Posts by The Coolest

8.90.0 by adamg comes after afl1's 8.90.11a.

Devs making community builds can number their version as they see fit, there's no need to get confused.

@adamg

I guess you have a point. Many prefer to just ask instead of take a few minutes to do a search. Some don't know any better.

Yeah I've seen your posts about that (and the patch), I think it's great, it'll make life much easier to whoever wants to use those options.

GDPR-2

It might be a good idea to add a bold note about the IR Remote changes to the OP.

You need to make a new one, yourself.

Read posts #1 and #5 in this thread for instructions.

You can use Google Translate if you don't understand. It works well, from my experience.

tennis

How about going over the thread? Or you could read posts #1 and #5 and spend 10 minutes creating one yourself.

You can copy it directly to the SD card (unless you're booting from internal).

HeresJohnny

The Chroma setting doesn't matter to my TV, but if it looks fine on yours, then you're good.

HeresJohnny

You could, but how usable it will be depends on your TV.

On my LG, with 10 bit enabled, the TV goes into SDR BT2020 mode, which oversaturates color on all non-HDR content, making it look bad.

wintrmute

LE9.0 remote configs ir-keytable Amlogic devices

Also make sure that you update the DTB.

HeresJohnny

Before you start a video:

echo '444,10bit' > /sys/class/amhdmitx/amhdmitx0/attr

After video:

echo '444,8bit' > /sys/class/amhdmitx/amhdmitx0/attr

To apply the mode change, you need to either change resolution or refresh rate. It's fine if you have auto refresh rate enabled.

TheMexx  GDPR-2  2re

Last time I checked with my S905X box, HDR10 worked just fine on my B7, as long as I set the output to 10 bit.

Quote from androidguykodi

there anyway to keep my lcd clock working on my t95u pro android box when i load this ?

I sent you a PM.

korneel

Have you followed the instructions in this thread? LE9.0 remote configs ir-keytable Amlogic devices

That's odd. Perhaps it's a driver issue then.

Quote from ZRas

Had same issue with ethernet. Forcing interface speed to 100 mbit helped for me. Try this:
ethtool -s eth0 speed 100 duplex full

This sort of problem could also be due to a bad Ethernet cable, have you tried a different cable?

What box do you have? Is it a T95Z as well or something else? I wonder, could the T95Z contain a 100mbps chip, while being advertised as having 1Gbit?

redsquirrel87

Use Notepad++, go to Edit --> EOL Conversion --> Unix (LF).

erbas

Index of /releases/dtb

erbas There's a device-tree folder in the root of the SD card.