Does internal installation have the same issue whith on/off like sd one on nexbox a95x 1/8?
Thanks.
#872
Tested by me.
Posts by kostaman
-
-
Not valid ip i think he has no ethernet connection.
When that happens you get a weird number starting with 168 or something like that ?
I think the device tree he is using is wrong.
But not enough info is provided. -
Because i know SD boots are working i flashed a new 007 image, tried all the different DTB's and none of them worked.This guy in thread #210 seems to have got it going ?
Sorry just trying to help with dtb. just double check your device tree's used. -
Sometimes i see checking update.. verification failed.
Are you seeing Libreelec Bootup Logo then the script or are you seeing Android recovery robot with the scripts ?
I am trying to see how far you are getting before failure. I don't know if you are getting to LE or you are still in Android recovery when it fails.
[hr]
put SD files from SD image to SD cardI just want you to confirm the following.
Did you
- Download img.gz file from SD release folder.
- Unpack image to your computer hard drive and Burning it to SD card ? Because you say you PUT SD Files from SD Image to SD Card.
You don't mention Burning the image to the SD Card. -
It starts but then fails.Fails how exactly ? What happens ? It fails tells me nothing.
What is on the screen when you say it fails ? -
Still mot working cannot get other images installed only the hq18q. Verification failed during installation.Verzonden vanaf mijn iPhone met Tapatalk
Please verify whether you are trying to install SD CARD or NAND Internal Memory LE ?
Is "invalid signature error" part of the "verification failed during installation" script you describe ? -
In the meantime
Do a FRESH install with the wifi dtb. If you have already done that ignore me. -
Where can i find the hd18q image? Already tried the remote.conf but the remote still doesnt work -
Q: My remote control does not work, what can I do?
A: Try both MXQ and HD18Q releases. If this doesn't work, grab remote.conf file from Android firmware (it's available in /system/etc) and copy it to Configuration folder: /storage/.config over SSH or \\your_box_IP\Configuration using Windows shares. You may need to remap some buttons, though.
From #1 -
Got it!
Adjust refresh rate of the display to match video frame rate of live TV streams using simple iptv client not working.
Sorry about that "Lost In Translation"
Have you played around with settings ?
I use "On start/stop"
Pause during refresh rate change "Off"
My TV seems to respond to these settings but this may not be the case with your TV.
Sorry about the misunderstanding. Good Luck with it. -
Read Changelog before posting something as a bug.Jerky playback of some 29.97fps videos and some Live TV channels (Amlogic HW decoder bug).
-
I should have mentioned, this is an SD installation. Not NAND.You will have to check with kszaq on that 1gb wifi fix device tree.
I have a 2gb box with the 2gb wifi fix tree so there is a difference.
Having said that, the 1gb wifi fix device tree fixed the wifi for a NEXBOX A95X 1gb/8gb.
Sorry that is all i can tell you with the boxes i have tried. -
Display More
Hi,
I have a Mini m8s and ever since I found libreelec for it it was everything I needed. But since earlier today the little box has been acting up: every few seconds-minutes the HDMI signal is lost and my avr gets a reconnect. Often this is announced by erratic lines on the screen. This is what I tried so far:
update from 7.0.2.006 to 007 - no change
reboot into nand to check if android has the same issues - check, same problem still persists
check cable, temperature, power suply, power cycle - check everyrthing looks normal
checked if other devices work normal with the avr - check everything behaves as it shouldso it seems to be an issue with my mini m8s but I still have hope that one of you knpws how to fix it
thanks
First thing is to try different HDMI cable.
Secondly is it working OK just with box straight to TV . Not sure what AVR connection means with your set up. -
On my T95N - S905 - 1G/8G box I have triedgxbb_p200_1G_100M_RealtekWiFi.dtb
This has the same behaviour as other dtbs. WiFi connects then fails after a few seconds of playback/data transfer.
If you are running LE Nand Internal Memory ? it wont work.
Changing the device tree from a previous NON WORKING device tree does not stick.
Read #7
I had to do a fresh Android install then working LE SD card install then SSH to install to nand. -
still can't turn on box with remote after turing it off and when streaming 1080p herts drop to 24.Smilez
I still don't know which box you are running ?
If your box is not powering up from remote i am guessing you have a NEXBOX A95X S905 ?
If this is your box then that is as good as you're going to get due to bad U-BOOT which these builds do not replace.You have adjust refresh rate turned on to match movie in your Kodi settings. This is normal for High Def 180p 24HZ movies played on your box.
It will change from whatever you have your GUI set at. It will change the Hertz to whatever the stream/movie is that you are playing. -
he means thisThis is obviously a DEV Build kszaq gave the link to test an issue with one or more boxes with an issue.
I have not needed to use it or was it explained to me what this build was aiming to fix and what box or boxes should try it.
Thanks for explaining what plikmuny is using.
That question Directly relating to that Dev Build must be addressed to those trying it.
I don't have the K1 and my box is not affected by the issues.
A lot of things going on there.
[hr]
kostaman: i tried and did SSH installation without problem. it is very easy.
Anyway, thanks for your time in helping me.
Can you Answer my other Queries from previous post ?You're welcome.
I think i have answered all i could right ?
Cheers -
I asked you have you tried latest development build dated 13.09.2016.
I don't know what this latest development dated version is ?
I am using 7.0.2.007 build (2016-09-07)
Regarding SSH method, can you write down the steps for me pls if possible with pics also ?
I am a Mac User so Terminal Application is part of my Operating System which i used and explained steps
post #19. Windows PC is only used by me when Amlogic Tools are required and the rest of it i have no idea. Sorry.
i have 007 on Nand, now SD card is refusing to boot up, i dont know why.
You say you have installed .007 (still no idea what that dev build 13.09.2016 is) on Nand Internal Memory so what is it you are trying to do with the SD Card if you already have LE installed ?.
How did you copy the realtek dtb file onto SD / Nand File system ? is it after installation or before ? or in which folder ? it is not clear for me.I installed fresh Android Factory ROM. Then i installed SD Card LE Version 7.0.2.007 build (2016-09-07)
Following kszaq instructions. I had to use the realtek wifi fix dtb : Downloaded the realtek wifi fix dtb renamed it to dtb.img and copied it to main folder of SD card - replaced the one on the SD Card that was on there AFTER burning the image. When you burn the image to SD Card there is a dtb.img on the card. You replace it with your device tree that you renamed dtb.img.
I tested and ran the SD Card LE version to make sure everything worked.
Then and ONLY then did i use SSH To install to NAND Internal memory.
I hope this makes it clearer on my procedure. -
Ye, but there they are talking only about wifi problems. My wifi is working good. Just that player is always freezingHow long is it working Good ? You are thinking it is working good until you play something then it is switching off and that is why your box is freezing.