Posts by dssnobie

Quote from kszaq

dssnobie The "Unknown command" should not be an issue. Make sure you enable Bluetooth in LibreELEC Settings first.

BT is enabled in the settings. Enabling it was the first I step.

Quote from dssnobie

kszaq I'd like to thank you for your efforts. Big improvement over OEM Android s/w.

I'm using LlibreELEC 7.90 on the TX5 Pro box, with S905x processor, 2GB RAM. Overall working very well, but I found 2 issues:
1. LE doesn't recognize bluetooth. I enabled BT within LE addon, but still no BT device found
2. Can't wake up box with remote control after it was "suspended". Blue LED is on, but nothing is happening. Works fine if box was powered down.

System log

LibreL:~ # lsmod
Module Size Used by
sha1_generic 2212 0
rfcomm 34202 6
hci_uart 22053 1
bnep 11100 2
dhd 713983 0
btsdio 3186 0
bluetooth 243236 34 bnep,btsdio,hci_uart,rfcomm
cfg80211 359759 1 dhd
6lowpan_iphc 5911 1 bluetooth
wifi_dummy 814 0
mali 200608 5
amlvideodri 11050 0
videobuf_res 5546 1 amlvideodri
videobuf_core 6723 2 amlvideodri,videobuf_res
videodev 145832 1 amlvideodri
media 21351 1 videodev
aml_nftl_dev 82916 0
fbcon 37265 0
bitblit 4460 1 fbcon
softcursor 1200 1 bitblit
font 7295 1 fbcon

Display More

It seems that BT adapter is working, but LE doesn't recognize it. Outputs from bluetoothctl and hciconfig
[bluetooth]# show
Controller E0:76:D0:F4:77:8B
Name: BlueZ 5.43
Alias: LibreL
Class: 0x1c0000
Powered: yes
Discoverable: no
Pairable: yes
UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
UUID: OBEX File Transfer (00001106-0000-1000-8000-00805f9b34fb)
UUID: Generic Access Profile (00001800-0000-1000-8000-00805f9b34fb)
UUID: OBEX Object Push (00001105-0000-1000-8000-00805f9b34fb)
UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
UUID: Audio Source (0000110a-0000-1000-8000-00805f9b34fb)
UUID: Audio Sink (0000110b-0000-1000-8000-00805f9b34fb)
UUID: Message Notification Se.. (00001133-0000-1000-8000-00805f9b34fb)
Modalias: usb:v1D6Bp0246d052B
Discovering: no

LibreL:~ # hciconfig
hci1: Type: Primary Bus: UART
BD Address: E0:76:D0:F4:77:8B ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING PSCAN
RX bytes:1346 acl:0 sco:0 events:76 errors:0
TX bytes:1743 acl:0 sco:0 commands:76 errors:0

hci0: Type: Primary Bus: SDIO
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:0 acl:0 sco:0 commands:0 errors:0

Please let me know if this is appropriate forum to post it.

Thank you

I found few errors in the lsusb -v output. Full output attached
bluetoothd[2631]: Failed to obtain handles for "Service Changed" characteristic
bluetoothd[2631]: hci1 Load Connection Parameters failed: Unknown Command (0x01)

kszaq I'd like to thank you for your efforts. Big improvement over OEM Android s/w.

I'm using LlibreELEC 7.90 on the TX5 Pro box, with S905x processor, 2GB RAM. Overall working very well, but I found 2 issues:
1. LE doesn't recognize bluetooth. I enabled BT within LE addon, but still no BT device found
2. Can't wake up box with remote control after it was "suspended". Blue LED is on, but nothing is happening. Works fine if box was powered down.

System log log-2017-01-08-19.42.46.zip

LibreL:~ # lsmod
Module Size Used by
sha1_generic 2212 0
rfcomm 34202 6
hci_uart 22053 1
bnep 11100 2
dhd 713983 0
btsdio 3186 0
bluetooth 243236 34 bnep,btsdio,hci_uart,rfcomm
cfg80211 359759 1 dhd
6lowpan_iphc 5911 1 bluetooth
wifi_dummy 814 0
mali 200608 5
amlvideodri 11050 0
videobuf_res 5546 1 amlvideodri
videobuf_core 6723 2 amlvideodri,videobuf_res
videodev 145832 1 amlvideodri
media 21351 1 videodev
aml_nftl_dev 82916 0
fbcon 37265 0
bitblit 4460 1 fbcon
softcursor 1200 1 bitblit
font 7295 1 fbcon