Posts by crazycat

no support for 0ccd:10a6 in dvb_usb_az6027 driver.

em28xx: Extended WinTV DualHD DVB & ATSC support. · crazycat69/linux_media@e3ed099 · GitHub

Quote from snailboy1

i've added this to /etc/modprobe.d/dvb_options.conf
it's copied to the .config itself after a couple of reboots..

Code

options dvb_usb_dw2102 transfer_mode=0
options dvb_usb_cxusb transfer_mode=0

so should work with both devices?
i'm still getting the issue though with both devices (with 1 disabled at a time in case relatd).

This modules not have transfer_mode option. You can check available module options + some description with modinfo

modinfo dvb_usb_dw2102

Need three patches for t230c support
t230c

Look like no full info about dual-channel empia media usb bridge. So implemented partial support.

Not implemented in driver

Quote from bam

Yes, it does, but I need CrasyCats ones - mainstream drivers are buggy for me, but CC proven fine..

ljalves-cc is crazycat69/linux_media

you must know more about your tuner hardware what tuner IC and etc ?

Check open-source mn88436 driver from TBS
add the demod'mn88436'and tuner 'mxl603'
added support TBS6704

Quote from lordslash

The driver was written by CrazyCat only a few weeks ago. You can contact him through the tvheadend forum or on his github page and try to troubleshoot the problems (I suppose the Kodi log could be enough), he seems really kimd and smart

I also read this topic

Quote from highkick05

nice work crazycat
tested latest branch w/ tbs5990. not sure what is happening & used make menuconfig (see logs)

I had your previous tbs5990 earlier branch tuner A working today with modprobe option for bulk transfer (success worked)
However Tuner B had poll/retune issue in tvheadend.

maybe my setup - ubuntu 14.04 - 4.2 kernel not sure what I'm doing wrong

Ok, look like incorrect i2c bus nums used.
I make extend dual demod config for cx231xx driver - cx231xx: Extend dual demod config. · crazycat69/linux_media@fe5dbaa · GitHub
and disable analog audio support (ALSA) for TBS boxes - cx231xx: Disable analog audio support per device. · crazycat69/linux_media@71c347f · GitHub
so not need disable CX231XX Alsa support in config.

Please check latest branch (with my updated media_build).
Same for 5280, 5281 users.

Quote from Besuz

that means that the Cable-drivers from your repo are the same as the normal from dd?

yes

Quote from Besuz

Digital Devices Cine C/T v6 is working with your build, but on some channels i got playback problems.
i already know that the cable connection is not the best here, mybe the crazycat drivers are not yet handling "bad signal situations" as good as the dd-drivers?
we will check the connection with special equipment and maybe i will blame my provider.

In my dddvb repo changes only for satellite demod drivers stv090x, stv0910, mxl5xx. No any changes for ter/cable DD devices.

dvb-firmwares.tar.bz2

make install ?

ok
Look like i find solution for cx231xx i2c bus 2 sending - cx231xx-i2c: Workaround for I2C-3 write issue. · crazycat69/linux_media@5c9e4fa · GitHub
And 5990 support moved to latest branch (+ added demod reset) - cx231xx: TBS 5990 support. · crazycat69/linux_media@9c9522b · GitHub
So please check latest branch (with my updated media_build).
[hr]

Quote from pepesuriano

CvH latest version of libreelec includes latest version of crazycat si2168 branch?

si2168 branch deleted.
dvb-c annex b support for si2168 added to latest branch - si2168: DVB-C annex B support. · crazycat69/linux_media@5e05976 · GitHub

yes, 5220, 5881 and 5281 supported

try USB bulk transfer mode instead default ISO

options cx231xx transfer_mode=0