Posts by lvasan

    Thanks for your feedback, I am finalizing the RC2, I will push the release tomorrow, regarding your issues :

    - FEL on transformer has been fixed
    - OSD player information is more stable
    - HDR10+ has been improved a lot, and since Hades is in GPLv2 I will audit the code and take what's work well.

    For the OSD with the quick switching, on my N100 it's clean, I do not have any issue, do you switch with the film paused?
    For the theme I will check what I am exposing to be better integrated with themes and if it's not possible to ensure a good visibility regardless of the theme I will fix my pannel and no theme will be applied


    Hi CroqueMr,

    Thanks for the update and looking forward to testing RC2!

    Regarding the OSD behavior:
    - **Pause vs Live:** The coordinate shrinking/flickering happens while the video is playing live (not paused), specifically when target luminance triggers HDR-to-DV Adaptive conversion.
    - **Hardware difference:** The N100 uses standard UHD (`i915`), while on Arc/Iris Xe hardware using the `xe` kernel driver, atomic modeset commits fail (`Admission checked (not committed)` in `dmesg`), leading to total signal loss on stop/refresh-rate changes.

    I'm traveling today, but the test machine is powered on and connected. Once you push RC2 tomorrow, I'll update via SSH and report back on whether the OSD and modeset stability hold on Arc/Xe!

    Thanks for your feedback, I am finalizing the RC2, I will push the release tomorrow, regarding your issues :

    - FEL on transformer has been fixed
    - OSD player information is more stable
    - HDR10+ has been improved a lot, and since Hades is in GPLv2 I will audit the code and take what's work well.

    For the OSD with the quick switching, on my N100 it's clean, I do not have any issue, do you switch with the film paused?
    For the theme I will check what I am exposing to be better integrated with themes and if it's not possible to ensure a good visibility regardless of the theme I will fix my pannel and no theme will be applied


    Hi brother do RC2 fixes my issues https://github.com/CroqueMr/libreelec-x86-DV/issues/73

    Thread Title:

    Intel Battlemage / Lunar Lake (xe driver) – Black screen on HDR10 playback and modeswitch freeze on DV-R1.0.0-RC1

    System & Hardware Details

    • Platform: x86_64 Mini-PC (Intel Lunar Lake / Battlemage graphics)
    • Kernel Driver: Intel xe DRM driver (bmg_guc, bmg_huc, fbcon: xedrmfb)
    • OS / Build: LibreELEC-Generic.x86_64-13.0-DV-R1.0.0-RC1 (CroqueMr build)
    • AV Chain: PC \rightarrow Denon AVR (HDMI Enhanced / Video Bypass) \rightarrow Sony OLED TV (HDMI Enhanced)
    • GUI Resolution: 3840x2160 @ 60Hz (EGL render method, Whitelist empty)

    Issues Encountered

    1. Dolby Vision Works, but Standard HDR10 Drops to Black Screen:
      • Dolby Vision Profile 7/8 content plays without issues via the DV RGB tunneling pipeline.
      • Attempting to start standard HDR10 content immediately drops the display to a blank/black screen.
      • Audio continues to play in the background, and SSH remains fully accessible.
    2. Handshake Lockup Tied to Dynamic Refresh Rate Switching:
      • When Adjust display refresh rate is set to On start / stop, initiating HDR10 playback results in an atomic DRM modeswitch failure.
      • If Adjust display refresh rate is set to Off, HDR10 video will start, but playback suffers from persistent 3:2 pulldown judder at 60Hz.
      • Even when playback starts with refresh rate matching enabled (using a 2.0s–2.5s pause delay), stopping the video drops the screen back to black because the driver fails to cleanly renegotiate from 24Hz HDR10 back to 60Hz SDR desktop.
    3. GBM / Atomic DRM Initialization Failures:
      • When switching display states, Kodi reports windowing failures:bool KODI::WINDOWING::GBM::CDRMUtils::OpenDrm(bool): No drm devices found
      • CWinSystemGbm::InitWindowSystem - failed to initialize Atomic DRM
      • critical <general>: CApplication::CreateGUI - unable to init windowing system

      • The kernel log indicates forced connector bindings:[drm] forcing HDMI-A-3 connector on

      • This setup appears to block dynamic atomic color-depth renegotiation (switching between 8-bit RGB and 10-bit YCbCr).
    4. Incompatibility with Generic Kernel Builds:
      • Attempting to update to standard mainline/generic builds (such as generic YBLOD 0.3.0) leads to total display loss on boot (/sys/class/drm does not register any card nodes) due to missing xe driver modules/patches for this generation of Intel silicon.
      • The system currently relies on the custom kernel patches present in DV-R1.0.0-RC1 just to expose the display output.

    Troubleshooting Steps Already Attempted

    • Confirmed Sony TV HDMI input is set to standard Enhanced format (not the Dolby Vision override mode).
    • Confirmed Denon AVR 4K/8K signal format is set to Enhanced with Video Mode: Bypass.
    • Cleaned out <resolutions> and <whitelist> blocks from guisettings.xml.
    • Tested with Render method set to 0 (EGL) and Pause after refresh change set to 2.5s.
    • Verified that stopping Kodi (systemctl restart kodi) immediately recovers the GUI over SSH.

    Questions / Request for Help

    1. Is there a stable kernel parameter or patch for the xe driver to allow atomic color-depth switching to 10-bit HDR without crashing the connector?
    2. Has anyone found a working combination of DRM plane settings or EDID overrides on Battlemage/Lunar Lake that prevents the display from dropping sync when exiting 24p HDR playback back to 60Hz SDR?

    Install dual boot, and try it by yourself. Don't forget, this is development. People are trying new things all the time here.

    egandt
    June 9, 2020 at 10:55 PM

    Bro but after all logs and LibreELEC screen appears and screen goes for blank forever