Posts by roel

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel November 22, 2017 at 12:14 PM

You can see which error it is when ssh'ing into the box an run following command: systemctl status systemd-modules-load.service

On my box this is the result:

-> systemd-module-load.service:

Sep 29 10:17:51 LibreELEC systemd[1]: Starting Load Kernel Modules...

Sep 29 10:17:51 LibreELEC systemd-modules-load[2196]: Failed to find module 'aml

videodri'

Sep 29 10:17:51 LibreELEC systemd[1]: systemd-modules-load.service: Main process

exited, code=exited, status=1/FAILURE

Sep 29 10:17:51 LibreELEC systemd[1]: Failed to start Load Kernel Modules.

Sep 29 10:17:51 LibreELEC systemd[1]: systemd-modules-load.service: Unit entered

failed state.

Sep 29 10:17:51 LibreELEC systemd[1]: systemd-modules-load.service: Failed with

result 'exit-code'.

and

->kodi-aml-hdmimonitor.service:

Sep 30 11:34:59 LibreELEC systemd[1]: Started Kodi Amlogic HDMI connection monit

or.

Sep 30 11:34:59 LibreELEC systemd[1]: kodi-aml-hdmimonitor.service: Main process

exited, code=exited, status=1/FAILURE

Sep 30 11:34:59 LibreELEC systemd[1]: kodi-aml-hdmimonitor.service: Unit entered

failed state.

Sep 30 11:34:59 LibreELEC systemd[1]: kodi-aml-hdmimonitor.service: Failed with

result 'exit-code'.

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel September 30, 2017 at 11:01 AM

balbes150

2 systemd error messages:

-> systemd-module-load.service:

Sep 29 10:17:51 LibreELEC systemd[1]: Starting Load Kernel Modules...

Sep 29 10:17:51 LibreELEC systemd-modules-load[2196]: Failed to find module 'aml

videodri'

Sep 29 10:17:51 LibreELEC systemd[1]: systemd-modules-load.service: Main process

exited, code=exited, status=1/FAILURE

Sep 29 10:17:51 LibreELEC systemd[1]: Failed to start Load Kernel Modules.

Sep 29 10:17:51 LibreELEC systemd[1]: systemd-modules-load.service: Unit entered

failed state.

Sep 29 10:17:51 LibreELEC systemd[1]: systemd-modules-load.service: Failed with

result 'exit-code'.

and

->kodi-aml-hdmimonitor.service:

Sep 30 11:34:59 LibreELEC systemd[1]: Started Kodi Amlogic HDMI connection monit

or.

Sep 30 11:34:59 LibreELEC systemd[1]: kodi-aml-hdmimonitor.service: Main process

exited, code=exited, status=1/FAILURE

Sep 30 11:34:59 LibreELEC systemd[1]: kodi-aml-hdmimonitor.service: Unit entered

failed state.

Sep 30 11:34:59 LibreELEC systemd[1]: kodi-aml-hdmimonitor.service: Failed with

result 'exit-code'.

roel · S802/S812-Libreelec images for 7/8/9 roel September 20, 2017 at 10:50 AM

Quote from kodiuser1

My issue is that I can power the box off from the remote but not back on. The only way I can power back on is by pulling the power cord from the back of the the box and reinserting to reset the box. I can then press the power button on the box to power it back on.

Same problem here, I have to pull out the power and back in before it starts. Didn't had this problem before.

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel September 19, 2017 at 5:51 AM

Quote from roel

balbes150

Nice work. I only have a small problem since I updated to krypton. I have a dvd/hdd combo like this one -> USB Portable DVD/CD Writer and HDD All-In-One Combo

But when there is a cd in the tray, the hdd doesn't mount anymore. Strange as it wasn't a problem on Jarvis. I got to investigate it further, maybe it's a hardware problem that occured on the same time I upgraded to Krypton.

As I had to much issues with the 30/08 build, I tried the latest build of Demetris (just burn it to sd and added Balbes S805_autoscript). Boots fine and everything works, even my dvd/hdd combo. So something should probably be wrong in Balbes150 image.

Regarding the cpu, in Demetris image I have also constantely 1 cpu at 100%.

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel September 17, 2017 at 8:29 PM

Jeffers,

you can download Boot.src on his github page: LibreELEC.tv/projects/S812/install at Amlogic-Krypton · 150balbes/LibreELEC.tv · GitHub

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel September 16, 2017 at 6:28 PM

Then you did everything OK. Use your usb-stick with libreelec now to boot from. Just put it in the usb port and start your box normally (no reset button or toothpick necessary).

roel · s905 and s912 Leia builds roel September 16, 2017 at 10:56 AM

Works on the k-vim.

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel September 9, 2017 at 10:26 AM

balbes150

I installed your latest 20170830 build on my M8S. Everything works as expected, but I noticed the UI was so much more responsive. I thought it had something to do with changes in the kernel, but yesterday I noticed cpu2 is constantly on 100%. So probably a bug?

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel July 10, 2017 at 8:12 AM

Quote from luX0r.reload

Now I'm in fear when upgrading cause lost all my customizations and configuration.

Any solution for backup and restore entire sd card after a broken upgrade?

I installed TWRP on my M8S. Probably it's available for MXIII also. Search on freaktab. With TWRP you can take a backup. If the libreelec update fails, you can put the backup back with TWRP.

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel July 5, 2017 at 9:30 PM

balbes150

Nice work. I only have a small problem since I updated to krypton. I have a dvd/hdd combo like this one -> USB Portable DVD/CD Writer and HDD All-In-One Combo

But when there is a cd in the tray, the hdd doesn't mount anymore. Strange as it wasn't a problem on Jarvis. I got to investigate it further, maybe it's a hardware problem that occured on the same time I upgraded to Krypton.

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel June 30, 2017 at 4:15 PM

Indeed on the 2 latest builds (also MXIII-plus) the libreelec splash screen is gone. I get a "no signal" message on the screen. But libreelec works. Wait a little bit and suddenly the kodi screen appears. I had the same issue yesterday and downgraded again to the 14/06 build.

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel June 25, 2017 at 7:37 PM

Yeah, these M8S devices are funny things. On mine the LibreElec-S812.M8S version does work but no lan and no wifi. The lan.100 version gets stuck on boot. The lan.1000 version did work, with lan and wifi, but now I have the corrupted filesystem error. So I tried the MXIII_PLUS image and this one boots fine and everything works, theonly thing I had to do is add my remote.config to the LIBREELEC partition on the sd-card.

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel June 24, 2017 at 4:13 PM

nitnit

When you try to boot from usb, do you put your stick in the usb port closest to hdmi port? You are sure you used the toothpick method with balbes images and not the one from Demetris? Although it shouldn't be a problem, cause the image from Demetris searches for a kernel.img and the one from Balbes searches for a S805_autoscript. So Balbes images should work on a 'Demetris-system'.

I checked you picture. It isn't the same board, mine is labeled M9&M8_V1.0 2014/07/07, it's almost 3 years old, time fly.

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel June 24, 2017 at 9:03 AM

Quote from nitnit

Could you boot your ENY M8S box and install LE to an SDcard or USB stick ?

Can you give more details about the exact image you have used and the boot/install procedure ?

I booted from SD. It was the image LibreELEC-S812.MXIII_Plus.arm-17.3_20170614.img.gz

I burned the image to SD with etcher.

My m8s is multiboot enabled. So I just put in the sd-card and power on the device. Since the last lan1000 images I had the "filesystem corruption" error, but with the MXIII-plus image everything works fine. Didn't test it very well though, but remote, wifi and lan works OK.

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel June 21, 2017 at 7:28 AM

Quote from balbes150

Have you tried to use the image MXIII_Plus ?

Balbes tested yesterday your latest MXIII_Plus image on my ENY M8S and it works like a charm (never thought to try de MXIII-plus version). No corrupted filesystem message, LAN and WIFI works great and it's fast also. So for the moment, nothing to complain.

roel

Hello,

is it possible to configure pulseaudio to support network streaming without avahi/zeroconf? I want to stream the sound from pulseaudio to my widora neo (openwrt). As the pulseaudio package from openwrt doesn't support avahi/zeroconf I want to do it by editing default.pa. I tried to copy the default.pa to /storage/.config pulse-daemon.conf.d. Maybe it soes work like that, but i'm not able to select this sound output in settings->system->audio.

Maybe somebody already managed to do it?

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel June 9, 2017 at 9:43 PM

Quote from mark2

it will not boot from SD card says filesystem corruption has been detected

Same problem here with Balbes latest builds for LAN1000. Since the builds after 20170418 they don't boot anymore from SD-card. Even if you do a upgrade with a tar file you get the error mesage after the update. Very strange. I use a real samsung sd-card and it boot's the old images just fine.

roel · [S812] MIII Plus 2Gb\16Gb eMMC roel May 24, 2017 at 7:41 AM

balbes150

Is there something changed in the compilation of your versions since your 20170414 builds. Those I can write happily to sd-card and boot from is. With the newer versions 20170418 and 20170513 I get the corrupted file system error. I thought to be smart and update the 20170414 build wit the update tar of 20170513, but guess what ... when rebooting i got the corrupted file ssytem error again. Didn't try form usb, but as it worked with the older versions I wonder why not with the newer versions.