option available? Is there ssh command to revert back to SD card booting?
And will this disabled-SD card-booting speed up boot process from NAND significantly?
How to update Emby server?
I see on Emby dashboard that
Version 3.0.8500.0
A new version of Emby Server is available!
Version 3.1.5 is now available for download.
Can I update it manually or it will only get updated with LibreELEC addons?
Thanks for this addon. It's very convenient for sharing media library for my family.
Thanks for the update 7.90.beta4a.
Although someone reports that even with TEMP sensor enabled version the box that used to freeze will not getting freeze anymore.
But on my MK808b Pro it get freeze/struck at boot the first time after successfully updated to 7.90.beta4a (TEMP enabled).
I then reinstalled with 7.90.beta4a TEMP disabled version and now it's all good, even better actually.
I feel Wifi seems to improve (my network Emby library loads faster a little bit.)
And no freeze/struck detected at all with almost 10 times reboot.
Docker works fine on my amlogic S905 box and intel mini pc. Thanks for wonderful works.
I'm using mainly as Plex server.
But when I tried using PlexKodiConnect with amlogic S905 box, which also serve as Plex media server too, it can load all videos from Plex but just can't play. I don't know if this is a bug using both client and docker server on the same machine, or maybe just my error configuration. But I can play PlexKodiConnect on other Kodi box with no issue.
Anyway, not really a big deal for me. Because I'm not using that docker server box to play video much.
Hi all,I feel dumb.
I failed booting my mk808b pro using LE from SD.
Neither toothpick, nor boot recovery method works for me
I used the LibreELEC.USB-SD.Creator.Linux-64bit to make the SD card.freD
I have this stick too.
I can install with this method:
recovery method (3rd variant): if your box is rooted, use terminal emulator app and execute
command
I've installed TVheadend, Plex and Portainer dockers.
All is working well and all these are from LinuxServer.io add-ons.
Hi, kszaq
Thanks for this fix: "fixed "Cannot get MTD information for /dev/nand_env" error when setting/reading uenv variables"
Now I can install into NAND of MK808b pro.
And also for docker, it's working great.
Just installed some dockers from LinuxServer.io's Docker add-ons. Now I can have Plex server runs on Amlogic S905 device.
This is awesome !!!
Maybe it's the updated TVheadend addon that cause this. I reinstall the previous version and my TV service is back to normal.
Ps. I use t230 with amlogic s905 box.