Posts by InNursery

thanks Kszaq for your hard work

Quote from kszaq

You don't have to. Auto-update won't replace your device tree if it doesn't come from my repository.

I confirm work fine on my minix

I just try, and NO micro SD card is not mount.

Another thing

DTS-HD HRA is not working, no sound.

I test with kodi sample "DTS-HD HRA 5.1 (MKV @ 1080p/23.976 VC-1)" => NOK and another movies with TrueHD Atmos 7.1 => OK, DTS-HD MA 7.1 => OK, DTS-HD HRA 5.1=> NOK

Log files

version 8.2.0.1

Hi all

for my personal understood.

With this LibreELEC special release there is no 10-bit output at 1080 or 4K. It is limited to 8-bit. However, it's possible to get 8-bit, YCbCr 4:2:0 Rec.2020 HDR output on S912, correct ?

With

echo '444,10bit' > /sys/class/amhdmitx/amhdmitx0/attr

it is possible to enable 10bit output on YCbCr 4:4:4, correct ?

will it also add 10bit on other YCbCr (4:2:2, 4:2:0,..)?

or should I enable it with

echo '420,10bit' >> /sys/class/amhdmitx/amhdmitx0/attr

Thanks in advance

Here you find dtb.img from minix U9 last firmware

kszaq

tell me how to get it

Install libreELEC on a usb flash drive and use internal for data

this one

gxm_q200_2g.dtb

I have the minix Neo U9-H

Hi All

With my minix I can't get the micro SD card work, I have a sandisk and lexar 300x but they don't work.
So I made it run with a USB but it's really not fast and responsive compare to my Chromebox.

So I make this, boot from USB, use internal memory for data this make some improvement on the library response.
After I try to installing to internal memory with installtointernal command every runs fine but after reboot libreELEC error and black screen.

What is/are my mistake?
Any idea about the micro SD cards ?
Is that not working because I use internal memory for data before trying to install to internal?

thanks in advance for your help.

hi all

Same problem for me

unable to make it work with micro SD.

I use lexar microSDHC 300x.

Work fine on usb

So I made more test.

On micro SD

with LibreELEC-S912.arm-8.2-8.2.0.1.img.gz and gxm_q200_2g.dtb I get this error message

Error in mount_flash: mount_common: Could not LABEL=LIBREELEC

with LibreELEC-S912.arm-8.2-8.2.0.1.img.gz and wrxtasy gxm_q200_2g_minix_neo_u9.dtb I get the LibreELEC logo and the img check with the 15s waiting time to reboot. After reboot LibreELEC logo and black screen.

I try with other version of libreELEC but same result.

On Usb Stick

with LibreELEC-S912.arm-8.2-8.2.0.1.img.gz and gxm_q200_2g.dtb it works fine, it's just really slow due to my usb stick.

Thanks in advance for any suggestion about this problem.

I'm unable to make flash working with chromium, I use the install flash option in the add on setting.
I have the last version of LibreElec 7.90.010
Each time I try to access a web page with flash I get a flash message prompt for install.
If someone can tell me what's wrong it will be appreciated.
Thanks in advance