Hmmm, having said that it has now started playing up again after a few media scans and reboots... there must be something which gets corrupted. Bluetooth is on, shows my bluetooth remote, but it can't connect & the supplied IR remote 'OK' key is flakey (it's like its not polled 100% of the time - needs multiple clicks, there's no issue with it normally). I use a a custom .hwdb for my bluetooth remote, installed the Aeon MQ skin, but otherwise no other changes.
Posts by O'Brother
-
-
Hi dtech
I remade the Wetek Hub SD image and tried again and all works fine - not sure what happened the first time.
Cheers
-
Hi, I tried your latest build (9.2.8.12) on my Wetek Hub and there seems to be issues with the supplied IR remote - sometimes the select button doesn't work or seems to be double pressed etc. I also couldn't pair an alternative bluetooth remote as I couldn't get it detected under the bluetooth. Neither of these are issues on the original 9.2.8. I didn't test anything else given the difficulty in control. Cheers
-
This (thread) isn't resolved yet. Cheers
-
Both logs show that playback starts in 2.0 pass-through then TrueHD/DTS-MA are detected and AESinkALSA renegotiates to output with 7.1 output. Kodi appears to be doing the right thing here. What spec is the HDMI cable?
It's a recent premium/4k one - it passes HD audio fine with the v9 CoreELEC/LibreELEC images.
I just saw in the AMLogic section that someone is reporting the same issue with a Mecool box with a S912 Soc using v11/v12 LibreELEC.
Cheers
-
Log after TrueHD Atmos file playback:
https://paste.libreelec.tv/next-cat.log
Log after DTS-MA file playback:
-
Just confirmed the last LibreELEC v9.0.2 for the WeTek Hub passes both the hidef Dolby/DTS bitstreams. Let me know if want any particular logs etc from the v11 build.
-
IIRC the S905 chip in the Hub does not support the HD formats so cannot pass them through. The DD+/TrueHD streams contain a DTS (5.1) core with additional metadata; the core stream provides compatibility with hardware that doesn't support the full format so you still hear something.
No, CoreElec v9.2 was able to passthrough TrusHD/DTS-HD fine on the Hub (I haven't tried the v9 libreELEC) - this was the only reason I originally bought the Hub.
QuoteNote: no need to rename files if following the wiki instructions to create AMLGX "box" SD cards.
I used the specific Wetek Hub image.
Cheers
-
Just confirmed no passthrough DTS-HD / MA either.
(DD+ Atmos, DTS & DD OK)
-
Hi,
Stable 11.0.4 Wetek Hub image (Note: need to rename the SD image files to dtb.img, kernel.img & kernel.img.md5 for it to boot).
Made sure the video player sync was turned off, ALSA HDMI driver selected, all passthrough options turned on.
Cheers
