Not sure if this is the place to get help with this plugin.
I'm running LE12 on a raspberry pi 5 using an argon one v3 case with an nvme installed.
my config.txt
C
# SPDX-License-Identifier: GPL-2.0-or-later
# Copyright (C) 2009-2014 Stephan Raue ([email protected])
# Copyright (C) 2016-present Team LibreELEC (https://libreelec.tv)
################################################################################
# Bootloader configuration
# config.txt version v1 (do not remove or change this line!)
################################################################################
# For more options and information see
# http://rpf.io/configtxt
################################################################################
# Don't send initial active source message.
# Avoids bringing CEC (enabled TV) out of standby and channel switch when
# rebooting.
hdmi_ignore_cec_init=1
[all]
################################################################################
# Use distroconfig-composite.txt instead of distroconfig.txt to enable
# composite video output.
# The composite video mode needs to be configured in cmdline.txt:
# For PAL add: video=Composite-1:720x576@50ie
# For NTSC add: video=Composite-1:720x480@60ie
################################################################################
include distroconfig.txt
#include distroconfig-composite.txt
# uncomment to enable infrared remote receiver connected to GPIO 18
#dtoverlay=gpio-ir,gpio_pin=18
dtparam=i2c=on
enable_uart=1
dtoverlay=gpio-ir,gpio_pin=23
usb_max_current_enable=1
dtparam=nvme
dtparam=pciex1_1=gen3
dtparam=i2c_arm=on
dtparam=i2c_vc=on
dtoverlay=i2c-bcm2708The I2C isn't detected.
The link to my log
https://paste.libreelec.tv/literate-snapper.log
I was previously trying the argon one libreelec script with some modifications
https://download.argon40.com/argonone-setup-libreelec.sh
all argonone services should be stopped and removed
still no fan control