Posts by sat4all


    Thank you for your hard work, and continuous improvements. The new features and enhancements are greatly appreciated, especially the new neural shaders 8)

    sat4all Thanks for testing and for the photo, good to hear that Dolby Vision works at every refresh rate on the GTX 1060 now.

    About HDR at 8 bits: your card and its driver can show a 10-bit picture (your RC5 log lists 10-bit and floating point formats for the display plane), but the 580 driver gives Kodi only 8-bit windows to draw in, and the driver sends HDR10 at the depth of that window. On the GTX 16 and later, with the 615 driver, Kodi draws in a floating point window and HDR10 goes out at 10 bits. So it is a limit of the way Kodi draws with the 580 driver, not of the card, and I'm looking at a way around it: drawing into a 10-bit buffer directly instead of a window. I can't promise it yet. What you see now is still HDR10 (PQ, BT.2020), with 8 bits per colour on the cable.

    Thank you for the detailed explanation! Hopefully, you're able to find a workaround in a future build. Fingers crossed!

    sat4all Thanks for the logs with the PC straight to the TV. They show the same thing as through the Denon: at 3840x2160 23.976 Hz the driver wants its own HDMI vendor InfoFrame for the mode and turns down the Dolby Vision frames (275 times there), so the receiver is not the cause. I said before that the EDID of the Denon was why the driver picked the HDMI VIC; with the TV directly it picks it too, so that part was wrong. The fix stays the same: the mode goes in the AVI InfoFrame instead, which leaves the vendor InfoFrame free for Dolby Vision. It is in the next version.

    Awesome, Thanks for tracking that down so quickly! Glad to hear the fix is already coming in the next version.

    sat4all Thanks, the logs show exactly what happens. Dolby Vision does start, but at 3840x2160 23.976 Hz the driver of your GTX 1060 wants to send its own HDMI vendor InfoFrame for that mode (the HDMI VIC of a 4K 24 Hz mode), and that is the same InfoFrame the Dolby Vision signal travels in. So the driver turns down every Dolby Vision frame, 268 times in two seconds, and then Hades goes back to HDR10, as it's meant to. That one is on Hades to handle: the way is to give the mode in the AVI InfoFrame instead, as Hades already does for HDR10+ on those modes, so the vendor InfoFrame stays free for Dolby Vision. Your Denon shows the PC its own EDID, which is why the driver picks the HDMI VIC there.

    Two things you can try meanwhile, and both tell me more: turn "Adjust display refresh rate" off so the video plays at 4K60, which has no HDMI VIC, and Dolby Vision should go out; and, if you can, connect the PC straight to the TV once.

    Indeed, disabling "Adjust display refresh rate" allows DV output to work. However, connecting the PC directly to the display doesn't change anything—DV output still fails when "Adjust display refresh rate" is ON.

    Thank You!