Posts by bubblegum57
-
-
I think Q200 is 2GB RAM 1GB network Q201 is 2GB RAM & 100MB network
-
maybe not, but you have nothing to lose.
-
What are you using to create the image?
i use rufus
-
You could try a low level format, eg Low Level Format and zero-filling
-
Try Low Level Format to zero fill the card, it will show any probelms with it
-
Not sure, but try running gparted from a bootable usb.
-
Then you need to go remote.conf repository to see if there is one you can use, or create your own one.
-
Or, ask the same question on AV forums Home Entertainment Computers | AVForums
-
Just get a mini pc or NUC, use that as TVH server & client.
use the amazon fire on the second tv.
-
use a keyboard to start to wizard, ssh to on, then wifi
then go to remote.conf repository
-
I recreated bootable sd card again, and LE loads now. But remote not working, can't proceed and configure.
Which version do you have?
For versions before 8.90.4 you need to turn on ssh with a keyboard, then get a remote conf from remote.conf repository
for versions after this, you need to read LE9.0 remote configs ir-keytable Amlogic devices
-
I'm not sure if I really understand you.
I have an old Celeron Nuc with a usb dvb-T tuner running tvhead, & a couple of android boxes as TVH clients, all running LibreELEC.
The Mecool KIII pro & Wetek have tuners
-
So, from downloads – LibreELEC
from the direct downloads, you have downloaded Generic AMD/intel/nvidia ?
you have then created the image using the tool on to a usb ?
then you have booted the pc from usb, then you have installed Libreelec to the pc hard drive?
-
Quoting myself above for context..........Just to say thanks for the replies and to confirm that in fact the 8.2 image did work fine with my remote on my Beelink MiniMXIII II and using the built in device tree. (I assumed I had to use gxl_p212_2g.dtb but it didn't need it and in fact broke the remote). As a side note I cant get version 8.90.4 to work with that device tree or the built in version so I guess I need mess about with the remote config (which is a shame and as its tricky, so I think i will stick with a working 8.2).
Thanks again
NO, you don't mess about with the remote conf. The new version 8.90.4 use a different way to get the remote working.
-
Ram & Ethernet
-
Have you got the correct device tree? Try another, I do not know which one you need.
-
Is "Neptune" a build? if so, you can't get any support here
