Posts by Gammeto
-
-
The new 9.2.7 image is ready for the test: LibreELEC-MXQ-4K-Pro_2G.arm-9.2.7.img.gz
Please use the previously linked dtb and remote.conf for this image.
Dtech - all is working correctly - wi-fi, remote - thank you!
-
.... You need this: remote.conf ....
This is really true now the remote is working, thank you dtech
Will you make a device tree for RTL8723BS wi-fi ?
-
I made a new image that already has the correct remote control config.
I restored the original wifi/bluetooth stack so this version should be checked to see if it works:
Index of /3rdParty/S805-LE-9.2.6/MXQ-S85/
Unfortunately, dmesg doesn’t tell us anything about the wlan interface.
Please try this under LE 8.2.3:
... and this:
.............
I tried under 8.2.3 -
LibreELEC (community): 8.2.3.1-temp_sensor_disabled (S905.arm)
LibreELEC:~ # lshw -C network
-sh: lshw: not found
LibreELEC:~ # cat /sys/class/net/wlan0/device/vendor
0x024c
LibreELEC:~ # cat /sys/class/net/wlan0/device/device
0xb723
-
If you still have LE 8.2.3, I would need a dmesg.
Somehow I should identify the wifi because it could easily be that you have a wifi chip that is missing from the image.
Okay, I'm investigating this because I don't know which wifi/bluetooth chip is in the MK808B+ device.
Hi dtech - the dmesg log - Untitled in plain_text (s35bms77qe) - PasteCode.io
Please notice and remote control, because I have problem with remote too, I try to make own remote.conf but when I press a key nothing is logged with "dmesg –c"
-
Thank you dtech i tried with this tree, the box starts, but have only wired /lan/ network, wifi and remote control don't work. I copied remote.conf from http://remote.conf/4040-m8s and paste into storage/.config folder, but the remote doesn't work.
When I use build 8.2.3 of Libreelec with the same device three have not problems with wifi and remote control.
Can you give me advice or help me. Thank you in advance.
-
Dtech = thank you for answer, but for the older build of Libreelec I used device tree gxbb_p200_2G_100M_RealtekWiFi because the lan of my Mini M8S is 100 mbit, if I use S905-LE-9.2.6/MXQ-Pro-4K_1G may be I will have problems with network, if it is possible can you tell me where I can download device tree gxbb_p200_2G_100M_RealtekWiFi for this new release.
-
-
-
Hi, I've already installed this build, till now I haven't any problems with the box except the Quasar add-on. After installation of Quasar it's appear a message that the system should be restart, after rebooting the box appears the same message too.
-
I want to try this image on my mini M8S box, but see that in s905/7.0.2.009/device_trees/ it isn't .dtb named for this box, which of all I should download to burn a sd card.