Hello all.
I am using a Astrometa DVB C USD dongle that is equipped with R828D + RTL2832P + Sony D2837ER.
The latest media_build drivers do not contain the module for Sony D2837ER, but they were present in the past.
How can I blocked the "DVB latest kernel from media_build" plugin from auto update the drivers?
Thank you.
Klojum : I found the required driver after I installed the "DVB drivers from the latest kernel" add-on.
The installation path is: "/usr/lib/kernel-overlay/driver.dvb.dvb-latest/lib/modules/4.19.23/upsates/driver.dvb.dvb-latest"
I apologize for the Thread.
Thank you for your time.
Best regards,
swimm3r
Thank you for your answer.
Further on I will use the "DVB drivers from the latest kernel" module add-on.
Hello,
I don't want to be rude, but I would like to ask you, why you didn't use the latest version of linuxtv drivers (linux-media-2019-02-19-9fabe1d108ca.tar.bz2 for example)?
I am asking this, because some of us are looking for Sony cxd2841er driver, and it is still missing.
Thank you very much.
Best regards,
swimm3r
HiassofT : You are right, It is all OK with LibreELEC 9.0
Thank you very much.
OR this one:
Kodi:~ # modinfo dvb_usb_dvbsky
filename: /lib/modules/4.9.80/updates/dvb-usb-dvbsky.ko
license: GPL
description: Driver for DVBSky USB
author: Max nibble <nibble.max@gmail.com>
alias: usb:v0CCDp0105d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0CCDp10A5d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0B48p3017d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0B48p3015d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0B48p3012d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0B48p3014d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0572p0320d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0572p680Cd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0572p960Cd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0572p6831d*dc*dsc*dp*ic*isc*ip*in*
depends: dvb_usb_v2,dvb-core,rc-core,m88ds3103
vermagic: 4.9.80 SMP mod_unload ARMv7 p2v8
parm: disable_rc:Disable inbuilt IR receiver. (int)
parm: adapter_nr:DVB adapter numbers (array of short)
Hello,
I found what is the problem: (the dvb_usb_v2 module is compiled with param disable_rc)
Kodi:~ # modinfo dvb_usb_v2
filename: /lib/modules/4.9.80/updates/dvb_usb_v2.ko
license: GPL
description: DVB USB common
author: Antti Palosaari <crope@iki.fi>
author: Patrick Boettcher <patrick.boettcher@posteo.de>
version: 2.0
srcversion: B0D81D80D59021DEE9B04C7
depends: rc-core,dvb-core
vermagic: 4.9.80 SMP mod_unload ARMv7 p2v8
parm: disable_rc_polling:disable remote control polling (default: 0) (int)
parm: force_pid_filter_usage:force all DVB USB devices to use a PID filter, if any (default: 0) (int)
I will try to update to LibreELEC 9.0 and I will return with status update.
Thank you very much for your time and support.
Best regards,
swimm3r
I use .config/rc_maps.cfg with the following content:
* rc-tt-1500 tt_1500
Thank you for your time and support.
Hello all,
I am using TechnoTrend TVStick CT2-4400 as DVB-C tuner, but I cant use the TT Remote Control because rc-5 protocol is disabled. Can anyone help me to enable the rc-5 protocol for ir-keytable?
Thank you very much.
dmesg | grep CT2
[ 3.728241] usb 1-1.3: dvb_usb_v2: found a 'TechnoTrend TVStick CT2-4400' in warm state
[ 3.728566] dvbdev: DVB: registering new adapter (TechnoTrend TVStick CT2-4400)
[ 3.774576] rc rc0: TechnoTrend TVStick CT2-4400 as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.3/rc/rc0
[ 3.835577] input: TechnoTrend TVStick CT2-4400 as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.3/rc/rc0/input0
[ 3.836343] usb 1-1.3: dvb_usb_v2: 'TechnoTrend TVStick CT2-4400' successfully initialized and connected
ir-keytable -v
Found device /sys/class/rc/rc0/
Input sysfs node is /sys/class/rc/rc0/input0/
Event sysfs node is /sys/class/rc/rc0/input0/event0/
Parsing uevent /sys/class/rc/rc0/input0/event0/uevent
/sys/class/rc/rc0/input0/event0/uevent uevent MAJOR=13
/sys/class/rc/rc0/input0/event0/uevent uevent MINOR=64
/sys/class/rc/rc0/input0/event0/uevent uevent DEVNAME=input/event0
Parsing uevent /sys/class/rc/rc0/uevent
/sys/class/rc/rc0/uevent uevent NAME=rc-tt-1500
/sys/class/rc/rc0/uevent uevent DRV_NAME=dvb_usb_dvbsky
input device is /dev/input/event0
/sys/class/rc/rc0/protocols protocol rc-5 (disabled)
Found /sys/class/rc/rc0/ (/dev/input/event0) with:
Driver dvb_usb_dvbsky, table rc-tt-1500
Supported protocols: rc-5
Enabled protocols:
Name: TechnoTrend TVStick CT2-4400
bus: 3, vendor/product: 0b48:3014, version: 0x0000
Repeat delay = 500 ms, repeat period = 125 ms
lsmod
Module Size Used by
hci_uart 15605 1
btbcm 5315 1 hci_uart
bluetooth 292114 3 hci_uart,btbcm
8021q 16771 0
rc_tt_1500 935 0
si2157 5037 1
si2168 8409 1
dvb_usb_dvbsky 7754 1
brcmfmac 184788 0
m88ds3103 10903 1 dvb_usb_dvbsky
i2c_mux 4067 2 m88ds3103,si2168
dvb_usb_v2 12099 1 dvb_usb_dvbsky
brcmutil 4893 1 brcmfmac
dvb_core 76172 3 dvb_usb_dvbsky,m88ds3103,dvb_usb_v2
cfg80211 247994 1 brcmfmac
rc_core 20369 4 dvb_usb_dvbsky,rc_tt_1500,dvb_usb_v2
rfkill 13757 3 bluetooth,cfg80211
bcm2835_gpiomem 2652 0
fixed 2407 0
Thank you chewitt for lighting us.
@Irusak: I think you are making fun of me. I said that LCDd is a daemon (please see Daemon_(computing) ).
So, only "lcdproc" client available is in LibreELEC repo, the LCDd service is missing. If I am wrong, I kindly ask you to update its description. Or maybe, we are talking about two different repos 
All the best to you !
//swimm3r
The lattst LCDproc addon should be available from the LibreELEC add-ons repository
Thanks. But I must run the LCDd (daemon) too. LCDproc addon is only a client to LCDd, no?
I search again the LibreELEC repo, and LCDproc addon is not there.
Btw, I am using the latest LibreELEC (v16.1), compiled on 29 Dec 2016
...
I found the add-on, with version="8.0.100", but it has dependency for <import addon="os.libreelec.tv" version="8.0"/>
I changed it to version 7.0, and now I could installed it.
I am still working on it.
Thank you very much for your support.
[hr]
I got this error:
Jan 07 13:51:35 RasberryPi sh[1085]: check_board_rev: This board is not recognized as a Raspberry Pi!
I think the "driver" is looking for BCM2708, but raspi uses BCM2709 
Can I change the driver from /usr/lib/lcdproc, or should I use other path for drivers?
[hr]
can you please tell me which is the default map for the GPIO pins?
Thank you very much.
[hr]
All done. It is up and running. Many thanks.
Hello all,
I am using LibreElec on RaspberryPi 2, and I would like to install service LCDd (for LCDproc plugin).
I used the zip from link LibreELEC but I can not install it. I got a warning, "failed to install from zip"
Can anyone help me?
I want to use LCDd for my LCD1602 display (on GPIO, not on I2C)
Thank you very much.
