Posts by TeHashX

TeHashX · Can't enable cifs shares in v8.1.2 TeHashX October 6, 2017 at 12:19 PM

Quote from chewitt

"SMB2 will use too much resources" wins this months "most bogus comment" award .. aside from the fact that SMB2 is both more secure and gives better throughput performance, the comment is, just, wrong.

Thanks for the award

Samba server is running on a Asus RT-AC68U router and SMBv2 is disabled by default because of CPU and the IO subsystem Asuswrt-Merlin 376.48 Beta 2 is out | SmallNetBuilder Forums

Anyway, I enabled a nfs share and I get better performance than samba.

TeHashX · Can't enable cifs shares in v8.1.2 TeHashX September 29, 2017 at 10:35 AM

This was a very explicit answer

Samba server is running on my Asus RT-AC68U router and if I enable SMBv2 I think it will use to much resources.

Anyway, I will do some tests to check if SMBv2 is faster or just more secure.

Thanks!

TeHashX · Can't enable cifs shares in v8.1.2 TeHashX September 27, 2017 at 8:00 AM

Thanks, you are right, I get:

Code

root@ubuntu:/var/tmp# nmap -p139,445 --script smb-protocols.nse 192.168.5.1

Starting Nmap 7.60 ( https://nmap.org ) at 2017-09-27 09:43 EEST
Nmap scan report for RT-AC68U (192.168.5.1)
Host is up (0.0020s latency).

PORT    STATE SERVICE
139/tcp open  netbios-ssn
445/tcp open  microsoft-ds
MAC Address: 00:AA:AA:CC:CC:AA (Asustek Computer)

Host script results:
| smb-protocols:
|   dialects:
|_    NT LM 0.12 (SMBv1) [dangerous, but default]

Nmap done: 1 IP address (1 host up) scanned in 0.56 seconds

Display More

This mean in v8.1.1 C2 connected with SMBv1 protocol but in V8.1.2 samba was updated and not accept connections until protocol version is added to Options field?

TeHashX · Can't enable cifs shares in v8.1.2 TeHashX September 26, 2017 at 10:36 PM

I tried command from another server

Code

smbclient -L 192.168.5.1
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.6.25]

So, it's v3.6.25 but I can connect only if I add vers=1.0 to Options field, must be something else wrong in LE v8.1.2

TeHashX · Can't enable cifs shares in v8.1.2 TeHashX September 26, 2017 at 5:22 PM

Thanks, I added vers=1.0 and it's working, with 2.1 or 3.0 not working and I am almost sure samba server is 3.6, there is some command from le terminal to find exactly which version is samba server?

TeHashX · Can't enable cifs shares in v8.1.2 TeHashX September 26, 2017 at 12:22 PM

I updated Odroid C2 from v8.1.1 to v8.1.2 and can't mount anymore cifs shares (from kodi menu I can mount shares but not with systemctl)

I created /storage/.config/system.d/storage-Media.mount with:

Code

[Unit]
Description=cifs mount script
Requires=network-online.service
After=network-online.service
Before=kodi.service

[Mount]
What=//192.168.5.1/Media
Where=/storage/Media
Options=username=user,password=pass,rw
Type=cifs

[Install]
WantedBy=multi-user.target

Display More

When trying to mount I get

Code

systemctl start storage-Media.mount
Job for storage-Media.mount failed.
See "systemctl status storage-Media.mount" and "journalctl -xe" for details.
systemctl status storage-Media.mount
storage-Media.mount - cifs mount script
   Loaded: loaded (/storage/.config/system.d/storage-Media.mount; enabled; vendor preset: disabled)
   Active: failed (Result: exit-code) since Tue 2017-09-26 14:13:52 EEST; 37s ago
    Where: /storage/Media
     What: //192.168.5.1/Media
  Process: 795 ExecMount=/usr/bin/mount //192.168.5.1/Media /storage/Media -t cifs -o username=user,password=pass,rw (code=exited, status=255)

Sep 26 14:13:52 LibreELEC systemd[1]: Mounting cifs mount script...
Sep 26 14:13:52 LibreELEC systemd[1]: storage-Media.mount: Mount process exited, code=exited status=255
Sep 26 14:13:52 LibreELEC systemd[1]: Failed to mount cifs mount script.
Sep 26 14:13:52 LibreELEC systemd[1]: storage-Media.mount: Unit entered failed state.

journalctl -xe
● storage-Media.mount - cifs mount script
   Loaded: loaded (/storage/.config/system.d/storage-Media.mount; enabled; vendor preset: disabled)
   Active: failed (Result: exit-code) since Tue 2017-09-26 14:13:52 EEST; 37s ago
    Where: /storage/Media
     What: //192.168.5.1/Media
  Process: 795 ExecMount=/usr/bin/mount //192.168.5.1/Media /storage/Media -t cifs -o username=user,password=pass,rw (code=exited, status=255)

Sep 26 14:13:52 LibreELEC systemd[1]: Mounting cifs mount script...
● storage-Media.mount - cifs mount script
● storage-Media.mount - cifs mount script
   Loaded: loaded (/storage/.config/system.d/storage-Media.mount; enabled; vendor preset: disabled)
-- Logs begin at Tue 2017-09-26 14:10:02 EEST, end at Tue 2017-09-26 14:15:36 EEST. --
Sep 26 14:14:26 LibreELEC kernel: i2c i2c-1: token 1, master_no(1) 300K addr 0x51
● storage-Media.mount - cifs mount script
   Loaded: loaded (/storage/.config/system.d/storage-Media.mount; enabled; vendor preset: disabled)
   Active: failed (Result: exit-code) since Tue 2017-09-26 14:15:00 EEST; 53s ago
    Where: /storage/Media
     What: //192.168.5.1/Media
-- Logs begin at Tue 2017-09-26 14:11:12 EEST, end at Tue 2017-09-26 14:16:09 EEST. --
Sep 26 14:14:59 LibreELEC kernel: i2c i2c-1: token 1, master_no(1) 300K addr 0x51
Sep 26 14:14:59 LibreELEC kernel: i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
Sep 26 14:14:59 LibreELEC kernel: i2c i2c-1: token 1, master_no(1) 300K addr 0x51
Sep 26 14:14:59 LibreELEC kernel: i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
Sep 26 14:14:59 LibreELEC kernel: i2c i2c-1: token 1, master_no(1) 300K addr 0x51
Sep 26 14:14:59 LibreELEC kernel: rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
Sep 26 14:15:00 LibreELEC crond[292]: USER root pid 805 cmd /storage/.config/automount.sh
Sep 26 14:15:00 LibreELEC systemd[1]: storage-Media.mount: Directory /storage/Media to mount over is not empty, mounting anyway.
Sep 26 14:15:00 LibreELEC systemd[1]: Mounting cifs mount script...
Sep 26 14:15:00 LibreELEC systemd[1]: storage-Media.mount: Mount process exited, code=exited status=255
Sep 26 14:15:00 LibreELEC systemd[1]: Failed to mount cifs mount script.
Sep 26 14:15:00 LibreELEC systemd[1]: storage-Media.mount: Unit entered failed state.
Sep 26 14:15:00 LibreELEC crond[292]: Job for storage-Media.mount failed.
Sep 26 14:15:00 LibreELEC crond[292]: See "systemctl status storage-Media.mount" and "journalctl -xe" for details.
Sep 26 14:15:00 LibreELEC crond[292]: Cifs share not available on 26/09/2017 14:15:00
Sep 26 14:15:00 LibreELEC kernel: i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
Sep 26 14:15:00 LibreELEC kernel: i2c i2c-1: token 1, master_no(1) 300K addr 0x51
Sep 26 14:15:00 LibreELEC kernel: i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
Sep 26 14:15:00 LibreELEC kernel: i2c i2c-1: token 1, master_no(1) 300K addr 0x51

Display More

After downgrading to v8.1.1 it's working again

TeHashX · [8.2.3.1] LibreELEC 8.2 for S905/S905X TeHashX August 25, 2017 at 9:37 AM

Hi, clean v8.1.5 install on Odroid C2 and I only get 100Mb/s lan, with original v8.1.0 LE I get 1000Mb/s, should I enable it somewhere?

I know that because ethernet led is green ODROID • View topic - Gigabit Ethernet Problem

v8.1.0

Display Spoiler

LibreELEC:~ # ethtool -i eth0

driver: st_gmac

version: March_2013

firmware-version:

expansion-rom-version:

bus-info:

supports-statistics: yes

supports-test: no

supports-eeprom-access: no

supports-register-dump: yes

supports-priv-flags: no

LibreELEC:~ # ethtool eth0

Settings for eth0:

Supported ports: [ TP MII ]

Supported link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Half 1000baseT/Full

Supported pause frame use: Symmetric Receive-only

Supports auto-negotiation: Yes

Advertised link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Half 1000baseT/Full

Advertised pause frame use: Symmetric Receive-only

Advertised auto-negotiation: Yes

Link partner advertised link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Full

Link partner advertised pause frame use: Symmetric

Link partner advertised auto-negotiation: Yes

Speed: 1000Mb/s

Duplex: Full

Port: MII

PHYAD: 0

Transceiver: external

Auto-negotiation: on

Supports Wake-on: ug

Wake-on: d

Current message level: 0x0000003f (63)

drv probe link timer ifdown ifup

Link detected: yes

v8.1.5

Display Spoiler

C2B:~ # ethtool -i eth0

driver: st_gmac

version: March_2013

firmware-version:

expansion-rom-version:

bus-info:

supports-statistics: yes

supports-test: no

supports-eeprom-access: no

supports-register-dump: yes

supports-priv-flags: no

C2B:~ # ethtool eth0

Settings for eth0:

Supported ports: [ TP MII ]

Supported link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Half 1000baseT/Full

Supported pause frame use: Symmetric Receive-only

Supports auto-negotiation: Yes

Advertised link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Half 1000baseT/Full

Advertised pause frame use: Symmetric Receive-only

Advertised auto-negotiation: Yes

Link partner advertised link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Full

Link partner advertised pause frame use: Symmetric

Link partner advertised auto-negotiation: Yes

Speed: 1000Mb/s

Duplex: Full

Port: MII

PHYAD: 0

Transceiver: external

Auto-negotiation: on

Supports Wake-on: ug

Wake-on: d

Current message level: 0x0000003d (61)

drv link timer ifdown ifup

Link detected: yes

Thanks

TeHashX · Odroid xu4 TeHashX May 10, 2017 at 3:11 PM

Quote from TeHashX

Actually, I flashed LibreELEC-Odroid_XU3.arm-8.0-devel-20161004195217-r23907-gb0a1a38.img.gz on my XU4 and boot fine, but after showing LibreELEC logo I only get a blank image.
I open an issue here, and I hope someone read it.

Unfortunately, no response.
Nobody with a testing build?

TeHashX

To upgrade from LibreELEC-Odroid_C2.arm-8.0-rb-beta2b.tar to LibreELEC-Odroid_C2.arm-9.0-rb-alpha1.tar I only need this steps?

Code

touch /storage/.update/.nocompat
cd /storage/.update/
wget http://raybuntu.libreelec.tv/images/alpha/LibreELEC-Odroid_C2.arm-9.0-rb-alpha1.tar
reboot

After reboot just delete .tar?
Thanks
[hr]
I didn't wait for an answer and I done this steps, updated successfully, first thing I notice was the ssh root password changed to "libreelec"

TeHashX · Odroid xu4 TeHashX January 21, 2017 at 9:29 AM

Quote from Marciano

I found this somewhere but didn't try it.

Maybe is this what your looking for i think it is Jarvis.

Actually, I flashed LibreELEC-Odroid_XU3.arm-8.0-devel-20161004195217-r23907-gb0a1a38.img.gz on my XU4 and boot fine, but after showing LibreELEC logo I only get a blank image.
I open an issue here, and I hope someone read it.