Posts by minimoe

  • 7.0.3.010 build for S905/S905X

    Quote from redger


    it would be great if you could test these, and yuri's clip sample.ts and provide feedback ... just for my piece of mind :)

    thanks


    ΟΚ, I tested the clips and I saw the problems you described. The log is full of ffmpeg errors.

    Code
    T:545443455200 ERROR: ffmpeg[7EFEF6A0E0]: [h264] non-existing SPS 0 referenced in buffering period
T:545443455200 ERROR: ffmpeg[7EFEF6A0E0]: [h264] non-existing PPS 0 referenced
T:545443455200 ERROR: ffmpeg[7EFEF6A0E0]: [h264] non-existing SPS 0 referenced in buffering period
T:545443455200 ERROR: ffmpeg[7EFEF6A0E0]: [h264] non-existing PPS 0 referenced
T:545443455200 ERROR: ffmpeg[7EFEF6A0E0]: [h264] decode_slice_header error
T:545443455200 ERROR: ffmpeg[7EFEF6A0E0]: [h264] no frame!
T:545443455200 DEBUG: ffmpeg[7EFEF6A0E0]: [mpegts] parser not found for codec dvb_teletext, packets or times may be invalid.

    This is a wild guess but I think the problem is the teletext\subtitles streams in the files. They mess up the timings.

  • 7.0.3.010 build for S905/S905X

    ] redger

    First of all, I couldn't test your sample clips as the files are password protected.

    My box is a re-branded Mini M8S II 2GB/8GB, according to other fora. Video and audio go through an Onkyo AVR to my Panasonic TV

    I tested with 1080i50 H264 AC3 2.0 (BBCHD caps from 2011) without an issue
    I also tested with 720p50 H264 AC3 5.1, without issues again.

  • 7.0.3.010 build for S905/S905X

    Is there a way to make the Shadertoy screensaver work with 64bit LE?

    Code
    10:43:14 T:548385923072   DEBUG: ADDON: Dll Initializing - ShaderToy
10:43:14 T:548385923072   DEBUG: SECTION:LoadDLL(/storage/.kodi/addons/screensaver.shadertoy/screensaver.shadertoy.so)
10:43:14 T:548385923072   DEBUG: Loading: /storage/.kodi/addons/screensaver.shadertoy/screensaver.shadertoy.so
10:43:14 T:548385923072   ERROR: Unable to load /storage/.kodi/addons/screensaver.shadertoy/screensaver.shadertoy.so, reason: /storage/.kodi/addons/screensaver.shadertoy/screensaver.shadertoy.so: wrong ELF class: ELFCLASS32
10:43:14 T:548385923072    INFO: Called Add-on status handler for '4' of clientName:ShaderToy, clientID:screensaver.shadertoy (same Thread=no)
10:43:14 T:546459087072   DEBUG: Thread AddonStatus screensaver.shadertoy start, auto delete: true


    I had no problems with it when I ran the 32bit LE 7.03.010

  • 7.0.3.010 build for S905/S905X

    Quote from minimoe


    I installed 7.03.010-32bit to my new Cooleme MB1 (a re-branded Mini M8S II, I'm told). Audio & video go through HDMI to an Onkyo AVR and then to a Panasonic plasma TV.

    The original remote works fine, no problems with turning the box on and off. My Microsoft MCE remote on the other hand, has the same problem Jönke reported: only the arrows and the play/pause/stop buttons work (it works fine with 7.02.009).

    A slight problem with CEC communication: it works fine when I turn on the MB1 but, once I switch to TV and back to HDMI input, it stops working. I have to choose the box from the TV's CEC menu, then it comes back to life. Again, it works fine with 7.02.009.

    No other major problems with 010 but the two small annoyances I mentioned made me go back to 009 where everything works.

    I downgraded to 7.02.009 and then upgraded to LibreELEC-S905.aarch64-7.0-devel-20161212161011-r23559.
    Now my MCE remote works! :D

    CEC is still problematic but it doesn't matter to me now that I have a fully working MCE remote :)

    As always, kszaq I'm eternally grateful for your work.

  • 7.0.3.010 build for S905/S905X

    I installed 7.03.010-32bit to my new Cooleme MB1 (a re-branded Mini M8S II, I'm told). Audio & video go through HDMI to an Onkyo AVR and then to a Panasonic plasma TV.

    Installation went smoothly, once I found where the reset button was (no analog audio-out on the MB1)

    No lock-ups after 30 or so restarts

    DTS-MA, Dolby TrueHD and multichannel AAC pass through to the AVR without issues.

    The original remote works fine, no problems with turning the box on and off. My Microsoft MCE remote on the other hand, has the same problem Jönke reported: only the arrows and the play/pause/stop buttons work (it works fine with 7.02.009).

    A slight problem with CEC communication: it works fine when I turn on the MB1 but, once I switch to TV and back to HDMI input, it stops working. I have to choose the box from the TV's CEC menu, then it comes back to life. Again, it works fine with 7.02.009.

    No other major problems with 010 but the two small annoyances I mentioned made me go back to 009 where everything works.

  • 7.0.3.010 build for S905/S905X

    Quote from kszaq


    There is a very simple way to downgrade if you're using SD card: if you're using Windows you can use 7Zip to unpack .img.gz file down to first SD card partition content. Then simply replace kernel.img and SYSTEM on SD card with the ones that you unpacked.


    I installed the 32-bit 7.0.3.10 version. Is it safe to downgrade to 7.0.2.009 using this method?

  • Is there any working torrent client for LE?

    Quote from Ronflex


    Hello

    It's not working on Beelink MiniMXIII S905 running on 7.2.0-009 build.
    I tried the following build thoradia/7.0/S905/aarch64 at master · thoradia/thoradia · GitHub.
    The package are successfully installed, but there are not starting either within the GUI or cli.

    Daemon is not starting, if I launch manually the service I got the help options.

    Do you have any hint ?


    I did the same with my S805 box and I have the same problem: neither CLI or GUI works.
    In my case, the error message is transmission-daemon: Line 1: Syntax error: unexpected word (expecting ")" )

    Is the addon S905 specific?

  • [8.2.3.1] LibreELEC 8.0 for S805

    I updated my LE to the latest version.

    - The stuttering is reduced to a minimum but now I see a slow down of the frame rate from time to time (mainly with 23.976fps videos)

    - Some audio delay

    - CEC is not working with my Panasonic TV

    - Filmon is working, finally :)

    - Estuary New Gen is ugly (but I won't hold kszaq responsible for this ;) )

    All in all, I don't feel ready to replace my OE installation with LE yet. I'll get a S905X box next week to check that version too.