Posts by daviciuszar

INTEL/9462.NGWG.NV is a Wi-Fi - 802.11 Intel Wireless-AC 9462, 2230, 1x1 AC+BT, No vPro, with Diversity Antenna

https://www.mouser.es/ProductDetail/Intel/9462.NGWG.NV?qs=rkhjVJ6%2F3EL3NHykGoOM7w%3D%3D&srsltid=AfmBOoqmim3hVBCOWj-DaHLqjd24BM8dZyEDLtYb8gNrHu00L5brQoyk

if it is Wireless may be wifi or/and bluetooth controller, from specs INTEL/9462.NGWG.NV 802.11ac 1x1+BT, Cubi N JSL-001BEU

Cubi N JSL-001BEU.pdf

lsusb -v without devices plugged

dmesg and lsusb -t without devices plugged

dmesg.txt

lsusb -t

/sys/bus/usb/devices/1-8:1.0/bAlternateSetting: No such file or directory
/sys/bus/usb/devices/1-8:1.0/bInterfaceClass: No such file or directory
/sys/bus/usb/devices/1-8:1.0/bInterfaceNumber: No such file or directory
/sys/bus/usb/devices/1-8:1.0/bInterfaceProtocol: No such file or directory
/sys/bus/usb/devices/1-8:1.0/bInterfaceSubClass: No such file or directory
/sys/bus/usb/devices/1-8:1.0/bNumEndpoints: No such file or directory
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/8p, 480M
|__ Port 008: Dev 002, If 0, Class=[unknown], Driver=[none], 12M
|__ Port 008: Dev 002, If 1, Class=Wireless, Driver=[none], 12M
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/6p, 10000M

The previous dmesg.txt and lsusb -t are without any usbs plugged in

After wake up from suspend I get this message but remote is working in the 1-6 usb.

[45599.786262] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[45599.989638] usb 1-8: Device not responding to setup address.
[45600.192870] usb 1-8: device not accepting address 9, error -71
[45600.192910] usb 1-8: WARN: invalid context state for evaluate context command.
[45600.309542] usb 1-8: reset full-speed USB device number 9 using xhci_hcd
[45605.329506] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[45610.662805] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[45610.866106] usb 1-8: device not accepting address 9, error -62
[45610.866166] usb 1-8: USB disconnect, device number 9
[45610.982774] usb 1-8: new full-speed USB device number 10 using xhci_hcd
[45626.352648] usb 1-8: device descriptor read/64, error -110

I'll reboot now and test without devices and I'll run lsusb -t

I had to wait to post but this is the message after run lsusb-t, now remote is working but the message is

lsusb -t

/sys/bus/usb/devices/1-8:1.0/bAlternateSetting: No such file or directory
/sys/bus/usb/devices/1-8:1.0/bInterfaceClass: No such file or directory
/sys/bus/usb/devices/1-8:1.0/bInterfaceNumber: No such file or directory
/sys/bus/usb/devices/1-8:1.0/bInterfaceProtocol: No such file or directory
/sys/bus/usb/devices/1-8:1.0/bInterfaceSubClass: No such file or directory
/sys/bus/usb/devices/1-8:1.0/bNumEndpoints: No such file or directory
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/8p, 480M
|__ Port 008: Dev 002, If 0, Class=[unknown], Driver=[none], 12M
|__ Port 008: Dev 002, If 1, Class=Wireless, Driver=[none], 12M
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/6p, 10000M

if I disconnect the remote and insert it in the other usb 1-6 the message is:

[ 7552.322964] usb 1-7: USB disconnect, device number 2
[ 7556.815762] usb 1-6: new full-speed USB device number 8 using xhci_hcd
[ 7556.952836] input: HAOBO Technology USB Composite Device Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:4842:0001.0004/input/input12
[ 7557.089195] hid-generic 0003:4842:0001.0004: input,hidraw0: USB HID v2.01 Keyboard [HAOBO Technology USB Composite Device] on usb-0000:00:14.0-6/input2
[ 7557.090026] input: HAOBO Technology USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.3/0003:4842:0001.0005/input/input13
[ 7557.090112] hid-generic 0003:4842:0001.0005: input,hidraw1: USB HID v2.01 Mouse [HAOBO Technology USB Composite Device] on usb-0000:00:14.0-6/input3
[ 7557.090834] hid-generic 0003:4842:0001.0006: hiddev96,hidraw2: USB HID v2.01 Device [HAOBO Technology USB Composite Device] on usb-0000:00:14.0-6/input4

Tomorrow I 'll make more testing because now I'm recording and I can't restart computer to test things.

Bad luck dmesg and lsusb, the same problem.

dmesg

dmesg.txt

lsusb

lsusb.txt

ok, i'll backup all, update and check

With libreelec 11 I had no problems with USB, same device, remote control ir transmitter plugged only.

Greetings

I have only a remote control connected to the usb port, the remote control, is https://www.amazon.es/dp/B0C1TVL8RN?…asin_title&th=1

lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 4842:0001 HAOBO Technology USB Composite Device
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Thanks for your help

*edited by moderator*

Hello, I have this message every time I boot my mini PC MSI CUBI N JSL-001BEU x64 after libreelec 12.0 update, also when I use suspend fucntion usb ports are not working. Any ideas?

[ 29.071245] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[ 44.440549] usb 1-8: device descriptor read/64, error -110
[ 60.022974] usb 1-8: device descriptor read/64, error -110
[ 60.243095] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[ 75.818303] usb 1-8: device descriptor read/64, error -110
[ 91.399666] usb 1-8: device descriptor read/64, error -110
[ 91.619776] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[ 96.832354] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 97.035860] usb 1-8: Device not responding to setup address.
[ 97.239201] usb 1-8: device not accepting address 3, error -71
[ 97.239238] usb 1-8: WARN: invalid context state for evaluate context command.
[ 97.355927] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[ 102.381709] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 107.717581] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 107.920983] usb 1-8: device not accepting address 3, error -62
[ 107.921037] usb 1-8: USB disconnect, device number 3
[ 108.037709] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[ 123.414717] usb 1-8: device descriptor read/64, error -110
[ 138.994715] usb 1-8: device descriptor read/64, error -110
[ 139.214789] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[ 154.787737] usb 1-8: device descriptor read/64, error -110
[ 170.366966] usb 1-8: device descriptor read/64, error -110
[ 170.470373] usb usb1-port8: attempt power cycle
[ 170.857131] usb 1-8: new full-speed USB device number 6 using xhci_hcd
[ 176.012355] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 176.215829] usb 1-8: Device not responding to setup address.
[ 176.419147] usb 1-8: device not accepting address 6, error -71
[ 176.419187] usb 1-8: WARN: invalid context state for evaluate context command.
[ 176.535855] usb 1-8: new full-speed USB device number 7 using xhci_hcd
[ 181.561005] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 181.764463] usb 1-8: Device not responding to setup address.
[ 181.967780] usb 1-8: device not accepting address 7, error -71
[ 181.967819] usb 1-8: WARN: invalid context state for evaluate context command.
[ 181.967861] usb usb1-port8: unable to enumerate USB device

Greetings