Posts by michaelof

UNBELIEVABLE.....

DuckDuckGoed how to provide the requested debug log.
Enabled debugging via KODI, using the web/hmtl-based "remote control"

since then, WHYEVER, now, finally, after hours today testing and chatting in #libreelec (THANKS TO USER EuroTrash AGAIN FOR HIS GREAT HELP !!!)
my problem is *** SOLVED ***

Works now, as before in OpenELEC.

BUT: NO CLUE WHY NOW. As NOTHING changed...

Disabled debugging, enabled CEC again (was advised that CEC and IR sometimes leads to problems), ...: Whatever i do, even after several reboots, it's working stable now.

Weird, but cool

- Raspberry Pi 1 (B+)
- IR receiver on GPIO ports
- LibreELEC 7.0.2, upgraded from OpenELEC 6.0.3

As the officially documented upgrade way from OE to LE didn't work (system partition too small), I've followed the described way of installing LE from scratch to a new sd card and apply a "restore" of an OE backup to this new sd card

Everything works fine, except the IR remote control.

/storage/.config/lircd.conf was included and extracted from OE backup, content:

# Please make this file available to others
# by sending it to <[email protected]>
#
# this config file was automatically generated
# using lirc-0.9.1-git(default) on Fri Mar 25 13:30:52 2016
#
# contributed by
#
# brand:                       /storage/.config/lircd.conf
# model no. of remote control:
# devices being controlled by this remote:
#


begin remote


  name  /storage/.config/lircd.conf
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100


  header       9042  4479
  one           578  1673
  zero          578   544
  ptrail        572
  repeat       9037  2235
  pre_data_bits   16
  pre_data       0xFF
  gap          108006
  toggle_bit_mask 0x0


      begin codes
          key_up                   0xE01F
          key_down                 0xD02F
          key_left                 0x708F
          key_right                0x50AF
          key_ok                   0x609F
          key_exit                 0xC03F
      end codes


end remote

dmesg says:

# dmesg | grep lirc_rpi
[   12.283232] lirc_rpi: module is from the staging directory, the quality is unknown, you have been warned.
[   13.185469] lirc_rpi: auto-detected active low receiver on GPIO pin 18
[   13.185877] lirc_rpi lirc_rpi: lirc_dev: driver lirc_rpi registered at minor = 0
[   13.185897] lirc_rpi: driver registered!

irw command works fine, all keys from /storage/.config/lircd.conf are detected.

--> Within KODI, nothing works, no keys are detected. <--

As said in Header, IR remote control works fine with OE.

Any hints what might be wrong, how to get it working?

Thanks in advance,
Michael