The disk model depends mainly on the used HW for the PCIe interface.
I use an Argon NEO case with an integrated NVMe interface and Kingston SSD KC3000 M.2 1TB. It works without any problems.
I'm using it now with RPi OS and Tvheadend, but I also tested the LibreELEC installation on it for a few days and it was completely trouble-free there as well.
I use several script calls in the Power Menu, and they often include kodi-send command, and everything works exactly as expected. There is no reason why something in the Power Menu should work differently than in other menus. The Power Menu is just like any other menu, the only thing that makes it "Power" is that it uses Kodi commands to control the status of Kodi and power status of the system.
Display MoreAfter a little bit of playing around with LibreELEC-Generic.x86_64-9.80-nightly-20200324-aeb6e84.img.gz, I am happy to say that the NUC10i7FNH and NUC10i7FNK Frost Canyon Comet Lake NUCs are fully operational!!
I have an extensive local library with several high bit rate, 4K, Dolby ATMOS, DTS-HD files and they are all rocking!!
I did a clean build on both systems utilizing different types of drives and all seem to be working perfectly.
Both systems are running BIOS 39, 16GB RAM, and have the IR sensor configured as RC6. I am able to control both with my Harmony remote configured as a media center remote.
This should help with everyone's shelter in place!! Thank you all for the suggestions in getting these new NUCs up and running!!
Hope everyone is safe and well.
My question: do Bluetotth and Wi-Fi work well under LE?
Addon System Tools from LibeELEC Add-ons Repository.
See video Terminal on LibreELEC.
Sanity Harmony in LibreELEC (Linux) works as a keyboard via HUB and BT only, but it does not work as a keyboard via IR.
Hi,
I'm close to pulling the trigger on a j4105 board and have been checking on this thread periodically.
Anyone know if there have been any updates to HDR in Linux and Kodi? Looks like kernel 5.3 has been released so it might already be useable?
Also, reading through this thread, it seems that the j4105 will be supported in regards to HDR? It has a UHD Graphics 600 (Gen 9.5 LP GT1 up to 700MHz) GPU.
Thanks
I live in the belief that at least UHD 620 is required for HDR 10.
chewitt .. I tried again, unfortunately it makes no difference. 'Bluetooth adapter not found'
I've with bluetooth at my asrock Beebox the same problem. Did you have any succes?
