Posts by tabs

Hi.
Can You say me which is the file where are saved the channels Group?when i format and reinstall os i restore configs and userdata folders but it restore only name of grups but they are empty

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

Quote from tabs

I'm only with buffer pvr problems?

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

Autoquote.

My problem of buffer and freeze appear to bè caused of wifi.

I connect ethernet and solve it.

With wifi box freeze in streaming and i have to unplug Power cable.

If i can help to solve it i am here

Thank you

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

I'm only with buffer pvr problems?

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

Quote from tabs

Thank you for the release!It is good.

Some problem when i switch/toggle fullscreen pvr , reload video.

I have two crash on start when arrive in home screen.
But it is normal for alpha version

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

I'm trying pvr and buffer is slow and block without restart

I'm trying same channels on kodi 17 on android and working fine

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

Thank you for the release!It is good.

Some problem when i switch/toggle fullscreen pvr , reload video.

I have two crash on start when arrive in home screen.
But it is normal for alpha version

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

Quote from kszaq

tabs If you can wait a bit, a build from me is coming soon.

Oh yes

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

Quote from tabs

not working

Quote from afl1

Fixed #1

Do you think to modify something or i have to wait "official"?

However thanks for your work!

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

Quote from afl1

Fixed #1

not working

Quote from afl1

Fixed #1

Thank you
Today i Will try it

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

Quote from afl1

FW is presented but without execute permission. I'll fix it in next release.

thank you!!!

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

Here dmegs log with the wifi error.
Can You see the problem?
[ 14.944244@3] aml_wifi wifi.30: [extern_wifi_set_enable] WIFI Enable! 234
[ 15.122186@2] libphy: stmmac-0:00 - Link is Up - 100/Full
[ 15.452284@3] sdio_reset_comm():
[ 15.485282@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[ 15.594299@0] sdio: clk 200000000 SDR mode tuning start
[ 15.594616@0] sdio: rx_tuning_result[0] = 10
[ 15.594916@0] sdio: rx_tuning_result[1] = 10
[ 15.595215@0] sdio: rx_tuning_result[2] = 10
[ 15.595512@0] sdio: rx_tuning_result[3] = 10
[ 15.595825@0] sdio: rx_tuning_result[4] = 10
[ 15.595837@0] sdio: best_win_start =0, best_win_size =5
[ 15.595849@0] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x2000
[ 15.595862@0] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x2000
[ 15.595934@0] sdioh_start: set sd_f2_blocksize 128
[ 15.596412@0]
[ 15.596412@0]
[ 15.596412@0] dhd_bus_devreset: == WLAN ON ==
[ 15.596567@0] F1 signature read @0x18000000=0x17224356
[ 15.601288@0] F1 signature OK, socitype:0x1 chip:0x4356 rev:0x2 pkg:0x2
[ 15.603124@0] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[ 15.603649@0] dhd_conf_read_nv_by_chip: nv_by_chip_count=7
[ 15.603658@0] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=0, name=nvram_ap6181.txt
[ 15.603664@0] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=1, name=nvram_ap6210.txt
[ 15.603671@0] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt
[ 15.603677@0] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=6, name=nvram_ap6255.txt
[ 15.603684@0] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt
[ 15.603690@0] dhd_conf_read_nv_by_chip: chip=0x4339, chiprev=1, name=nvram_ap6335.txt
[ 15.603696@0] dhd_conf_read_nv_by_chip: chip=0x4335, chiprev=1, name=nvram_bcm4335.txt
[ 15.603759@0] dhd_conf_read_config: mimo_bw_cap = 1
[ 15.604045@0] dhd_conf_read_config: bcn_timeout = 20
[ 15.604115@0] dhd_conf_read_config: kso_enable = 0
[ 15.604385@0] dhd_conf_read_config: PM = 0
[ 15.604652@0] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/brcm/fw_bcm4356a2_ag.bin
[ 15.604660@0] dhdsdio_download_firmware: set use_rxchain 0
[ 15.604664@0] dhdsdio_download_firmware: set txglomsize 40
[ 15.604670@0] sdioh_set_mode: set txglom_mode to multi-desc
[ 15.604674@0] Final fw_path=/lib/firmware/brcm/fw_bcm4356a2_ag.bin
[ 15.604679@0] Final nv_path=/lib/firmware/brcm/
[ 15.604683@0] Final conf_path=/lib/firmware/brcm/config.txt
[ 15.654041@0] dhdsdio_download_nvram: error reading nvram file: -21
[ 15.654056@0] _dhdsdio_download_firmware: dongle nvram file download failed
[ 15.654080@0] dhd_net_bus_devreset: dhd_bus_devreset: -35
[ 15.654087@0] dhd_prot_ioctl : bus is down. we have nothing to do
[ 15.654092@0] dhd_net_bus_devreset: dhd_bus_devreset: -35
[ 15.654122@0] wifi_platform_set_power = 0
[ 15.654127@0] ======== PULL WL_REG_ON LOW! ========
[ 15.654131@0] wl_android_wifi_on: Failed
[ 15.654135@0] dhd_open : wl_android_wifi_on failed (-35)
[ 15.654141@0] dhd_stop: Enter ffffffc064fbc000
[ 15.654144@0] wl_android_wifi_off in 1
[ 15.654148@0] wl_android_wifi_off in 2: g_wifi_on=0
[ 15.654151@0] wl_android_wifi_off out
[ 15.654155@0] dhd_stop: Exit
[ 15.654160@0] dhd_open: Exit ret=-1
[ 15.654189@2] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.267587@2] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 115200 to 2000000
[ 18.293233@0] Bluetooth: HCI UART driver ver 2.2
[ 18.293271@0] Bluetooth: HCI H4 protocol initialized
[ 18.293290@0] Bluetooth: HCI BCSP protocol initialized
[ 18.293308@0] Bluetooth: HCILL protocol initialized
[ 18.293325@0] Bluetooth: HCIATH3K protocol initialized
[ 18.293342@0] Bluetooth: HCI Three-wire UART (H5) protocol initialized

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

Someone use it with minix neo u1?

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

Quote from afl1

Update to Krypton 17.0 beta 4
LibreELEC-S905.aarch64-8.0-devel-20161026112345-r0004.img.gz

Release Notes:
- fix for realtek wifi chip

Is It not mine? (Minix neo u1)

Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

hi kszaq
sorry for my english and for the quastion!

i'm trying the af1 build krypton on my minix neo u1

all work...ethernet, bt, otg but not wifi!it doesn't show ssdi

i tryed 7.02.008 and all is ok! i

i use device tree of 7.0.2.008 gxbb_p200_2G_1Gbit.dtb
gxbb_p200_2G_1Gbit_OTG_Port.dtb

but wifi don't work

any ideas?

thank you

Quote from afl1

You have to wait for official build by kszaq.

ok thank you.

nothing to try before?

Quote from afl1

New test build version:
LibreELEC-S905.aarch64-8.0-devel-20161025132509-r0003.img.gz

Release Notes:
- fixed broken mpeg2 hw decoding, but my recommendation is to use mpeg2 hw decoding only for HD;
- patch for Geniatech HDstar DVB-S;

pvr's are still necessary to install from zip.

my wifi don't work also this build

Quote from kostaman

And OTG Port worked with this tree in Jarvis .008 ?

yes and also on "librelec kodi 17"

only things don't work is wifi on libreelec kodi 17

i use gxbb_p200_2G_1Gbit.dtb