Posts by Totosse

-t 3 makes no difference

i checked with w_scan and it can't find any channels. it finds frequences with muxes but fails to get channels from them. Same thing on windows, but with dvb-t(2) it works

Quote from jan.kowalski

T230c doesn't work out of the box with LibreELEC. Is necessary to install LibreELEC DVB Drivers CrazyCat.

Totosse, MyGiga T230c is VERY GOOD stick, probably is the best low price stick for DVB-C and DVB-T. I think your problem with this stick is configuration of your network, not stick itself.

It's posible that one stick can work great and one can't. I tried to use w_scan and windows apps and my stick fails to find any channel. So i can't confirm it is very good.

sadly i can't find anything besides t230c and astrometa v1 or v2

I actually decided to give up on mygica t230c and i would like to ask if i buy astrometa v1 will it be stable with qam256 dvb-c?

Quote from Peelige

Did you enter your network ID in DVB inputs > Networks ? Network discovery set to on ? Then Force Scan. It should pick up the muxes automatically, so no need to enter muxes manually.

IIRC, it took a good while for the muxes to show up in tvheadend after initiating the scan and possibly took overnight.

network id is set for 0, network discovery is on. forcescan only makes my scan active for 2-3 secs then it goes back to idle
my dmesg
my tvheadend log
2016-12-07 03:39:07.902 mpegts: 298MHz in inter - tuning on Silicon Labs Si2168 : DVB-C #0
2016-12-07 03:39:07.903 subscription: 0001: "scan" subscribing to mux "298MHz", weight: 6, adapter: "Silicon Labs Si2168 : DVB-C #0", network: "inter", service: "Raw PID Subscription"
2016-12-07 03:39:12.902 mpegts: 298MHz in inter - scan no data, failed
2016-12-07 03:39:12.902 subscription: 0001: "scan" unsubscribing

i enter both freq and qam correctly but it still show nothing.
can you please send a picture of your settings? (network adapter mux)
[hr]
just checked dvb-t. works in windows, doesn't work in vdr or tvheadend
+on windows signal strengh drop to 0 every 2-10 secs for ten mins then go stable for like 4-5 then drops every 2-10 secs again

Quote from jan.kowalski

Me too.

here i reupload LibreELEC

Quote from CvH

then it is most likely an settings error at Tvh, could you try if it works with VDR ? (to ensure that the driver is not the problem) ?

VDR finds 6 channels out of 200+, this channels also can be found by tv without dvb-c support

He said it works with 256

i tried to change different settings without result. only found out that annex_c doesn't work at all (426MHz in inter - tuning on Silicon Labs Si2168 : DVB-C #02016-12-05 15:03:04.000 linuxdvb: Silicon Labs Si2168 : DVB-C #0 - failed to tune [e=Invalid argument])

7r9BaaoJM8A.jpg other hosting
What do you mean by default?

thank you. now it doesn't show error message, but shows that instead
2016-12-04 15:25:18.646 subscription: 0003: "scan" subscribing to mux "258MHz", weight: 6, adapter: "Silicon Labs Si2168 : DVB-C #0", network: "inter", service: "Raw PID Subscription"
2016-12-04 15:25:23.644 mpegts: 258MHz in inter - scan no data, failed
2016-12-04 15:25:23.644 subscription: 0003: "scan" unsubscribing
2016-12-04 15:25:42.073 mpegts: 536MHz in inter - tuning on Silicon Labs Si2168 : DVB-C #0
2016-12-04 15:25:42.073 subscription: 0004: "scan" subscribing to mux "536MHz", weight: 6, adapter: "Silicon Labs Si2168 : DVB-C #0", network: "inter", service: "Raw PID Subscription"
2016-12-04 15:25:47.073 mpegts: 536MHz in inter - scan no data, failed

Quote from CvH

could you post an dmesg | paste ?
btw your images are not loading

attached file

every image or just first 3?

i finally connected t230c to tvheadend, but now it doesnt scan muxes.

error is 2016-12-03 12:20:49.856 mpegts: 258MHz in inter - tuning on Silicon Labs Si2168 : DVB-C #02016-12-03 12:20:49.856 linuxdvb: Silicon Labs Si2168 : DVB-C #0 - failed to tune [e=Invalid argument]
i use settings from the provider :
image10_pr.jpg
image11_pr.jpg
image12_pr.jpg
my settings:
here
i left no auto options in settings and it still doesnt scan

Quote from CvH

yes there its activated i guess (i have to say i had not tested this image at all)

thanks for help
there's only CrazyCat drivers. Guess i have to wait for stable release (but how long?)

Quote from CvH

pls wait for an proper 7.90.009 version (a lot changes), also the 230c is still not full supported at the ljalves-CC drivers - this drivers did you activated yes ?

what do you mean activate? if in dvb driver configurator i only have CC

Quote from CvH

Generic LE 7.90.007 ljalves-CC + DDDVB (the other stuff didn't compile) BUT 100% untested, I post it because I don't know if I am able to test it tomorrow.

LibreELEC-Generic.x86_64-8.0.0-dvb-drivers-0.01.tar

I installed this version but my tv adapters folder in tvheadend is still empty
i have 230c