Posts by kostaman

  • [S905] Device trees

    Quote from geek0001

    Finally, does anyone know why the dtb.img extracted from the Android partition would not work? Am I doing the wrong thing?

    Android device tree is useless for booting LE.

    Whilst in LE You can check what chip you have by running SSH:

    Sorry just saw you opened box. That sv6051p chip. is not known to me.

    ITM-1020 | Products | iotTech Corp

    Don't like your chances of getting source code for modules.

    If you've got a spare USB Port you can get a USB Wifi adapter.

    Code
    udevadm info /sys/bus/sdio/devices/sdio*

  • feedback for test build LibreELEC-RK3328

    Quote from Kwiboo

    Thanks for this, I made new test builds with latest mpp at Index of /test/, I am still seeing some issue with opening hevc files, need to check what is going on (could be my kernel or ffmpeg patches that is at fault).

    Gave this a shot. Rock64 didn't like it.

    SD 720 x 576 Mpeg2 Live TV TVHeadend Client Displayed as 4:3 video with out of sync Audio.

    Some of my Network Movie files refused to open. Spinning wheel continuously . Had to hit stop or it just stayed like that for 3 minutes.

    Anyway i'll enjoy LibreELEC-RK3328.arm-9.0-devel-20180606204626-0267cea-rock64 till the next test.

    Thanks again.;)

  • feedback for test build LibreELEC-RK3328

    Quote from kostaman

    These tests are done with SD Card and eMMC installed at the same time. I will monitor and report back with results using SD Card only to compare.

    OKAY I thought i would do a Fresh Install LE SD Card to eliminate variables.

    Fresh LE Vanilla.

    eMMC Inserted with android-7.1-rock-64-rock64_atv-v0.3.13-r115-raw.img

    Booting Via SD Card (LibreELEC-RK3328.arm-9.0-devel-20180606204626-0267cea-rock64)

    Well this did not go well as far as results with playback and freezing goes.

    For some reason the fresh install made things worse even before scanning library and install TV Headend Client.

    Loops on start up with freezing. Scrolling library files froze box.

    I also had a soft bootup come up after kodi crashed too many times. Never seen this before.

    I took the SSH Log just in case it helps.

    Anyway the SD Card only inserted works a treat at the moment so we'll wait for the eMMC installed with SD Card LE simultaneously.

    Code
    LibreELEC (community): devel-20180606204626-0267cea (RK3328.arm)
LibreELEC:~ # paste /storage/.kodi/temp/kodi.log
http://ix.io/1cAg
LibreELEC:~ # dmesg | paste
http://ix.io/1cAh

    http://ix.io/1cag

    http://ix.io/1cah

  • feedback for test build LibreELEC-RK3328

    Quote from Kwiboo

    Please report new issues seen on these images compared to latest nightly.

    eMMC Inserted with android-7.1-rock-64-rock64_atv-v0.3.13-r115-raw.img

    Booting Via SD Card (LibreELEC-RK3328.arm-9.0-devel-20180606204626-0267cea-rock64)

    Kwiboo Very good results with development image using .tar to update.

    The strangest thing is that i was not expecting anything to be fixed with the eMMC and SD Card LE inserted at the same time.

    I thought i would give it a shot and was pleasantly surprised when the Rock64 booted up and did not freeze.^^

    The first time i tried the box booted into LE and rebooted itself TWICE before becoming stable and usable.

    I have turned off and on at least 10 times with a 99% successful boot up without freeze.

    Sometimes it will boot up to the Leia splash or the home page and reboot to a black screen then continue to boot from the start of a boot with LE Splash / Leia splash / and Home page and freeze no red light just white light. Have to power off with power button and turn on again for a successful bootup.

    This is the only version i have ever used that has booted up and not frozen with LE on SD Card and Android TV eMMC inserted at the same time.

    It's not perfect but is working at a 9 out of 10 power ups. ;)

    I have had the odd time when the box is just idling dim screen then it suddenly rebooted itself through the bootup cycle. /shrug

    Black after Stop is fixed. 1080P 50hz now available in whitelist and i use that as GUI .

    Playing TV Headend Client channels at 50hz i can now stop and no black screen going back.

    I've noticed Live TV Mpeg2 SD channels are now Hardware Decoding.

    Noticed after playing Mpeg2 for a while the picture freezes and a repetitive sound continues with both red and white lights gone out.

    Have to power off to reboot.

    These tests are done with SD Card and eMMC installed at the same time. I will monitor and report back with results using SD Card only to compare.

    You are now Officially the Rockchip King:thumbup:

  • feedback for test build LibreELEC-RK3328

    Quote from LeoD

    Make sure that all eMMC/SD partitions are labelled differently, and that they match their entries in the corresponding configuration files, respectively:

    e2label <-> /boot/efi/extlinux/extlinux.conf

    dosfslabel <-> /etc/fstab

    Otherwise the wrong partition(s) may be mounted at boot time

    I'm out of my depth here. Only have MacOS to SSH via Terminal App. No linux machine. Happy to try command lines that will output more details.

    See SSH Output.

    I booted up with eMMC Android TV and LE SD Card both inserted.

    First boot : It booted into LE Splash screen but error codes all over screen. SSH was alive so i logged .

    LibreELECrock64:~ # paste /storage/.kodi/temp/kodi.log

    http://ix.io/1cry

    LibreELECrock64:~ # dmesg | paste

    http://ix.io/1cs0

    Second & Third attempt Booted to LE Home Screen. SSH but it froze. Got some logs.

    # dmesg | paste

    http://ix.io/1cs4

    # paste /storage/.kodi/temp/kodi.log

    http://ix.io/1cs5

    # paste /storage/.kodi/temp/kodi.log

    http://ix.io/1csg

    # dmesg | paste

    http://ix.io/1csi


    I Removed eMMC and Rebooted with SD Card Only.

    log-2018-06-06-07.36.35.zip

  • feedback for test build LibreELEC-RK3328

    Quote from Kernle32DLL

    I tried Kwiboo s branch "rockchip-part6" at d404a14.


    From what I can tell, this fixes the "black-after-stop" issue (as seen by kostaman in 330aad4).

    Well done. Thank you for the information.

    BTW have you or anyone tried using Android TV running on eMMC and LibreElec running via SD Card at the same time ?

    I cannot get LE to run whilst eMMC is inserted.

    It boots to a certain stage but freezes.

  • feedback for test build LibreELEC-RK3328

    Kwiboo

    LibreELEC (community): nightly-20180603-330aad4 (RK3328.arm)

    This update didn't go very well. I presume the migration was for the whitelist option whatever.

    My TV Booted into 640 x 480

    Input Stream Adaptive, RTMP Input

    Became incompatible.

    System Settings Display

    I noticed there were two 1080p in the list to choose from.

    I chose the first one and it changed to 60hz.

    Second one switched to 59.94hz

    There is no 1080p 50hz

    Whitelist for 1080p

    1080p 60hz / 59.94hz / 24hz / 23.987hz

    Again no 50hz

    Bottom line is i can't use this version due to TV Headend Client Live tv or recordings not adjusting refresh rate from GUI and upon stop i get the dreaded black screen.

    BTW : I took screenshots which are just a .png of a black screenshot.

    I tried SSH but obviously things don't work like they used to in the old s905 boxes.

    Code
    LibreELEC (community): nightly-20180603-330aad4 (RK3328.arm)
LibreELECrock64:~ # fw_printenv hdmimode
-sh: fw_printenv: not found
LibreELECrock64:~ # fw_printenv outputmode
-sh: fw_printenv: not found
LibreELECrock64:~ # fw_setenv hdmimode 1080p50hz
-sh: fw_setenv: not found
LibreELECrock64:~ # fw_setenv outputmode 1080p50hz
-sh: fw_setenv: not found
LibreELECrock64:~ #

  • [8.2.3.1] LibreELEC 8.2 for S905/S905X

    Quote from Tager

    S905w Box.

    Used:

    LibreELEC-S905.arm-8.2-8.2.3.1-temp_sensor_disabled.img.gz

    and gxl_p212_1g.dtb

    So why did you use a temp sensor image for an s905w ?

    Nobody will know what steps you have taken to burn the correct image.

    The fact you just picked an image with temp sensor disabled worries me.

    What box you're trying to boot should not be a secret either.

    Your screenshot basically shows you have gone into recovery mode.

    SD Card not mentioned anywhere.