Posts by Kleiner

Quote from mglae

On the target device for individual configuration.

From the LE git root directory. It is changing linux.x86_64.conf

Many thanks. But I wanted more detailed answer. I use Linux appr 5 year only. And this operations very difficult for me

Where is /storage/.config/firmware/ ?
How can i use ./tools/adjust_kernel_config menuconfig for settings?
....

Quote from mglae

The five being disabled in the code. Use CONFIG_<option>=y:

Code

CONFIG_SCSI_ISCSI_ATTRS
CONFIG_ISCSI_TCP
CONFIG_ISCSI_BOOT_SYSFS
CONFIG_ISCSI_IBFT_FIND
CONFIG_ISCSI_IBFT

CONFIG_ISCSI_IBFT_FIND" not found in linux.x86_64.conf . May i build without it ?

Quote from mglae

The five being disabled in the code. Use CONFIG_<option>=y:

Code

CONFIG_SCSI_ISCSI_ATTRS
CONFIG_ISCSI_TCP
CONFIG_ISCSI_BOOT_SYSFS
CONFIG_ISCSI_IBFT_FIND
CONFIG_ISCSI_IBFT

It works. I builded image without CONFIG_ISCSI_IBFT_FIND and run iscsiadm in console, but cant make connection, becouse network card is not exist. Libreelec my network card not find.
Where is I can enable my network card (Marvel Yukon) and another card? Thx!

I marked params

CONFIG_MARVELL_PHY=y
CONFIG_MARVELL_10G_PHY=y
CONFIG_MARVELL_88Q2XXX_PHY=y
CONFIG_MARVELL_88X2222_PHY=y

in projects/Generic/linux/linux.x86_64.conf

No positive result.
Console Libreelec not find my network adapter.

What I must doing ?

Quote from mglae

iSCSI options in kernel config got lost over time. Therefore this code has no effect any more.

After manually enabling the options in projects/Generic/linux/linux.x86_64.conf iSCSI shoild work again.

Thanks. May be you ask me, wich modules need enabled? May make menu for this ?

Quote from heitbaum

This bit I can’t help with, as I haven’t used iscsi.

other operations systems like debian, windows can found iSCSI targets. The Libreelec installer cant load iSCSI driver in memory of PC.

Well. I booted from ISO , menu-setup not showed my target-iSCSI. I switched to concole, tried command :

iscsiadm -m dicscovery -t sendtargets -p 192.168.1.97:3260

Answer -
iscsiadm: Could not perform SendTargets discovery: iSCSI driver not found. Please make sure it is loade and retry

What I may do ?... May be need patch kernel or apply change in file kernel_options ?

I downgrading version gcc and g++ to default on my system, next this steps:

1.cd ~
2.git clone https://github.com/LibreELEC/LibreELEC.tv.git
3. cd LibreELEC.tv
4. wget https://github.com/LibreELEC/LibreELEC.tv/pull/9163.patch
5. git am 9163.patch
============================
Use: open-iscsi: fix build with gcc-14
.git/rebase-apply/patch:37: trailing whitespace.

.git/rebase-apply/patch:41: trailing whitespace.

.git/rebase-apply/patch:43: trailing whitespace.

.git/rebase-apply/patch:51: trailing whitespace.

.git/rebase-apply/patch:67: trailing whitespace.

warning: missed 2 errors in whitespace characters
warning: 7 lines added errors in whitespace characters.
============================

6.
#I enabled ISCSI_SUPPORT="no" to "yes" (number of str 197) in /LibreELEC.tv/distributions/LibreELEC/options

7. make -j 9 image

............a lot of processing.....
and error
[087/313] [FAIL] build gmp:host
----------------
I study error, this way https://gmplib.org/download/gmp/gmp-6.3.0.tar.xz is not availible. I searched source code and rewrite file /LibreELEC.tv/packages/devel/commons-lang3/package.mk . I changed in str 10 old web-site (https://gmplib.org/download/gmp) to https://ftp.gnu.org/gnu/gmp/ and go to terminal and run ---> make distclean

8. I make again

make -j 9 image

................a lot of processing
and error
[187/313] [FAIL] install nano:target

Same error, I done same actions that was early. Changed https://www.nano-editor.org/dist/v$%7BPKG_VERSION%25%25.%2A} to https://ftp.gnu.org/pub/gnu/nano/ in file ./packages/tools/nano/package.mk
After this i dont do -> make distclean, and simply run : make -j 9 image

9. I looked, what process continues, and stop process ctrl-x, type ---> make distclean and begin of start

make -j 9 image

And... Many time and... Image has been building. Great !!
Many thanks!! I will try this Image , check iSCSI ability and write here.
I found image in folder /LibreELEC.tv/target/ His name LibreELEC-Generic.x86_64-13.0-devel-20240810073238-ce21c51.img.gz

If it possible, make distributive supported boot by iscsi-disk , i cant build. many errors

I update gcc and g++ to version 14.1.0.

I tried lunch build (with fix and without fix(loading new git) ) , but not success.
Now error cmake (013/313)

Log of errors: /home/tod/LibreELEC.tv/build.LibreELEC-Generic.x86_64-13.0-devel/build/cmake-3.30.2/.x86_64-linux-gnu/Bootstrap.cmk/cmake_bootstrap.log
---------------------------------------------
FAILURE: scripts/build cmake:host during configure_host (package.mk)
*********** FAILED COMMAND ***********
../configure --prefix=${TOOLCHAIN} --no-qt-gui --no-system-libs -- -DCMAKE_C_FLAGS="-O2 -Wall -pipe -Wno-format-security" -DCMAKE_CXX_FLAGS="-O2 -Wall -pipe -Wno-format-security" -DCMAKE_EXE_LINKER_FLAGS="${HOST_LDFLAGS}" -DCMAKE_USE_OPENSSL=OFF -DBUILD_CursesDialog=0
**************************************
FAILURE: scripts/build cmake:host has failed!

The following log for this failure is available:
  /home/tod/LibreELEC.tv/build.LibreELEC-Generic.x86_64-13.0-devel/.threads/logs/13.log

>>> cmake:host seq 13 >>>
[013/313] [FAIL] build   cmake:host

I installed cmake, but not success.

Thx.
On the computer where I am building libreelec (x64 Ubuntu 22.04 - 64bit) is installed. At the moment I am compiling gcc-14, because... This fix, as I understand it, requires version 14. The terminal showed this: Application: open-iscsi: fix build with gcc-14.
I try it and write here.

Quote from heitbaum

PR is here. https://github.com/LibreELEC/LibreELEC.tv/pull/9163

Sorry, I noticed that the topic is about raspberry pi 3, but I'm running libreelec from an x86-64 HP laptop. I'm trying the instructions https://wiki.libreelec.tv/development/build-basics#rebuilding . Can help me ? Thx