Well, a WD 3TB Elements with a single USB cable connected to a Nexbox A95X-A1 does work flawlessly ootb.
Mostly, Hdd closure is required external power supply adaptor but portabl external hdd does not required extra power supply and easily connects to andriod tv box.
Display MoreHi!
does anyone connected a USB HDD 2.5" and use it ?
I'm not sure if the tvboxes have the engount power to work flawless with it
My 905x have a 5v 2.0A but I don't know how much power requiere the box and how many it is available for the USB
Thanks
I connect Hdd 2.5 enclosure to my andriod box and that’s why I purchased adaptor 5v 4.0A and works like a charm. I connect two external hdd at a time, one is external western digital passport 500gb and second is sea gaye 500gb (sata enclosure).
Remove the sd card.
when I use previous adamg build, these build are working great and reboot to internal works. But in latest adamg build reboot to internal not working? I m going back to kazaq’s build.
I install adamg latest build on sd card, when I select reboot to internal (android) but failed. I can’t go back to android?
Are you shure it's the right one? What type of box do you have, and which device tree did you use?
yes i have nexbox S905X 1g 8g. I use device tree of S905X(Gxl p212 1g.dtb). I used this device tree to all previous builds but no problem exists. This is first time I experience this type of problem?
Replace the dtb.img on the sd card with the right one;)
I replace correct dtb (http://sx05.eu/s905/8.2/device_trees)but still stuck in boot?
Yes, the same installation as GDPR-2 builds.
I write this build (LibreELEC-S905.arm-8.90.9K.img.gz)
on my sd card through Rufus( clean install) but stuck in boot screen. After that I again install Adamg build and update ur tar build (LibreELEC-S905.arm-8.90.9K.tar) file and system running successfully. How to clean install ur build (LibreELEC-S905.arm-8.90.9K.img.gz)
New version LE 9.0 with dvb driver addons. Now internal dvb drivers are built also in kernel to fix issue with hw accelaration.
can I use this build on Nexbox S905X Andriod Tv Box?
No newer builds from adamg?
I have to agree. I have the same thing is happening to me.
EDIT:
LibreELEC:~ # modprobe amlvideodri
modprobe: FATAL: Module amlvideodri not found in directory /lib/modules/3.14.29
Adamg’s (this last build named LibreELEC-S905.arm-adamg-1.0.8) build have also this bug, in which amcodec accereleration is not working.
Enable hw acceleration and reboot box.
hardware acceleration is enable in player setting But LibreELEC is running in software acceleration. My box becomes heat up very soon and system is showing cpu and memory usage very high in system information while playing movie ( sorry for bad English.) My box temperature becomes 70c to 73c after half hour.
Fixed test build with CvH dvb driver addons:
LibreELEC-S905.arm-8.90.7-23-gc6828c9-K.tar
Included wetekdvb.service (wetekdvb driver starts now).
I install this build but hardware acceleration is enable in setting but working in software acceleration?
Subtitles border outlining sometimes last >100ms. I prepared build with disabled border outlining.
with due respect kindly prepare build for S905X box.
afl1... with due respect kindly link your updated build for S905X.
While I can't confirm this (yet - I'll have to try it again at home) I came across something strange yesterday evening. I was watching two episodes of a tv series (BBC production) with 25fps. No stuttering at all with external subtitles enabled.
I m watching 720p mkv format I notice minor stuttering for the very first line of subtitles.
Display MoreThat's quite an interesting statement, based entirely on "assumption(s)", and wrongful...
Because,
as SoC definition suggests:
See where Mali-450 is residing?
Two chips, next to the CPU, are memory modules.
The third - NAND/eMMC.
As per "performance" governor,
you have to add this line in "/storage/.config/autostart.sh":
Codeecho performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governorto make it a persistent setting each boot/reboot.
After first testing the behavior of the box (performance and thermal state), of course.
can you share autostart.sh file. I create auostart through notepad in windows but it’s not working. I have no idea about Linux that’s why kindly share the autostart.sh file.
And which on this picture is the GPU?
I assume that two of chips along with Amlogic process is known as gpu 
(one of them) but after that procedure which I mention above post, my box becomes heat proof. Now I will install usb fan outside of my box as soon as possible.
How to CPU governor is set to performance?
Would you, please, be able to elaborate on GPU chip, on which you've expicitly installed a dedicated heatsink?
I'm very curious to see that.
I m uploading picture of sample of my box’s pic. My box name is nexbox S905X. I purchase 3 piece of raspberry pi 3 hearsink with thermal pad and stick it( with thermal pad) on Amlogic
Processor heatsink (combine and joint 2 heat sink together) and remaing 2 heat sink paste with thermal pad on two chips (which u can see on pic which I upload along side with Amlogic processor) .sorry for bad English and late reply.
