kszaq was the f build meant to enable AP6212A BT functionality?
Posts by SEIKT
-
-
Thanks. Please also grab
udevadm info /sys/bus/mmc/devices/sdio\:0001/sdio\:0001\:*
systemctl status brcmfmac_sdio-firmware-aml.service.Also check if systemctl start brcmfmac_sdio-firmware-aml.service makes BT available?
Yep.
systemctl start brcmfmac_sdio-firmware-aml.service didn't enable BT.
-
Thanks for trying. Can you please grab and post systemctl status | paste and ps | paste?
Sure thing.
-
In Jarvis builds there should be no micro-stutter except for the videos that are known to cause issues.
[hr]
OP udated with 7.0.3.012d build. I switched my development focus to Krypton builds now, so this is very little tested but the changes are very minor. In case anything stops working, 7.0.3.012c is still available.Please report if Bluetooth still works in this build if you have AP6xxx WiFi/BT chip. I have used an alternative way to load BT firmware in this build which should make BT work for AP6212A.
Unfortunately bluetooth is not working on my AP6212A using the 7.0.3.012d build. "No Bluetooth adapter is found".
-
SEIKT You have AP6212a chip. Unfortunately there is no BT firmware for that chip in Amlogic sources yet. The other issue is that I don't know how to differentiate AP6212 from AP6212a in systemd.Bummer. Hopefully one appears soon.
-
Run these and post results:
dmesg | paste
udevadm info /sys/bus/sdio/devices/sdio* | paste
lsusb -vvv | pasteThanks kszaq. Actually lsmod reports that the bluetooth module is loaded. SSHed to the wrong box before, but LibreELEC is reporting that no bluetooth adapter is found. Here are the lsmod results if interested:
And the other results as requested:
-
Can someone please let me know what commands I need to enter via SSH to identify my boxes bluetooth chipset. lsmod indicates that the bluetooth module isn't loaded.
-
Is bluetooth working on anyone's S905X Mini M8S II? Not working on mine... no adapter is found.
-
If you're using SD / USB, just use a different card. If you're on Nand, I'd be restoring the latest Android FW then follow the steps to install, listed on OP
Yeah, it's on nand. Bummer, was hoping to avoid that marathon. Ah well, guess it will pay off to avoid freezing. Thanks man.
-
Can anyone advise how to perform a clean install?. I'm wanting to transition to a 32 bit build.
Cheers.
-
Does anyone have any speed test data for the nexbox a95x? I have one with the stock rom and I mostly want to flash it Libre to solve wifi issues. I can barely get 5mbs even 5 meters away from the router.wifi on the nexbox is dog shit. i suggest buying a usb wifi dongle.
-
Available memory went from 1.5 GB to 500 MB overnight. Memory leak still prevalent.
Nexbox A95X S905X 2GB
-
Thanks for your hard work kszaq.
Does 7.0.3.010 support WiFi dongles with this chipset : RTL8811AU
If not, can you direct me to a list of supported wifi dongles?
Cheers