Posts by Grzesb

Grzesb · Zerotier disconnects Grzesb December 4, 2023 at 6:35 AM

After this I can connect with VNC but nothing can do.

Grzesb · Need file meson8m2_KII.dtd Grzesb November 29, 2023 at 7:54 AM

How can I use this patch ? I don't know.

Grzesb · Need file meson8m2_KII.dtd Grzesb November 29, 2023 at 7:27 AM

I have two M8S+, one runs under LE 9.2.8.12 but second box I want run armbian or something else with full Linux. But it do not run with DTS files that I have.

Grzesb · Need file meson8m2_KII.dtd Grzesb November 29, 2023 at 5:34 AM

Used and not found.

Grzesb · Need file meson8m2_KII.dtd Grzesb November 28, 2023 at 4:28 PM

Hi i need a file meson8m2_KII.dtd or/and meson8m2_KII.dts.

For M8s+ .

Grzesb · Zerotier disconnects Grzesb November 15, 2023 at 9:36 AM

I have read only system https://libreelec.dtech.hu/images/S8X2/

Grzesb · Zerotier disconnects Grzesb November 15, 2023 at 7:38 AM

Ok I know why, all because of HDMI not connected.

I have dobę some code at autostart.sh and in config.txt.

But I do not know how to do it on other way.

I want run LE without any HDMI.

But when cat /sys/class/amhdmitx/amhdmitx0/disp_cap > /storage/.kodi/userdata/disp_cap

Vnc is running Blackscreen.

Grzesb · Zerotier disconnects Grzesb November 10, 2023 at 10:18 AM

Code

I think this is a problem with the interface connection itself.
After all, VNC using the zerotier IP address 192.168.194.53 should work immediately after connecting to the VPN network.
And VNC to the address 192.168.194.53 connects, the Kodi screen appears very slowly, I can click maybe once or maybe twice and it hangs. Reconnecting will also work the same.

Grzesb · Zerotier disconnects Grzesb November 9, 2023 at 11:42 AM

Hi I have LibreElec 9.2.8.11 with zerotier.

It is connected to zerotier network but I have problem with connetion working. Putty works longer (but connection is very slow and after some time is dropping) and Vnc sometimes I can move coursor one or two times and connection freezes. connect

Ping is high and connections are dropped.

zerotier-one.ctl -q info

200 info 97xfxxx198 1.4.6 ONLINE

route

Kernel IP routing table

Destination Gateway Genmask Flags Metric Ref Use Iface

default DLink.home 0.0.0.0 UG 0 0 0 wlan0

192.168.5.0 * 255.255.255.0 U 0 0 0 wlan0

192.168.5.1 * 255.255.255.255 UH 0 0 0 wlan0

192.168.194.0 * 255.255.255.0 U 0 0 0 ztbto32yyo

/storage/.config/iptables.rules

iptables -F

sysctl -w net.ipv4.ip_forward=1

sysctl -w net.ipv4.conf.all.forwarding=1

sysctl -w net.ipv4.conf.all.rp_filter=2

iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE

iptables -A FORWARD -i zt+ -j ACCEPT

it is not in docker