Code
login as: root
[email protected]'s password:
##############################################
# LibreELEC #
# http://libreelec.tv #
##############################################
LibreELEC (community) Version: devel-20161214010941-r24953-ga71476c
LibreELEC git: a71476ccf68b69d4db52ffa6797bd0f06c51ce6a
LibreELEC:~ # dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.0 (cvh@cvh-buildbox) (gcc version 6.2.0 (GCC) )
#1 SMP Wed Dec 14 01:23:55 CET 2016
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio
n cache
[ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] cma: Reserved 8 MiB at 0x2e400000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 192512
[ 0.000000] free_area_init_node: node 0, pgdat 80c35400, node_mem_map add6400
0
[ 0.000000] Normal zone: 1692 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 192512 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 14 pages/cpu @aefaa000 s25292 r8192 d23860 u5734
4
[ 0.000000] pcpu-alloc: s25292 r8192 d23860 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 190820
[ 0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_
fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2709.boardrev=0xa02082
bcm2709.serial =0xbda49a83 smsc95xx.macaddr=B8:27:EB:A4:9A:83
bcm2708_fb.fbswap=1 bcm2709.uart_ clock=48000000
vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 boot=/dev/
mmcblk0p1 disk=/dev/mmcblk0p2 quiet root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kern
el.img usbcore.autosuspend=-1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 742076K/770048K available (6144K kernel code, 217K rwdata
, 1268K rodata, 3072K init, 402K bss, 19780K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xaf800000 - 0xff800000 (1280 MB)
[ 0.000000] lowmem : 0x80000000 - 0xaf000000 ( 752 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80700000 (7136 kB)
[ 0.000000] .init : 0x80900000 - 0x80c00000 (3072 kB)
[ 0.000000] .data : 0x80c00000 - 0x80c366a8 ( 218 kB)
[ 0.000000] .bss : 0x80c38000 - 0x80c9ca2c ( 403 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming leve
l low
[ 0.000000] arm_arch_timer: WARNING: Please fix your firmware
[ 0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming leve
l low
[ 0.000000] arm_arch_timer: WARNING: Please fix your firmware
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (ph
ys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 43980
46511078ns
[ 0.000018] Switching to timer-based delay loop, resolution 52ns
[ 0.000223] Console: colour dummy device 80x30
[ 0.000240] console [tty0] enabled
[ 0.000260] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 38.00 BogoMIPS (lpj=64000)
[ 0.000274] pid_max: default: 32768 minimum: 301
[ 0.000425] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000433] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001230] Disabling cpuset control group subsystem
[ 0.001339] CPU: Testing write buffer coherency: ok
[ 0.001755] CPU0: update cpu_capacity 1024
[ 0.001762] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001811] Setting up static identity map for 0x100000 - 0x100034
[ 0.003689] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming leve
l low
[ 0.003693] arm_arch_timer: WARNING: Please fix your firmware
[ 0.003700] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming leve
l low
[ 0.003702] arm_arch_timer: WARNING: Please fix your firmware
[ 0.003713] CPU1: update cpu_capacity 1024
[ 0.003719] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004319] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming leve
l low
[ 0.004322] arm_arch_timer: WARNING: Please fix your firmware
[ 0.004327] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming leve
l low
[ 0.004329] arm_arch_timer: WARNING: Please fix your firmware
[ 0.004338] CPU2: update cpu_capacity 1024
[ 0.004343] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.004901] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming leve
l low
[ 0.004904] arm_arch_timer: WARNING: Please fix your firmware
[ 0.004909] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming leve
l low
[ 0.004911] arm_arch_timer: WARNING: Please fix your firmware
[ 0.004920] CPU3: update cpu_capacity 1024
[ 0.004925] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.004997] Brought up 4 CPUs
[ 0.005008] SMP: Total of 4 processors activated (153.00 BogoMIPS).
[ 0.005011] CPU: All CPU(s) started in HYP mode.
[ 0.005014] CPU: Virtualization extensions available.
[ 0.005564] devtmpfs: initialized
[ 0.015045] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3
rev 4
[ 0.015278] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 6370867519511994 ns
[ 0.015694] pinctrl core: initialized pinctrl subsystem
[ 0.016168] NET: Registered protocol family 16
[ 0.018393] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.033368] cpuidle: using governor ladder
[ 0.046733] cpuidle: using governor menu
[ 0.047386] Serial: AMBA PL011 UART driver
[ 0.050223] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.050688] uart-pl011 3f201000.serial: could not find pctldev for node /soc/
gpio@7e200000/uart0_pins, deferring probe
[ 0.101038] bcm2835-dma 3f007000.dma: DMA legacy API manager at af80f000, dma
chans=0x1
[ 0.102752] SCSI subsystem initialized
[ 0.103019] usbcore: registered new interface driver usbfs
[ 0.103094] usbcore: registered new interface driver hub
[ 0.103172] usbcore: registered new device driver usb
[ 0.103633] raspberrypi-firmware soc:firmware: Attached to firmware from 2016
-12-09 15:15
[ 0.105012] clocksource: Switched to clocksource arch_sys_counter
[ 0.116010] NET: Registered protocol family 2
[ 0.116697] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.116803] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.116988] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.117072] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.117113] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.117302] NET: Registered protocol family 1
[ 0.117622] RPC: Registered named UNIX socket transport module.
[ 0.117626] RPC: Registered udp transport module.
[ 0.117630] RPC: Registered tcp transport module.
[ 0.117634] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.263925] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.264243] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.277778] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.280108] NFS: Registering the id_resolver key type
[ 0.280137] Key type id_resolver registered
[ 0.280142] Key type id_legacy registered
[ 0.280155] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.283568] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
51)
[ 0.283576] io scheduler noop registered (default)
[ 0.283582] io scheduler deadline registered
[ 0.283842] io scheduler cfq registered
[ 0.288522] BCM2708FB: allocated DMA memory ee510000
[ 0.288543] BCM2708FB: allocated DMA channel 0 @ af80f000
[ 0.334296] Console: switching to colour frame buffer device 228x61
[ 0.361382] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.361470] vc-cma: Videocore CMA driver
[ 0.361476] vc-cma: vc_cma_base = 0x00000000
[ 0.361480] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 0.361486] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.361662] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000
000(1008 MiB)
[ 0.375235] brd: module loaded
[ 0.375388] loop: module loaded
[ 0.378886] nbd: registered device at major 43
[ 0.390572] usbcore: registered new interface driver rtsx_usb
[ 0.390579] Loading iSCSI transport class v2.0-870.
[ 0.390987] iscsi: registered transport (tcp)
[ 0.391449] libphy: Fixed MDIO Bus: probed
[ 0.391454] tun: Universal TUN/TAP device driver, 1.6
[ 0.391457] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 0.391742] usbcore: registered new interface driver dm9601
[ 0.391825] usbcore: registered new interface driver smsc95xx
[ 0.391857] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.617865] Core Release: 2.80a
[ 0.617874] Setting default values for core params
[ 0.617903] Finished setting default values for core params
[ 0.818243] Using Buffer DMA mode
[ 0.818248] Periodic Transfer Interrupt Enhancement - disabled
[ 0.818252] Multiprocessor Interrupt Enhancement - disabled
[ 0.818257] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.818270] Dedicated Tx FIFOs mode
[ 0.818593] WARN::dwc_otg_hcd_init:1049: FIQ DMA bounce buffers: virt = 0xae5
04000 dma = 0xee504000 len=9024
[ 0.818620] FIQ FSM acceleration enabled for :
[ 0.818620] Non-periodic Split Transactions
[ 0.818620] Periodic Split Transactions
[ 0.818620] High-Speed Isochronous Endpoints
[ 0.818620] Interrupt/Control Split Transaction hack enabled
[ 0.818627] dwc_otg: Microframe scheduler enabled
[ 0.818672] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80511f00
[ 0.818681] WARN::hcd_init_fiq:414: FIQ ASM at 0x80512260 length 36
[ 0.818692] WARN::hcd_init_fiq:439: MPHI regs_base at 0xaff7a000
[ 0.818748] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.818780] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number
1
[ 0.818809] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 0.818855] Init: Port Power? op_state=1
[ 0.818859] Init: Power Port (0)
[ 0.819033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.819043] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 0.819050] usb usb1: Product: DWC OTG Controller
[ 0.819058] usb usb1: Manufacturer: Linux 4.9.0 dwc_otg_hcd
[ 0.819065] usb usb1: SerialNumber: 3f980000.usb
[ 0.819747] hub 1-0:1.0: USB hub found
[ 0.819781] hub 1-0:1.0: 1 port detected
[ 0.820365] dwc_otg: FIQ enabled
[ 0.820369] dwc_otg: NAK holdoff enabled
[ 0.820372] dwc_otg: FIQ split-transaction FSM enabled
[ 0.820384] Module dwc_common_port init
[ 0.820584] usbcore: registered new interface driver usb-storage
[ 0.820783] mousedev: PS/2 mouse device common for all mice
[ 0.820927] i2c /dev entries driver
[ 0.822211] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.822471] bcm2835-cpufreq: min=600000 max=1200000
[ 0.822912] sdhci: Secure Digital Host Controller Interface driver
[ 0.822916] sdhci: Copyright(c) Pierre Ossman
[ 0.823270] sdhost: log_buf @ ae507000 (ee507000)
[ 0.875019] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.897132] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.897135] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 0.928374] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.928645] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.928704] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.929746] usbcore: registered new interface driver usbhid
[ 0.929748] usbhid: USB HID core driver
[ 0.930545] vchiq: vchiq_init_state: slot_zero = 0xae580000, is_master = 0
[ 0.933245] NET: Registered protocol family 10
[ 0.933525] mmc0: host does not support reading read-only switch, assuming wr
ite-enable
[ 0.934899] NET: Registered protocol family 17
[ 0.934956] Key type dns_resolver registered
[ 0.935270] Registering SWP/SWPB emulation handler
[ 0.939325] vc-sm: Videocore shared memory driver
[ 0.939331] [vc_sm_connected_init]: start
[ 0.939421] mmc0: new high speed SDHC card at address 0007
[ 0.939667] [vc_sm_connected_init]: end - returning 0
[ 0.941040] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud
= 0) is a PL011 rev2
[ 0.941167] mmcblk0: mmc0:0007 SD32G 29.0 GiB
[ 0.941290] console [netcon0] enabled
[ 0.941292] netconsole: network logging started
[ 0.941294] of_cfs_init
[ 0.941334] of_cfs_init: OK
[ 0.944086] Freeing unused kernel memory: 3072K (80900000 - 80c00000)
[ 0.947548] mmcblk0: p1 p2
[ 0.951818] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.953337] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.954858] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.957586] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.016405] random: fast init done
[ 1.025095] Indeed it is in host mode hprt0 = 00021501
[ 1.054732] mmc1: new high speed SDIO card at address 0001
[ 1.198361] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.198451] Indeed it is in host mode hprt0 = 00001101
[ 1.388637] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 1.388648] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.389136] hub 1-1:1.0: USB hub found
[ 1.389198] hub 1-1:1.0: 5 ports detected
[ 1.492247] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incomp
atibilities
[ 1.493166] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incomp
atibilities
[ 1.652517] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O
pts: (null)
[ 1.668427] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.758612] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 1.758625] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber
=0
[ 1.761362] smsc95xx v1.0.5
[ 1.815457] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-
1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:a4:9a:83
[ 1.888430] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
[ 2.001119] usb 1-1.2: New USB device found, idVendor=09da, idProduct=024f
[ 2.001134] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber
=0
[ 2.001141] usb 1-1.2: Product: RF USB Receiver
[ 2.001148] usb 1-1.2: Manufacturer: A4Tech
[ 2.014230] input: A4Tech RF USB Receiver as /devices/platform/soc/3f980000.u
sb/usb1/1-1/1-1.2/1-1.2:1.0/0003:09DA:024F.0001/input/input0
[ 2.069462] hid-generic 0003:09DA:024F.0001: input,hidraw0: USB HID v1.11 Key
board [A4Tech RF USB Receiver] on usb-3f980000.usb-1.2/input0
[ 2.091257] input: A4Tech RF USB Receiver as /devices/platform/soc/3f980000.u
sb/usb1/1-1/1-1.2/1-1.2:1.1/0003:09DA:024F.0002/input/input1
[ 2.145773] hid-generic 0003:09DA:024F.0002: input,hidraw1: USB HID v1.11 Mou
se [A4Tech RF USB Receiver] on usb-3f980000.usb-1.2/input1
[ 2.345457] systemd[1]: System time before build time, advancing clock.
[ 2.351769] usb 1-1.4: new full-speed USB device number 5 using dwc_otg
[ 2.368533] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SEL
INUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL
- XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 2.369068] systemd[1]: Detected architecture arm.
[ 2.369376] systemd[1]: Set hostname to <LibreELEC>.
[ 2.455867] usb 1-1.4: New USB device found, idVendor=1997, idProduct=7b03
[ 2.455882] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber
=0
[ 2.455891] usb 1-1.4: Product: Multimedia Air Mouse Keyboard
[ 2.455898] usb 1-1.4: Manufacturer:
[ 2.461563] input: Multimedia Air Mouse Keyboard as /devices/platform/soc/3
f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1997:7B03.0003/input/input2
[ 2.512509] systemd[1]: Created slice User and Session Slice.
[ 2.512881] systemd[1]: Listening on udev Kernel Socket.
[ 2.513392] systemd[1]: Created slice System Slice.
[ 2.513532] systemd[1]: Reached target Slices.
[ 2.513660] systemd[1]: dev-hugepages.mount: Couldn't determine result for Co
nditionVirtualization=!private-users, assuming failed: No such file or
directory
[ 2.513937] systemd[1]: Listening on Journal Socket.
[ 2.516709] hid-generic 0003:1997:7B03.0003: input,hidraw2: USB HID v1.10 Key
board [ Multimedia Air Mouse Keyboard] on usb-3f980000.usb-1.4/input0
[ 2.516767] systemd[1]: Starting Setup machine-id...
[ 2.525661] input: Multimedia Air Mouse Keyboard as /devices/platform/soc/3
f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:1997:7B03.0004/input/input3
[ 2.582693] hid-generic 0003:1997:7B03.0004: input,hiddev0,hidraw3: USB HID v
1.10 Mouse [ Multimedia Air Mouse Keyboard] on usb-3f980000.usb-1.4/input1
[ 2.927095] systemd-journald[209]: Received request to flush runtime journal
from PID 1
[ 3.489035] random: crng init done
[ 4.567052] Console: switching to colour dummy device 80x30
[ 4.790128] usb 1-1.4: Warning! Unlikely big volume range (=65535), cval->res
is probably wrong.
[ 4.790146] usb 1-1.4: [2] FU [Mic Capture Volume] ch = 1, val = -32768/32767
/1
[ 4.794721] usbcore: registered new interface driver snd-usb-audio
[ 5.114716] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f2
00000
[ 5.262560] usbcore: registered new interface driver brcmfmac
[ 5.777613] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2
016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
[ 5.816247] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0
x30)
[ 6.039236] uart-pl011 3f201000.serial: no DMA platform data
[ 6.264534] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 6.264788] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.468853] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.468869] brcmfmac: power management disabled
[ 7.224869] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 10.551134] Bluetooth: Core ver 2.22
[ 10.551219] NET: Registered protocol family 31
[ 10.551225] Bluetooth: HCI device and connection manager initialized
[ 10.551246] Bluetooth: HCI socket layer initialized
[ 10.551259] Bluetooth: L2CAP socket layer initialized
[ 10.551289] Bluetooth: SCO socket layer initialized
[ 10.558932] Bluetooth: HCI UART driver ver 2.3
[ 10.558945] Bluetooth: HCI UART protocol H4 registered
[ 10.558950] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 10.559103] Bluetooth: HCI UART protocol Broadcom registered
[ 291.951783] usb 1-1.5: new high-speed USB device number 6 using dwc_otg
[ 292.042465] usb 1-1.5: New USB device found, idVendor=0572, idProduct=c689
[ 292.042480] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber
=3
[ 292.042487] usb 1-1.5: Product: EyeTV Stick
[ 292.042496] usb 1-1.5: Manufacturer: Geniatech
[ 292.042502] usb 1-1.5: SerialNumber: 160421
[ 292.113545] dvb-usb: found a 'Mygica T230C DVB-T/T2/C' in warm state.
[ 292.355654] dvb-usb: will pass the complete MPEG2 transport stream to the sof
tware demuxer.
[ 292.355915] DVB: registering new adapter (Mygica T230C DVB-T/T2/C)
[ 292.422239] dvb-usb: no frontend was attached by 'Mygica T230C DVB-T/T2/C'
[ 292.422952] input: IR-receiver inside an USB DVB receiver as /devices/platfor
m/soc/3f980000.usb/usb1/1-1/1-1.5/input/input4
[ 292.423996] dvb-usb: schedule remote query interval to 100 msecs.
[ 292.424520] dvb-usb: Mygica T230C DVB-T/T2/C successfully initialized and con
nected.
[ 292.424726] usbcore: registered new interface driver dvb_usb_cxusb
[ 299.222019] TCP: request_sock_TCP: Possible SYN flooding on port 9981. Droppi
ng request. Check SNMP counters.
LibreELEC:~ #
login as: root
[email protected]'s password:
##############################################
# LibreELEC #
# http://libreelec.tv #
##############################################
LibreELEC (community) Version: devel-20161214010941-r24953-ga71476c
LibreELEC git: a71476ccf68b69d4db52ffa6797bd0f06c51ce6a
LibreELEC:~ # dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.0 (cvh@cvh-buildbox) (gcc version 6.2.0 (GCC) )
#1 SMP Wed Dec 14 01:23:55 CET 2016
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio
n cache
[ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] cma: Reserved 8 MiB at 0x2e400000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 192512
[ 0.000000] free_area_init_node: node 0, pgdat 80c35400, node_mem_map add6400
0
[ 0.000000] Normal zone: 1692 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 192512 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 14 pages/cpu @aefaa000 s25292 r8192 d23860 u5734
4
[ 0.000000] pcpu-alloc: s25292 r8192 d23860 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 190820
[ 0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_
fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2709.boardrev=0xa02082
bcm2709.serial =0xbda49a83 smsc95xx.macaddr=B8:27:EB:A4:9A:83
bcm2708_fb.fbswap=1 bcm2709.uart_ clock=48000000
vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 boot=/dev/
mmcblk0p1 disk=/dev/mmcblk0p2 quiet root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kern
el.img usbcore.autosuspend=-1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 742076K/770048K available (6144K kernel code, 217K rwdata
, 1268K rodata, 3072K init, 402K bss, 19780K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xaf800000 - 0xff800000 (1280 MB)
[ 0.000000] lowmem : 0x80000000 - 0xaf000000 ( 752 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80700000 (7136 kB)
[ 0.000000] .init : 0x80900000 - 0x80c00000 (3072 kB)
[ 0.000000] .data : 0x80c00000 - 0x80c366a8 ( 218 kB)
[ 0.000000] .bss : 0x80c38000 - 0x80c9ca2c ( 403 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming leve
l low
[ 0.000000] arm_arch_timer: WARNING: Please fix your firmware
[ 0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming leve
l low
[ 0.000000] arm_arch_timer: WARNING: Please fix your firmware
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (ph
ys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 43980
46511078ns
[ 0.000018] Switching to timer-based delay loop, resolution 52ns
[ 0.000223] Console: colour dummy device 80x30
[ 0.000242] console [tty0] enabled
[ 0.000262] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 38.00 BogoMIPS (lpj=64000)
[ 0.000279] pid_max: default: 32768 minimum: 301
[ 0.000426] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000433] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001239] Disabling cpuset control group subsystem
[ 0.001346] CPU: Testing write buffer coherency: ok
[ 0.001769] CPU0: update cpu_capacity 1024
[ 0.001777] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001828] Setting up static identity map for 0x100000 - 0x100034
[ 0.003686] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming leve
l low
[ 0.003691] arm_arch_timer: WARNING: Please fix your firmware
[ 0.003697] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming leve
l low
[ 0.003700] arm_arch_timer: WARNING: Please fix your firmware
[ 0.003711] CPU1: update cpu_capacity 1024
[ 0.003716] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004318] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming leve
l low
[ 0.004321] arm_arch_timer: WARNING: Please fix your firmware
[ 0.004325] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming leve
l low
[ 0.004328] arm_arch_timer: WARNING: Please fix your firmware
[ 0.004336] CPU2: update cpu_capacity 1024
[ 0.004342] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.004902] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming leve
l low
[ 0.004906] arm_arch_timer: WARNING: Please fix your firmware
[ 0.004910] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming leve
l low
[ 0.004913] arm_arch_timer: WARNING: Please fix your firmware
[ 0.004921] CPU3: update cpu_capacity 1024
[ 0.004926] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.004997] Brought up 4 CPUs
[ 0.005008] SMP: Total of 4 processors activated (153.00 BogoMIPS).
[ 0.005012] CPU: All CPU(s) started in HYP mode.
[ 0.005015] CPU: Virtualization extensions available.
[ 0.005562] devtmpfs: initialized
[ 0.015035] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3
rev 4
[ 0.015269] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 6370867519511994 ns
[ 0.015686] pinctrl core: initialized pinctrl subsystem
[ 0.016162] NET: Registered protocol family 16
[ 0.018389] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.033368] cpuidle: using governor ladder
[ 0.046733] cpuidle: using governor menu
[ 0.047386] Serial: AMBA PL011 UART driver
[ 0.050226] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.050691] uart-pl011 3f201000.serial: could not find pctldev for node /soc/
gpio@7e200000/uart0_pins, deferring probe
[ 0.101037] bcm2835-dma 3f007000.dma: DMA legacy API manager at af80f000, dma
chans=0x1
[ 0.102757] SCSI subsystem initialized
[ 0.103025] usbcore: registered new interface driver usbfs
[ 0.103100] usbcore: registered new interface driver hub
[ 0.103177] usbcore: registered new device driver usb
[ 0.103637] raspberrypi-firmware soc:firmware: Attached to firmware from 2016
-12-09 15:15
[ 0.104996] clocksource: Switched to clocksource arch_sys_counter
[ 0.115985] NET: Registered protocol family 2
[ 0.116665] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.116771] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.116955] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.117040] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.117081] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.117272] NET: Registered protocol family 1
[ 0.117591] RPC: Registered named UNIX socket transport module.
[ 0.117596] RPC: Registered udp transport module.
[ 0.117600] RPC: Registered tcp transport module.
[ 0.117604] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.263919] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.264242] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.277778] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.280108] NFS: Registering the id_resolver key type
[ 0.280130] Key type id_resolver registered
[ 0.280134] Key type id_legacy registered
[ 0.280148] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.283543] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
51)
[ 0.283551] io scheduler noop registered (default)
[ 0.283556] io scheduler deadline registered
[ 0.283816] io scheduler cfq registered
[ 0.288510] BCM2708FB: allocated DMA memory ee510000
[ 0.288530] BCM2708FB: allocated DMA channel 0 @ af80f000
[ 0.333388] Console: switching to colour frame buffer device 228x61
[ 0.360465] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.360552] vc-cma: Videocore CMA driver
[ 0.360559] vc-cma: vc_cma_base = 0x00000000
[ 0.360564] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 0.360569] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.360747] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000
000(1008 MiB)
[ 0.374163] brd: module loaded
[ 0.374316] loop: module loaded
[ 0.377987] nbd: registered device at major 43
[ 0.389723] usbcore: registered new interface driver rtsx_usb
[ 0.389731] Loading iSCSI transport class v2.0-870.
[ 0.390114] iscsi: registered transport (tcp)
[ 0.390574] libphy: Fixed MDIO Bus: probed
[ 0.390580] tun: Universal TUN/TAP device driver, 1.6
[ 0.390583] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 0.390852] usbcore: registered new interface driver dm9601
[ 0.390936] usbcore: registered new interface driver smsc95xx
[ 0.390974] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.617010] Core Release: 2.80a
[ 0.617020] Setting default values for core params
[ 0.617048] Finished setting default values for core params
[ 0.817390] Using Buffer DMA mode
[ 0.817395] Periodic Transfer Interrupt Enhancement - disabled
[ 0.817399] Multiprocessor Interrupt Enhancement - disabled
[ 0.817405] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.817420] Dedicated Tx FIFOs mode
[ 0.817750] WARN::dwc_otg_hcd_init:1049: FIQ DMA bounce buffers: virt = 0xae5
04000 dma = 0xee504000 len=9024
[ 0.817777] FIQ FSM acceleration enabled for :
[ 0.817777] Non-periodic Split Transactions
[ 0.817777] Periodic Split Transactions
[ 0.817777] High-Speed Isochronous Endpoints
[ 0.817777] Interrupt/Control Split Transaction hack enabled
[ 0.817784] dwc_otg: Microframe scheduler enabled
[ 0.817830] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80511f00
[ 0.817839] WARN::hcd_init_fiq:414: FIQ ASM at 0x80512260 length 36
[ 0.817851] WARN::hcd_init_fiq:439: MPHI regs_base at 0xaff7a000
[ 0.817906] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.817940] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number
1
[ 0.817968] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 0.818014] Init: Port Power? op_state=1
[ 0.818018] Init: Power Port (0)
[ 0.818192] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.818202] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 0.818210] usb usb1: Product: DWC OTG Controller
[ 0.818217] usb usb1: Manufacturer: Linux 4.9.0 dwc_otg_hcd
[ 0.818224] usb usb1: SerialNumber: 3f980000.usb
[ 0.818933] hub 1-0:1.0: USB hub found
[ 0.818965] hub 1-0:1.0: 1 port detected
[ 0.819552] dwc_otg: FIQ enabled
[ 0.819556] dwc_otg: NAK holdoff enabled
[ 0.819559] dwc_otg: FIQ split-transaction FSM enabled
[ 0.819570] Module dwc_common_port init
[ 0.819773] usbcore: registered new interface driver usb-storage
[ 0.819973] mousedev: PS/2 mouse device common for all mice
[ 0.820118] i2c /dev entries driver
[ 0.821366] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.821616] bcm2835-cpufreq: min=600000 max=1200000
[ 0.822067] sdhci: Secure Digital Host Controller Interface driver
[ 0.822071] sdhci: Copyright(c) Pierre Ossman
[ 0.822400] sdhost: log_buf @ ae507000 (ee507000)
[ 0.875003] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.897078] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.897082] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 0.928355] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.928616] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.928675] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.929709] usbcore: registered new interface driver usbhid
[ 0.929711] usbhid: USB HID core driver
[ 0.930516] vchiq: vchiq_init_state: slot_zero = 0xae580000, is_master = 0
[ 0.932256] NET: Registered protocol family 10
[ 0.932809] NET: Registered protocol family 17
[ 0.932856] Key type dns_resolver registered
[ 0.933144] Registering SWP/SWPB emulation handler
[ 0.935209] vc-sm: Videocore shared memory driver
[ 0.935215] [vc_sm_connected_init]: start
[ 0.936320] mmc0: host does not support reading read-only switch, assuming wr
ite-enable
[ 0.938634] mmc0: new high speed SDHC card at address 0007
[ 0.938964] mmcblk0: mmc0:0007 SD32G 29.0 GiB
[ 0.939204] [vc_sm_connected_init]: end - returning 0
[ 0.940353] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud
= 0) is a PL011 rev2
[ 0.940666] console [netcon0] enabled
[ 0.940668] netconsole: network logging started
[ 0.940670] of_cfs_init
[ 0.940721] of_cfs_init: OK
[ 0.943631] Freeing unused kernel memory: 3072K (80900000 - 80c00000)
[ 0.944832] mmcblk0: p1 p2
[ 0.953288] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.954811] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.957727] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.960504] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.009304] random: fast init done
[ 1.025086] Indeed it is in host mode hprt0 = 00021501
[ 1.106626] mmc1: new high speed SDIO card at address 0001
[ 1.198353] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.198446] Indeed it is in host mode hprt0 = 00001101
[ 1.388488] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 1.388496] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.388888] hub 1-1:1.0: USB hub found
[ 1.388934] hub 1-1:1.0: 5 ports detected
[ 1.668355] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.758572] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 1.758582] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber
=0
[ 1.761231] smsc95xx v1.0.5
[ 1.815241] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-
1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:a4:9a:83
[ 1.888354] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
[ 2.001083] usb 1-1.2: New USB device found, idVendor=09da, idProduct=024f
[ 2.001093] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber
=0
[ 2.001100] usb 1-1.2: Product: RF USB Receiver
[ 2.001107] usb 1-1.2: Manufacturer: A4Tech
[ 2.014256] input: A4Tech RF USB Receiver as /devices/platform/soc/3f980000.u
sb/usb1/1-1/1-1.2/1-1.2:1.0/0003:09DA:024F.0001/input/input0
[ 2.069475] hid-generic 0003:09DA:024F.0001: input,hidraw0: USB HID v1.11 Key
board [A4Tech RF USB Receiver] on usb-3f980000.usb-1.2/input0
[ 2.091020] input: A4Tech RF USB Receiver as /devices/platform/soc/3f980000.u
sb/usb1/1-1/1-1.2/1-1.2:1.1/0003:09DA:024F.0002/input/input1
[ 2.145510] hid-generic 0003:09DA:024F.0002: input,hidraw1: USB HID v1.11 Mou
se [A4Tech RF USB Receiver] on usb-3f980000.usb-1.2/input1
[ 2.351692] usb 1-1.4: new full-speed USB device number 5 using dwc_otg
[ 2.455837] usb 1-1.4: New USB device found, idVendor=1997, idProduct=7b03
[ 2.455847] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber
=0
[ 2.455855] usb 1-1.4: Product: Multimedia Air Mouse Keyboard
[ 2.455862] usb 1-1.4: Manufacturer:
[ 2.461268] input: Multimedia Air Mouse Keyboard as /devices/platform/soc/3
f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1997:7B03.0003/input/input2
[ 2.516019] hid-generic 0003:1997:7B03.0003: input,hidraw2: USB HID v1.10 Key
board [ Multimedia Air Mouse Keyboard] on usb-3f980000.usb-1.4/input0
[ 2.524278] input: Multimedia Air Mouse Keyboard as /devices/platform/soc/3
f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:1997:7B03.0004/input/input3
[ 2.579098] hid-generic 0003:1997:7B03.0004: input,hiddev0,hidraw3: USB HID v
1.10 Mouse [ Multimedia Air Mouse Keyboard] on usb-3f980000.usb-1.4/input1
[ 2.785021] usb 1-1.5: new high-speed USB device number 6 using dwc_otg
[ 2.875600] usb 1-1.5: New USB device found, idVendor=0572, idProduct=c689
[ 2.875610] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber
=3
[ 2.875617] usb 1-1.5: Product: EyeTV Stick
[ 2.875624] usb 1-1.5: Manufacturer: Geniatech
[ 2.875631] usb 1-1.5: SerialNumber: 160421
[ 6.214825] random: crng init done
[ 18.615067] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incomp
atibilities
[ 18.615829] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incomp
atibilities
[ 18.722257] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O
pts: (null)
[ 19.228244] systemd[1]: System time before build time, advancing clock.
[ 19.241869] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SEL
INUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL
- XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 19.242178] systemd[1]: Detected architecture arm.
[ 19.242344] systemd[1]: Set hostname to <LibreELEC>.
[ 19.325781] systemd[1]: Listening on udev Control Socket.
[ 19.326061] systemd[1]: Started Forward Password Requests to Wall Directory W
atch.
[ 19.326176] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 19.327030] systemd[1]: Created slice User and Session Slice.
[ 19.327281] systemd[1]: Created slice System Slice.
[ 19.328953] systemd[1]: Mounting POSIX Message Queue File System...
[ 19.330743] systemd[1]: Mounting Variable Directory...
[ 19.707222] systemd-journald[215]: Received request to flush runtime journal
from PID 1
[ 21.296443] Console: switching to colour dummy device 80x30
[ 21.431346] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f2
00000
[ 21.704335] usbcore: registered new interface driver brcmfmac
[ 22.056511] usb 1-1.4: Warning! Unlikely big volume range (=65535), cval->res
is probably wrong.
[ 22.056534] usb 1-1.4: [2] FU [Mic Capture Volume] ch = 1, val = -32768/32767
/1
[ 22.058973] usbcore: registered new interface driver snd-usb-audio
[ 22.077990] dvb-usb: found a 'Mygica T230C DVB-T/T2/C' in warm state.
[ 22.325501] dvb-usb: will pass the complete MPEG2 transport stream to the sof
tware demuxer.
[ 22.326536] DVB: registering new adapter (Mygica T230C DVB-T/T2/C)
[ 22.443282] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2
016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
[ 22.466045] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0
x30)
[ 22.579575] dvb-usb: no frontend was attached by 'Mygica T230C DVB-T/T2/C'
[ 22.580462] input: IR-receiver inside an USB DVB receiver as /devices/platfor
m/soc/3f980000.usb/usb1/1-1/1-1.5/input/input4
[ 22.583801] dvb-usb: schedule remote query interval to 100 msecs.
[ 22.584679] dvb-usb: Mygica T230C DVB-T/T2/C successfully initialized and con
nected.
[ 22.584975] usbcore: registered new interface driver dvb_usb_cxusb
[ 22.812705] uart-pl011 3f201000.serial: no DMA platform data
[ 23.018311] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 23.018972] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.224237] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.224255] brcmfmac: power management disabled
[ 24.189536] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 28.377639] Bluetooth: Core ver 2.22
[ 28.377732] NET: Registered protocol family 31
[ 28.377734] Bluetooth: HCI device and connection manager initialized
[ 28.377747] Bluetooth: HCI socket layer initialized
[ 28.377754] Bluetooth: L2CAP socket layer initialized
[ 28.377771] Bluetooth: SCO socket layer initialized
[ 28.383238] Bluetooth: HCI UART driver ver 2.3
[ 28.383248] Bluetooth: HCI UART protocol H4 registered
[ 28.383253] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 28.383366] Bluetooth: HCI UART protocol Broadcom registered
[ 49.953326] TCP: request_sock_TCP: Possible SYN flooding on port 9981. Droppi
ng request. Check SNMP counters.
[ 529.782811] TCP: request_sock_TCP: Possible SYN flooding on port 9981. Droppi
ng request. Check SNMP counters.There was no device in tvheadend webinterface