Posts by Tim_Taylor

Good job.
Thanks.

Quote from DMC_12

not sure if this is the right section. ....

Nope

Just do it

Quote from Alex31

U mean Cec setting in Android, i need to start te X96 box wihout the sd with LibreElec on it?
Then cec off?

CEC settings in LE

Quote from essential

I'm using a Beelink MINI MXIII II (2GB Ram / 16GB Storge) and I used the gxl_p212_2g.dtb device tree. I have 8.0.1e installed on NAND, and 7.0.3.012j on a SD card at the moment.

Working OOB LE 8.0.1x - Hardware see my signature

Quote from AlexF

Isn't the idea that your (Denon AVR X3300) receiver does DAC and amplification (from HDMI)?

Highres Audio:
Best result playing highres audio is via USB-Stick plugged into AVR, but navigation is bad
Very good result is playing on hifiberry.

Normal Audio(flac, mp3) is playing well on Amlogic box

Quote from fat-tony

Hifiberry? Isn't that a Raspberry Pi build? Won't give me 4k video in the same package. I have two RPi's and they are used for 24x7 duties elsewhere on my LAN.

My setup:
4k Video = Amlogic box running Libreelec
Highres Audio = Raspberry PI + hifiberry running Libreelec

Audio hardware of Amlogic isn´t HiFi

Quote from fat-tony

I only have issues with 176.4 / 192kHz stereo output.
[hr]

Amlogix box and hires audio ?
Don´t belive it´s working fine.

Did You try hifiberry ?

Quote from Coupevt

I get a "Bootloader has not been updated" is that normal?

Yes

No special Kodi settings to play 4k sources.
I use NFS and external network adapter

Quote from envagyok

Hy,

how can I read CPU temperature over SSH?

type cputemp

Krypton-Box:~ # cputemp
45 C

write a script
vi my-temp.sh

#!/bin/bash
# Script: my-temp.sh
# -------------------------------------------------------
FILE=/sys/class/thermal/thermal_zone0/temp
CPU=`head -n 1 $FILE`
echo "CPU Temperature: $((CPU/1000))'C"

chmod +x my-temp.sh

Krypton-Box:~ # ./my-temp.sh
CPU Temperature: 46'C

Quote from albertstroh77

Booth were having the same problem.

My issue is solved using NFS protocol on my NAS(wired Gb) and USB-Network adaptor.
Known issue: SMB is not working

Try ASIX AX88178 chipset based Network adapter

Quote from albertstroh77

Not a single Bluray rip would play with out buffering.

1920x1080
There are many ways ripping standard Bluray

I'm talking about 4k UHD 10 bit resolution 3840x2160, for me it's not necessary to change buffering settings playing Jellyfish Bitrate Test Files(for example)
and 4k HDR playback of Sony Camp HDR version(for example).

In my case I found the bottleneck network and NFS protocol.
I guess the in Your case there is another reason.

I tested a lot
Buffering was no solution for me

Best result(for me) is using USB-Network adapter(Gb) and NFS protocol.
Alternative = USB HDD

Quote from bazsee89

I have a Beelink Mini MX III II (s905x 2\16gb)

Working fine installed on fast SD card.
Did You try a clean install ?
After upgrade from 7 to 8 I was disappointed

I startet with Eden in 2012.
You remember Frodo, Gotham, Helix and Isengard ?
They are all out of development, Jarvis too.

Now it´s the time of Krypton in the future it will be Leia.

It´s an example

find sdio device
udevadm info

/sys/bus/sdio/devices/sdio*
P: /devices/d0070000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
E: DEVPATH=/devices/d0070000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
E: DRIVER=ar6k_wlan
E: MODALIAS=sdio:c00v0271d0701
E: SDIO_CLASS=00
E: SDIO_ID=0271:0701
E: SUBSYSTEM=sdio
E: SYSTEMD_WANTS=qca9377-firmware-aml.service
E: TAGS=:systemd:
E: USEC_INITIALIZED=14828575

find Android kernel modules

mkdir -p /tmp/system
mount /dev/system /tmp/system
find /tmp/system -name *.ko


my box reports:
/tmp/system/lib/audio_data.ko
/tmp/system/lib/cfg80211.ko
/tmp/system/lib/compat.ko
/tmp/system/lib/dwc3.ko
/tmp/system/lib/dwc_otg.ko
/tmp/system/lib/mali.ko
/tmp/system/lib/wlan.ko

You have to find out the internal wifi chipset

Krypton-Box:~ # lsmod|grep wlan
cfg80211              360934  1 wlan

Example when module is cfg80211:

echo "blacklist cfg80211" >> /storage/.config/modprobe.d/blacklist.conf