Posts by bubblegum57

As far as I am aware, if it runs ok on usb, you just ssh installtointernal & that's it, the dtb works on usb, so you don't need to change it.

Sometimes you have to installtointernal twice

Quote from Sonado

Hello,

I use an own VPN to connect two houses but the addon does not work, it connects to the vpn server but I can not connect to the other network's computers (in the server network). The files that I import with the "Import Wizard" into the addon are .opvn and ca.crt, the same ones I use with openvpn for android and they work correctly.

Do I have to do something else besides import the files and put username and password?.

Best regards and thanks.

I have a tcp.opvn & a udp.opvn along with the ca.cert for each site. Not sure if that is your problem.

Sorry, I pointed you to the wrong thread.

Search for remote conf, but this time look for the krypton builds one

Quote from crossrt

I have a x96 with S905x installed with the build 8.2.3.1 from kszaq.

And I using the gxl_p212_2g.dtb device tree.

It installed and run properly, but just the remote control of the x96 doesn't work at all.

Is there anything that I miss out? Any fixes or patch I should apply?

you are in the wrong thread, you need to read this thread remote.conf repository

A search would have found this [8.2.3.1] LibreELEC 8.0 for S805

The Vero website says free worldwide shipping. Not sure if there would be any customs duty

I am not sure that Libreelec can be updated to Coreelec.

I assume you have got Libreelec 8.2.2.1 running from a usb or sd card?

So, if I were you, I would do a fresh install of Coreelec on a different usb or sd, bear in mind, this might mean your remote will no longer work.You cannot use remote.conf on these builds, there is a totally different way to get the remote working.

Releases · CoreELEC/CoreELEC · GitHub

How to configure IR remote control - HowTo - CoreELEC Forums

I don't know the answer to your question, but you could install a user defined profile, you will need the servers you want, certificates etc

I don't use vpn for geo blocking. but I think there is a setting in zomboided's settings, to select a particular vpn server for a particular app.

In Kodi (Libreelec) Video, files, go to the folder, context, choose content, select none, exclude this folder from future scans?

Then it is well & truly, bricked.

You could google about how to repair a bricked box, have you tried to install the original firmware? Freaktab might be a good place to look

Read this [INDEX] LibreELEC community builds for Amlogic to choose the correct image, then choose the correct device tree based on the RAM & LAN speed

Once you have downloaded the correct image, then read the how to install, (install to sd/usb first)

[HOWTO + FAQ] Install community builds on S905/S905D/S905W/S905X/S912 device

IF, after you have read the instructions, & you are having problems, post back, but please read & try for yourself first

Quote from parslej

Never used this app. Will it produce smaller file backup size than real partition size?

In my case problem is not file size itself (I can still zip it) but more restore time

(win32 disk writer has to write every single byte on sd even if partition is mostly empty)

No, it won't reduce the size, it will clone the drive same as ghost, acronis etc

It is open source & can be run from a bootable cd/usb

If you get no further ideas, you can always try it, to see if it's fast enough for you

How about using clonezilla to clone to a separate sd card?

There is a couple of firmwares here beelink-mxiii-plus-android-media-player-amlogic-s812-2g-ram-8g-rom-2-4g-5-0g-802-11ac-wifi-bluetooth-xbmc-dlna---black-341224.html

one suggests you unzip & place on root of sd card, other uses burning tool method

also

KitKat 4.4 stock firmware Download for Beelink MXIII Plus TV Box – TV Box News

Quote from doggyofone

I am having a tough time trying to find the original recovery image for my MXIII Plus. If anyone has this and can share it I would appreciate the help.

I'm trying to use USB Burning tool to put the original firmware back on the box to clean up the U-boot (per balbes150's advice post #739). I have TWRP (which replaced the original recovery) on the MXIII, which seems to prevent me putting the MXIII into recovery mode so that I can use USB Burning Tool. USB Burning Tool does not find the MXIII. I have uninstalled and reinstalled USB Burning Tool and the drivers.

I'm not sure if there is a different way to get USB Burning Tool to recognize the MXIII, but if someone knows of one please let me know how.

Thanks for any advice and help.

Is this a Tronsmart? 16_mxiii-plus-android-tv-box-firmwares.html

try playing the movie, if it says it is not in the library, then delete.

If I delete a movie, it goes to the recycle bin, check that is empty.

Failing that, set content to none, it should then clean the library, then re select movies, then scan again

just reading this myself, I have not used vnc before

[Solved] Can't connect with Simple VNC server (aml-vnc)