Posts by zramth

Quote from CvH

create an the folder in /storage/.config/firmware (or via network share) an place your fw there + reboot

Hello CvH,

I created an folder /storage/.config/firmware,place dvb-fe-ds300X.fw into it and renamed to dvb-fe-ds3000.fw , then reboot .

7.90.009 with Geniatech HDStar V3

dmesg | grep dvb
[ 6.486861] dvb-usb: found a 'SU3000HD DVB-S USB2.0' in warm state.
[ 6.487597] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 6.494388] dvb-usb: MAC address: 00:af:78:68:3a:21
[ 6.960669] dvb-usb: schedule remote query interval to 150 msecs.
[ 6.960687] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
[ 11.046515] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[ 12.139517] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...

lsusb
Bus 001 Device 004: ID 1f4d:3000 G-Tek Electronics Group
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Still no signal like before

Quote from CvH

it should be supported (also pls check our current alpha (7.90.009) )

if not pls dmesg | paste

Hello CvH,

I tried the 7.90.009 with Geniatech HDStar V3 , but not working. (still recognised as V1 or V2 I think)
I want to know should I replace the ds3000.fw with ds300x.fw ? Cause I found the ds300X.fw md5 is match with V3 which listed by LinuxTV.

How to replace the firmware? The system is read only. I remember setup a folder and copy ds300x.fw into it ? I tried but still failed.

Could you please specify the detail steps ?

Thank you !