Strange...what version are you on?I m on 4.3-1896 and all looks like it's working fine..
At the Moment for Testing 4.3 1896 but it also Happens on previous Versions in x86.
Regards
Nicolas
Posts by Nicolas
-
-
I'd like to try a 4.2.x version for the server but I don't know where to find it given that in the official repository I find only the client, not the server. I'm starting to think that the problem aren't the server and client versions but libreelec 9.2 as others report.
go to Install from repository>Libreelec Add-ons>Services Take a look at the end of the list there you'll find tvheadend 4.2.
Btw with 4.3 the mapped Channels list is Not useable . The top 35 Channels can't be modified. I guess that's a bug. If you select Something nothing Happens alsoe the width of the columns can't be Changed If you try that, all is messed Up. Happens with all Browsers i have tried so gar on x86.
Regards
Nicolas
-
I've successful used this several times but always included the Default Gateway.
+1 works flawless since years
-
Have you tried the official Tvheadend 4.2 Version?
4.3 still is Kind of Beta.
The Xbox Tuner seems to be Not the best solution i read a lot that people have trouble with it due to slightly Signal Changes ends in total loss of Signal.
About the Channel mapping in TVH. For example If you have Satellite there are 800- 2000+ Channels (depends on the sat's you are receiving) but there is No Problem to map Only the Channels you want and number them the way you Like.
Regards
Nicolas
-
Hello!
I guess you'll need a custom xorg.conf also I am Not Sure If LE 9 still Supports the GMA 950 cause it is 15 years old.
The User also Had to use a custom xorg config. Take a Look here:
8.0.1 frame skip with Intel GMA 950
There was once a document in Openelec Wiki on how configure xorg.conf but the Page is No longer working.
On LE Wiki I found nothing on xorg.conf. maybe someone can Help Here.
Regards
Nicolas
-
Hello!
I am Not Sure but does the RPI 3 Support 256gb SD cards.
Regards
Nicolas
-
Hello!
A little Bit more information would Help and is needed.
What Kind of TV Server (TVH, VDR, MePo, TVMosaic etc) or Service (IPTV etc) are you using?
Does the Server Run in the Same device or in a different one in your Network?
If you are using a TV Server, have you installed the coresponding PVR Add-on?
Regards
Nicolas
-
How could a fix/Patch for KODi 18.8 be in a previous build (18.7 LE 9.23)?
I guess you have to wait for KODi 18.8 LE 9.24 which is actualy being tested
See here:
"You should expect to find bugs and other random problems."
Regards
Nicolas
-
Hello rrajnoha
My Sony needs to be connected switched Off, then switched on. If Not, the camera doesn't Shows Up.
Maybe your camera needs this also.
Regards
Nicolas
-
Hello robert_cz!
As Klojum Said, the exact Hardware you are using would help.
From the generic Chipset Name I think it is Intel Mobile gm965 so the GPU is a GMA X3100 which has No VAAPI Support at all.
VAAPI is Supported since Intel G45 (GMA X4500).
You can Check this yourself If you search for GMA X3100 VAAPI.
Regards
Nicolas
-
Did you tried to Connect a different TV/display to it?
Is the odroid directly attached to a Display or is a AVR inbetween?
Regards
Nicolas
-
Hello Roman
Have you switched the camera to "USB storage" Mode?
If Not, try it should Work.
Regards
Nicolas
-
Sounds Like your TV's EDID is Not getting recognised or maybe incorrect.
Take a Look here:
Also See here (2nd Post from Chewitt in xrandr)
Bit of a noob (Nuc and resolution commands)
What Kind of device are you using?
X86, rpi etc
Regards
Nicolas
-
Hello!
Settings>system>Display
Take a Look here:
Settings/System/Display - Official Kodi Wiki
Regards
Nicolas
-
-
-
Hello hjkjt
I use the Backup Option from the LE Menu. If I have Changed Something or If I added stuff to the library and before and after a LE Update.
The Backup includes, mostly, the .kodi folder (also .cache and .config) so all your addons and configuration are saved. Before I do a Backup I also Clean the thubnails.
There was a Backup Add-on where you can include custom folders to the Backup. But the Most troublefree Backup is using the build in backup.
Restore is pretty easy.
1. Install LE with the Same Version as your backup
2. If you start with a fresh Install create the .restore folder, Put the Backup tarfile into it and reboot.
On a single system LE HTPC Setup (without a dedicated Server or with this being the pseudo Server) I did my Media Backups once a month manually. I Like offline Backups.
Regards
Nicolas
-
After enabling mouse support in Kodi, my K400 touchpad works just fine with my 3rd gen Intel NUC
+1
K400r works
K400 plus works
I have both an 2 NUC's
